zoom_in
zoom_out
fullscreen
-25%
PCE Force Measuring Stand PCE-HTS 50
Sku: T-910048
€1,254.54 (excl. legal VAT, excl. Shipping)
€1,670.88 MSRP
In stock,ready for shipping
Piece
Content:
1 Piece
Shipping:
€199.92 Versandservice to United Kingdom
For orders from €1,000.00 order total plus €34.45 Customs MRN registration
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-910048
SKU manufacturer:
PCE-HTS 50
GTIN Code (EAN):
4250348723574
Weight:
30,00 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The horizontal force measuring stand has a force range of 500 N. With a travel distance of 270 mm, tensile strengths of large or even elastic test specimens can be tested. The travel speed of the horizontal force gauge can be precisely adjusted in 1 mm/min steps between 1 ... 500 mm/min. Thus, the horizontal force gauge is used, for example, for quality testing of foils, rubber bands or ropes.
The travel speed and the travel mode of the horizontal force gauge can be set as desired. In manual mode, the horizontal force gauge only moves when the travel button is pressed. In automatic mode, this is done automatically. As soon as the clamping device has reached a limit switch, the horizontal force measuring stand stops automatically.
With the horizontal force gauge, the limit switches can be set as required. This means that the travel distance can be limited as desired. This has several advantages. The limitation can prevent the measuring device from moving into the chuck. Another advantage is that, depending on the application, the tensile length can be defined during a tensile test. In addition to the test stand, PCE Instruments also offers suitable force measurement systems that can be mounted to the horizontal force test stand. Optionally, different chucks are available for a wide range of testing tasks. Thus, a wide range of measurement tasks can be performed with a single measurement system.
The travel speed and the travel mode of the horizontal force gauge can be set as desired. In manual mode, the horizontal force gauge only moves when the travel button is pressed. In automatic mode, this is done automatically. As soon as the clamping device has reached a limit switch, the horizontal force measuring stand stops automatically.
With the horizontal force gauge, the limit switches can be set as required. This means that the travel distance can be limited as desired. This has several advantages. The limitation can prevent the measuring device from moving into the chuck. Another advantage is that, depending on the application, the tensile length can be defined during a tensile test. In addition to the test stand, PCE Instruments also offers suitable force measurement systems that can be mounted to the horizontal force test stand. Optionally, different chucks are available for a wide range of testing tasks. Thus, a wide range of measurement tasks can be performed with a single measurement system.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Product suggestions
-25%
AW tester PCE-WAM 10
PCE-WAM 10
€579.57
€771.89 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-25%
display / built-in display PCE-BPD-U-46A
PCE-BPD-U-46A
€568.31
€756.89 MSRP
-25%
Coating Thickness Gauge PCE-CT 80HP-FN1D5
PCE-CT 80HP-FN1D5
€725.97
€966.89 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-25%
Hydraulic lifting table - industrial scale PCE-HLTS 500
PCE-HLTS 500
€3,266.01
€4,349.91 MSRP
-23%
current transducer PCE-P17I
PCE-P17I
€53.95
€69.91 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
-24%
PCE-DPG 100 Pressure Gauge Air Pressure & Water Pressure | PEAK function | 2.5? display | Response time <50 ms
PCE-DPG 100
€253.78
€334.92 MSRP
-24%
PCE-CT 25FN coating thickness gauge for ferrous & non-ferrous metals, including calibration set
PCE-CT 25FN
€110.55
€145.88 MSRP
-25%
torque measuring device PCE-TM 80
PCE-TM 80
€619.37
€824.92 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT for surfaces
PCE-ATP 1-KIT
€1,253.82
€1,669.91 MSRP
-24%
Installation aid PCE-HVAC 10
PCE-HVAC 10
€189.37
€249.91 MSRP
-25%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
€600.59
€799.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Force Measuring Stand PCE-HTS 50
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The horizontal force measuring stand has a force range of 500 N. With a travel distance of 270 mm, tensile strengths of large or even elastic test specimens can be tested. The travel speed of the horizontal force gauge can be precisely adjusted in 1 mm/min steps between 1 ... 500 mm/min. Thus, the horizontal force gauge is used, for example, for quality testing of foils, rubber bands or ropes.
The travel speed and the travel mode of the horizontal force gauge can be set as desired. In manual mode, the horizontal force gauge only moves when the travel button is pressed. In automatic mode, this is done automatically. As soon as the clamping device has reached a limit switch, the horizontal force measuring stand stops automatically.
With the horizontal force gauge, the limit switches can be set as required. This means that the travel distance can be limited as desired. This has several advantages. The limitation can prevent the measuring device from moving into the chuck. Another advantage is that, depending on the application, the tensile length can be defined during a tensile test. In addition to the test stand, PCE Instruments also offers suitable force measurement systems that can be mounted to the horizontal force test stand. Optionally, different chucks are available for a wide range of testing tasks. Thus, a wide range of measurement tasks can be performed with a single measurement system. T-910048 PCE-HTS 50 4250348723574 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-force-measuring-stand-pce-hts-50-t-910048-4250348723574?dc=GB&cu=EUR 2026-07-13 1254.54 United Kingdom GB DE 14
The travel speed and the travel mode of the horizontal force gauge can be set as desired. In manual mode, the horizontal force gauge only moves when the travel button is pressed. In automatic mode, this is done automatically. As soon as the clamping device has reached a limit switch, the horizontal force measuring stand stops automatically.
With the horizontal force gauge, the limit switches can be set as required. This means that the travel distance can be limited as desired. This has several advantages. The limitation can prevent the measuring device from moving into the chuck. Another advantage is that, depending on the application, the tensile length can be defined during a tensile test. In addition to the test stand, PCE Instruments also offers suitable force measurement systems that can be mounted to the horizontal force test stand. Optionally, different chucks are available for a wide range of testing tasks. Thus, a wide range of measurement tasks can be performed with a single measurement system. T-910048 PCE-HTS 50 4250348723574 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-force-measuring-stand-pce-hts-50-t-910048-4250348723574?dc=GB&cu=EUR 2026-07-13 1254.54 United Kingdom GB DE 14