zoom_in
zoom_out
fullscreen
PCE flow meter PCE-TDS 100H
Sku: T-910254
Discontinued item
doneMade in Germany
Ultrasonic flowmeter PCE-TDS 100H using the transit time difference method
for determination of flow velocity and flow rate
Measurement method for liquids as homogeneous as possible
for determination of flow velocity and flow rate
Measurement method for liquids as homogeneous as possible
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-910254
SKU manufacturer:
PCE-TDS 100H
GTIN Code (EAN):
4250348708175
Weight:
2,70 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The ultrasonic flowmeter is required within the scope of a control measurement or for the quick determination of the flow in a pipeline and is therefore a transportable / easy to install measuring system. The ultrasonic flowmeter works according to the transit time difference method. The measuring principle of the flowmeter is quite simple.
When measuring a pipe obliquely with the flow, it takes less time than when measuring against the flow. The stronger the flow becomes, the longer it takes against it and the faster it becomes with it. The difference between the flow times with the flow or against it is therefore directly dependent on the flow velocity of the river. The flowmeter uses this effect to determine the flow velocity and flow rate.
In this process, electro-acoustic transducers (Piëzo effect”) transmit and receive short ultrasonic pulses through the medium flowing in the pipe. The transducers are located longitudinally offset on both sides of the measuring tube. The non-destructive sensors are placed on the pipe and fastened, for example, by means of a cable tie. Within a short time, the display shows the flow velocity. The ultrasonic flowmeter can be used for measurement on metallic pipes, plastic pipes or rubber pipes.
When measuring a pipe obliquely with the flow, it takes less time than when measuring against the flow. The stronger the flow becomes, the longer it takes against it and the faster it becomes with it. The difference between the flow times with the flow or against it is therefore directly dependent on the flow velocity of the river. The flowmeter uses this effect to determine the flow velocity and flow rate.
In this process, electro-acoustic transducers (Piëzo effect”) transmit and receive short ultrasonic pulses through the medium flowing in the pipe. The transducers are located longitudinally offset on both sides of the measuring tube. The non-destructive sensors are placed on the pipe and fastened, for example, by means of a cable tie. Within a short time, the display shows the flow velocity. The ultrasonic flowmeter can be used for measurement on metallic pipes, plastic pipes or rubber pipes.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
PCE-432-SC 09 Portable professional sound calibrator class 1 incl. sound level meter with GPS class 1
PCE-432-SC 09
€2,169.83
€2,889.91 MSRP
-25%
lifting table scale / industrial scale PCE-HLTS 2T
PCE-HLTS 2T
€3,566.34
€4,749.91 MSRP
-25%
1 + 3-phase power analyzer PCE-360 | RS-232 interface | PC cable | software | 512 K data logger
PCE-360
€1,257.56
€1,674.92 MSRP
-24%
Radon Monitor
PCE-RD 75
€143.91
€189.91 MSRP
-24%
Borescope PCE-VE 200SV1
PCE-VE 200SV1
€363.69
€479.92 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-25%
Drehmoment-Kalibrator
PCE-TCT 100
€4,223.32
€5,624.92 MSRP
-25%
Thickness Gauge PCE-CT 80HP-FN2D5
PCE-CT 80HP-FN2D5
€743.24
€989.91 MSRP
-24%
PCE-CT 25FN coating thickness gauge for ferrous & non-ferrous metals, including calibration set
PCE-CT 25FN
€110.55
€145.88 MSRP
-23%
current transducer PCE-P17I
PCE-P17I
€53.95
€69.91 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT for surfaces
PCE-ATP 1-KIT
€1,253.82
€1,669.91 MSRP
-24%
Durometer PCE-DX-AS
PCE-DX-AS
€108.28
€142.90 MSRP
-25%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
€600.59
€799.91 MSRP
-24%
mold measuring device PCE-PMI 1BT
PCE-PMI 1BT
€89.41
€116.89 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE flow meter PCE-TDS 100H
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The ultrasonic flowmeter is required within the scope of a control measurement or for the quick determination of the flow in a pipeline and is therefore a transportable / easy to install measuring system. The ultrasonic flowmeter works according to the transit time difference method. The measuring principle of the flowmeter is quite simple.
When measuring a pipe obliquely with the flow, it takes less time than when measuring against the flow. The stronger the flow becomes, the longer it takes against it and the faster it becomes with it. The difference between the flow times with the flow or against it is therefore directly dependent on the flow velocity of the river. The flowmeter uses this effect to determine the flow velocity and flow rate.
In this process, electro-acoustic transducers (Piëzo effect”) transmit and receive short ultrasonic pulses through the medium flowing in the pipe. The transducers are located longitudinally offset on both sides of the measuring tube. The non-destructive sensors are placed on the pipe and fastened, for example, by means of a cable tie. Within a short time, the display shows the flow velocity. The ultrasonic flowmeter can be used for measurement on metallic pipes, plastic pipes or rubber pipes. T-910254 PCE-TDS 100H 4250348708175 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-flow-meter-pce-tds-100h-t-910254-4250348708175?dc=GB&cu=EUR 2026-07-10 1047.31 United Kingdom GB DE 14
When measuring a pipe obliquely with the flow, it takes less time than when measuring against the flow. The stronger the flow becomes, the longer it takes against it and the faster it becomes with it. The difference between the flow times with the flow or against it is therefore directly dependent on the flow velocity of the river. The flowmeter uses this effect to determine the flow velocity and flow rate.
In this process, electro-acoustic transducers (Piëzo effect”) transmit and receive short ultrasonic pulses through the medium flowing in the pipe. The transducers are located longitudinally offset on both sides of the measuring tube. The non-destructive sensors are placed on the pipe and fastened, for example, by means of a cable tie. Within a short time, the display shows the flow velocity. The ultrasonic flowmeter can be used for measurement on metallic pipes, plastic pipes or rubber pipes. T-910254 PCE-TDS 100H 4250348708175 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-flow-meter-pce-tds-100h-t-910254-4250348708175?dc=GB&cu=EUR 2026-07-10 1047.31 United Kingdom GB DE 14