zoom_in
zoom_out
fullscreen
-21%
PCE hardness tester PCE-HT-225A
Sku: T-910044
€317.05 (excl. legal VAT, excl. Shipping)
€399.91 MSRP
In stock,ready for shipping within 24h
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-910046 | hardness tester PCE-HT-75 | PCE-HT-75 |
Content:
1 Piece
Shipping:
€73.87 Versandservice to United Kingdom
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-910044
SKU manufacturer:
PCE-HT-225A
GTIN Code (EAN):
4250348700919
Weight:
1,77 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
A concrete test hammer based on the measuring principle of Schmidt. In addition to the essential use in the building and construction field, the easiest to use concrete test hammer is essentially used for other purposes in many other industries (winding hardness testing of products on a roll ...).
The test is performed under a test energy of 2.207 J, which is always the same. The initial kinetic rebound energy is given as a measure of concrete hardness / surface pressure or compressive strength (kg/cm² or converted to N/mm²) on the hardness tester. The quality of concrete is assessed mainly on the basis of its compressive strength, since this is directly decisive for the load-bearing behavior and durability of structures made of concrete.
Compressive strength is designated by a sequence of letters and numbers. Example: B 25 means that this is normal concrete with a compressive strength of 25 N/mm². There are various intermediate values up to the highest strength class B 55, so you can make a classification easily, quickly and accurately using the hardness tester. The concrete tester is always delivered factory calibrated when ordered, but can also be optionally (at extra cost) laboratory calibrated and equipped with an ISO test certificate / test certificate.
The test is performed under a test energy of 2.207 J, which is always the same. The initial kinetic rebound energy is given as a measure of concrete hardness / surface pressure or compressive strength (kg/cm² or converted to N/mm²) on the hardness tester. The quality of concrete is assessed mainly on the basis of its compressive strength, since this is directly decisive for the load-bearing behavior and durability of structures made of concrete.
Compressive strength is designated by a sequence of letters and numbers. Example: B 25 means that this is normal concrete with a compressive strength of 25 N/mm². There are various intermediate values up to the highest strength class B 55, so you can make a classification easily, quickly and accurately using the hardness tester. The concrete tester is always delivered factory calibrated when ordered, but can also be optionally (at extra cost) laboratory calibrated and equipped with an ISO test certificate / test certificate.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-21%
Colorimeter PCE-CSM 7
PCE-CSM 7
€3,100.00
€3,944.92 MSRP
-21%
Moisture Meter (Abs.) PCE-MMK 1
PCE-MMK 1
€396.34
€499.91 MSRP
-21%
PCE-MFM 2400 | High-precision magnetic field analyzer with an accuracy of 1% | Tesla and Gauss measurement
PCE-MFM 2400
€628.57
€799.91 MSRP
-21%
filling scale PCE-BSK 310
PCE-BSK 310
€233.82
€294.92 MSRP
-21%
Sound Level Dosimeter PCE-MND 10 Occupational Health and Safety Measurement |IEC 61252:2002 |70-40 dB (A,C)|90-140 dB (Z)
PCE-MND 10
€903.61
€1,149.91 MSRP
-21%
PCE-DPG 200 pressure sensor for water & gases measuring range 0..200 bar|1.4? NPT|2.5? display|Res. 0.1%
PCE-DPG 200
€265.50
€334.92 MSRP
-21%
Durometer PCE-1000N
PCE-1000N
€854.12
€1,086.89 MSRP
-21%
4-channel temperature data logger for thermocouples PCE-T 420
PCE-T 420
€336.88
€424.92 MSRP
-21%
drive-through scale PCE-SD 2000
PCE-SD 2000
€4,263.03
€5,424.92 MSRP
-21%
tachometer PCE-T 238
PCE-T 238
€179.12
€225.88 MSRP
-21%
PCE-MA 110 material moisture meter | +40 ... +199 °C | 110 g | heating time 1-199 min. adjustable | memory. 15 HP
PCE-MA 110
€746.46
€949.91 MSRP
-21%
Colorimeter PCE-CSM 10
PCE-CSM 10
€4,955.34
€6,305.88 MSRP
-21%
PCE-PH20WINE PH meter especially for wine and beer | data hold function | autom. Calibration|Auto Power Off
PCE-PH20WINE
€332.90
€419.91 MSRP
-21%
Industry - Stethoscope PCE-S 42
PCE-S 42
€353.52
€445.88 MSRP
-21%
Industry - Endoscope PCE-VE 350HR3
PCE-VE 350HR3
€1,492.98
€1,899.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE hardness tester PCE-HT-225A
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
A concrete test hammer based on the measuring principle of Schmidt. In addition to the essential use in the building and construction field, the easiest to use concrete test hammer is essentially used for other purposes in many other industries (winding hardness testing of products on a roll ...).
The test is performed under a test energy of 2.207 J, which is always the same. The initial kinetic rebound energy is given as a measure of concrete hardness / surface pressure or compressive strength (kg/cm² or converted to N/mm²) on the hardness tester. The quality of concrete is assessed mainly on the basis of its compressive strength, since this is directly decisive for the load-bearing behavior and durability of structures made of concrete.
Compressive strength is designated by a sequence of letters and numbers. Example: B 25 means that this is normal concrete with a compressive strength of 25 N/mm². There are various intermediate values up to the highest strength class B 55, so you can make a classification easily, quickly and accurately using the hardness tester. The concrete tester is always delivered factory calibrated when ordered, but can also be optionally (at extra cost) laboratory calibrated and equipped with an ISO test certificate / test certificate. T-910044 PCE-HT-225A 4250348700919 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-ht-225a-t-910044-4250348700919?dc=GB&cu=EUR 2026-09-16 317.05 United Kingdom GB DE 14
The test is performed under a test energy of 2.207 J, which is always the same. The initial kinetic rebound energy is given as a measure of concrete hardness / surface pressure or compressive strength (kg/cm² or converted to N/mm²) on the hardness tester. The quality of concrete is assessed mainly on the basis of its compressive strength, since this is directly decisive for the load-bearing behavior and durability of structures made of concrete.
Compressive strength is designated by a sequence of letters and numbers. Example: B 25 means that this is normal concrete with a compressive strength of 25 N/mm². There are various intermediate values up to the highest strength class B 55, so you can make a classification easily, quickly and accurately using the hardness tester. The concrete tester is always delivered factory calibrated when ordered, but can also be optionally (at extra cost) laboratory calibrated and equipped with an ISO test certificate / test certificate. T-910044 PCE-HT-225A 4250348700919 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-ht-225a-t-910044-4250348700919?dc=GB&cu=EUR 2026-09-16 317.05 United Kingdom GB DE 14