zoom_in
zoom_out
fullscreen
PCE hardness tester PCE-3000U
Sku: T-909782
Discontinued item
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909782
SKU manufacturer:
PCE-3000U
GTIN Code (EAN):
4250348716613
Weight:
0,94 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The UCI hardness tester PCE-3000 can be used to quickly check the hardness of components even when installed.
The device impresses with a large measuring range, easy handling, robust design and a temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester is equipped as standard with a manual test probe with a test force of 50 N. With this probe, measurements can be made from all spatial directions without a correction factor. Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece.
Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
The device impresses with a large measuring range, easy handling, robust design and a temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester is equipped as standard with a manual test probe with a test force of 50 N. With this probe, measurements can be made from all spatial directions without a correction factor. Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece.
Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
Refractometer PCE-0100 Salinity
PCE-0100
€64.92
€84.92 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-25%
lifting table scale / industrial scale PCE-HLTS 2T
PCE-HLTS 2T
€3,566.34
€4,749.91 MSRP
-25%
vehicle measuring device PCE-CT 80HP-FN3
PCE-CT 80HP-FN3
€747.02
€994.92 MSRP
-24%
PCE-DPG 100 Pressure Gauge Air Pressure & Water Pressure | PEAK function | 2.5? display | Response time <50 ms
PCE-DPG 100
€253.78
€334.92 MSRP
-24%
Installation aid PCE-HVAC 10
PCE-HVAC 10
€189.37
€249.91 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-25%
torque measuring device PCE-TM 80
PCE-TM 80
€619.37
€824.92 MSRP
-24%
Earth Tester PCE-ET 3000
PCE-ET 3000
€399.29
€526.89 MSRP
-25%
Closing Force Measuring Device Original BIA Cl. 1 for Bus and Train Doors
BIA1-SY-10-310
€2,654.92
€3,536.01 MSRP
-24%
sound level meter PCE-SLT-TRM
PCE-SLT-TRM
€269.71
€355.88 MSRP
-24%
PCE-CT 25FN coating thickness gauge for ferrous & non-ferrous metals, including calibration set
PCE-CT 25FN
€110.55
€145.88 MSRP
-25%
Borescope PCE-VE 380N
PCE-VE 380N
€1,614.20
€2,149.91 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-24%
mold measuring device PCE-PMI 1BT
PCE-PMI 1BT
€89.41
€116.89 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE hardness tester PCE-3000U
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The UCI hardness tester PCE-3000 can be used to quickly check the hardness of components even when installed.
The device impresses with a large measuring range, easy handling, robust design and a temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester is equipped as standard with a manual test probe with a test force of 50 N. With this probe, measurements can be made from all spatial directions without a correction factor. Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece.
Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry. T-909782 PCE-3000U 4250348716613 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-3000u-t-909782-4250348716613?dc=GB&cu=EUR 2026-08-03 2060.92 United Kingdom GB DE 14
The device impresses with a large measuring range, easy handling, robust design and a temperature resistance down to -20°C. In addition to hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester is equipped as standard with a manual test probe with a test force of 50 N. With this probe, measurements can be made from all spatial directions without a correction factor. Another advantage of the hardness tester is its NDT feature. At the tip of the probe is a Vickers diamond, which is excited in the ultrasonic frequency range. When the diamond touches the test piece surface during hardness testing, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece.
Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The UCI hardness tester is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of welds and inspection of components with complex geometry. T-909782 PCE-3000U 4250348716613 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-hardness-tester-pce-3000u-t-909782-4250348716613?dc=GB&cu=EUR 2026-08-03 2060.92 United Kingdom GB DE 14