PCE Infrared thermometer PCE-MIR 20

The infrared thermometer has a measuring range of -50 ... +760 °C and therefore covers a wide temperature range. With an accuracy of ±2 % ±2 °C at 20 ... 760 °C, the infrared thermometer is a very precise measuring instrument. Two lasers are installed in the infrared thermometer for better orientation of the measuring spot. Both lasers have an output power of <1 mW. To determine different surfaces with the infrared thermometer, the emission value can be set between 0.10 ... 1.00.

With the limit value alarm function on the infrared thermometer, a minimum temperature and a maximum temperature can be set individually. If the temperature exceeds or falls below the set limit value during a measurement with the infrared thermometer. This is immediately signalled acoustically and visually by the infrared thermometer.

To switch on the infrared thermometer, the measurement button must be pressed. The measurement is then immediately recorded by the infrared thermometer. If the button is released, the last value remains on the infrared thermometer display until a new measurement is taken. The infrared thermometer can optionally be equipped with an ISO calibration certificate.
General technical data



Battery 1 x 1.5 V 9V block, alkaline-manganese
Capacity 640 mAh

Operating conditions 0 ... 50 °C , 0 ... 90 % r. h.Storage conditions -10 ... 60 °C , 0 ... 80 % r. H.Dimensions ( L x W x H ) 175 x 75 x 35 mmWeight 132 g
1 x Infrared thermometer PCE-MIR 20
1 x Carrying bag
1 x Operating instructions