PCE Installation tester PCE-ITE 55B

The installation tester is a multifunctional measuring device that is suitable for testing electrical safety in accordance with the EN 61557 and DIN VDE 0100 standards. It offers many functions that are specially designed for testing and evaluating electrical installations. The installation tester can perform a precise measurement of the insulation resistance between live parts and earth. The RCD test can efficiently test type A as well as AC, B, B+ and F-controlled residual current circuit breakers. This ensures the proper functioning of these vital protective devices. The installation tester enables quick and accurate measurement of the loop resistance to ensure that there is sufficient resistance to guarantee safe disconnection in the event of a residual current. In addition, a measurement of the protective conductor resistance enables the continuity of conductors and connections to be checked. A graphical representation of the wiring helps the operator to carry out measurements correctly.

The brightness of the display can be adjusted in 4 levels. An adjustable alarm tone warns of errors or if the limit value is exceeded. The adjustable switch-off time of the installation tester can be used to prevent unintentional discharging of the batteries. The device is supplied with test leads that meet the specific requirements of CAT III / 600 V and CAT IV / 300V. The installation tester offers a user-friendly interface, clear display elements and a robust design to meet the requirements of different environments. By complying with international standards, it ensures safe and reliable evaluation of electrical installations in accordance with the highest industry standards.
With our optional EVSE test adapters, tests can also be carried out on wall boxes and charging stations for electric vehicles.
AC voltage AC
Measuring range 0 ... 550 V
Resolution 1 V
Accuracy ±(2 % v.Mw. +2 digits)
Insulation resistance
Test voltage DC 50 V
Measuring range 0.1 ... 80 M Ω
Resolution 0.001 M Ω
Accuracy ±(5 % of Mw. +3 digits)
Insulation resistance
Test voltage DC 100 V, 250 V
Measuring range 0.1 ... 199.9 M Ω
Accuracy ±(5 % v.Mw. +3 digits)
Insulation resistance
Test voltage DC 500 V, 1000 V
Measuring range 0.1 ... 199.9 M Ω
Resolution 0.001 M Ω
Accuracy ±(2 % of Mw. +3 digits)
Insulation resistance
Test voltage DC 500 V, 1000 V
Measuring range 200 ... 999 M Ω
Resolution 1 M Ω
Accuracy ±(10 % f.s.w.)
Circuit continuity test
Measuring range 0.1 ... 20 Ω
Continuity test
Measuring range 20 ... 1999 Ω
Impedance
Measuring range 0.25 ... 9999 Ω
Frequency
Measuring range 10 ... 499.9 Hz
Resolution 0.1 Hz
Accuracy 0.2 % +1 digit
General technical data
Display type TFT colour display
Display size 3.3 inch
Operating time 15 h
Automatic switch-off from ... to 0.5 ... 60 min.
Automatic switch-off can be deactivated Yes
RCD test current characteristic A, AC, B, B+, F
RCD tripping time 0 ... 500 ms
Touch voltage 0 ... 99.9 V
Menu language English (US), German




Battery 6 x 1.5 V AA battery , alkaline-manganese
Capacity 3000 mAh

Operating conditions 0 ... 40 °C , 0 ... 95 % r. h.Storage conditions -10 ... 70 °C , 0 ... 90 % r. H. Dimensions ( L x W x H ) 250 x 135 x 107 mmWeight 1300 g
1 x installation tester PCE-ITE 55B
1 x test cable for EU Schuko sockets
3 x test leads 1m
3 x test probes
3 x crocodile clips
1 x carrying strap
6 x 1, 5V AA batteries
1 x factory calibration certificate
1 x operating instructions
1 x carrying case