zoom_in
zoom_out
fullscreen
PCE hardness tester PCE-3000UL
Sku: T-909783
Discontinued item
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909783
SKU manufacturer:
PCE-3000UL
GTIN Code (EAN):
4250348719560
Weight:
0,94 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The UCI hardness tester PCE-3000UL can be used to quickly check the hardness of components even when installed.
The device impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure direction-independently from all spatial directions without a correction factor.
Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
In addition to the UCI measuring method, the PCE-3000 can also be equipped with a rebound test specimen. This allows the UCI hardness tester to be upgraded to a Leeb hardness tester. Thus, the user of the hardness tester can choose between two models the PCE-3000U with UCI hardness probe and the PCE-3000UL, which is supplemented by the Leeb hardness probe.
The device impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure direction-independently from all spatial directions without a correction factor.
Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
In addition to the UCI measuring method, the PCE-3000 can also be equipped with a rebound test specimen. This allows the UCI hardness tester to be upgraded to a Leeb hardness tester. Thus, the user of the hardness tester can choose between two models the PCE-3000U with UCI hardness probe and the PCE-3000UL, which is supplemented by the Leeb hardness probe.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
PCE-BSH 6000 calibratable school scale max. 6 kg|PC software opt.|Counting function g|kg|lb|ct|gn|gsm and much more.
PCE-BSH 6000
€174.24
€229.91 MSRP
-25%
AW tester PCE-WAM 10
PCE-WAM 10
€579.57
€771.89 MSRP
-24%
Temperature / humidity transmitter PCE-P18L
PCE-P18L
€106.22
€138.90 MSRP
-25%
Colorimeter PCE-CSM 5
PCE-CSM 5
€1,919.03
€2,555.88 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-25%
Borescope PCE-VE 380N
PCE-VE 380N
€1,614.20
€2,149.91 MSRP
-25%
1 + 3-phase power analyzer PCE-360 | RS-232 interface | PC cable | software | 512 K data logger
PCE-360
€1,257.56
€1,674.92 MSRP
-24%
Earth Tester PCE-ET 3000
PCE-ET 3000
€399.29
€526.89 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
building moisture meter PCE-PMI 4
PCE-PMI 4
€378.82
€499.91 MSRP
-25%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
€600.59
€799.91 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-25%
Thickness Gauge PCE-CT 80HP-FN2D5
PCE-CT 80HP-FN2D5
€743.24
€989.91 MSRP
-25%
display / built-in display PCE-BPD-U-46A
PCE-BPD-U-46A
€568.31
€756.89 MSRP
-25%
Drehmoment-Kalibrator
PCE-TCT 100
€4,223.32
€5,624.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE hardness tester PCE-3000UL
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The UCI hardness tester PCE-3000UL can be used to quickly check the hardness of components even when installed.
The device impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure direction-independently from all spatial directions without a correction factor.
Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
In addition to the UCI measuring method, the PCE-3000 can also be equipped with a rebound test specimen. This allows the UCI hardness tester to be upgraded to a Leeb hardness tester. Thus, the user of the hardness tester can choose between two models the PCE-3000U with UCI hardness probe and the PCE-3000UL, which is supplemented by the Leeb hardness probe. T-909783 PCE-3000UL 4250348719560 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-3000ul-t-909783-4250348719560?dc=GB&cu=EUR 2026-08-03 2601.55 United Kingdom GB DE 14
The device impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure direction-independently from all spatial directions without a correction factor.
Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
In addition to the UCI measuring method, the PCE-3000 can also be equipped with a rebound test specimen. This allows the UCI hardness tester to be upgraded to a Leeb hardness tester. Thus, the user of the hardness tester can choose between two models the PCE-3000U with UCI hardness probe and the PCE-3000UL, which is supplemented by the Leeb hardness probe. T-909783 PCE-3000UL 4250348719560 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-3000ul-t-909783-4250348719560?dc=GB&cu=EUR 2026-08-03 2601.55 United Kingdom GB DE 14