zoom_in
zoom_out
fullscreen
PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
Sku: T-909996
Discontinued item
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909996
SKU manufacturer:
PCE-EVSE 300
GTIN Code (EAN):
4250348727541
Weight:
1,00 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
Hinweise zur Batterieentsorgung:
Da in unseren Sendungen Batterien und Akkus enthalten sein können, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:
- Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet.
- Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und können verwertet werden.
- Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen oder in unserem Lager) unentgeltlich zurückgeben.
- Die Abgabe in Verkaufsstellen ist dabei für Endnutzer auf die übliche Mengen sowie solche Altbatterien beschränkt, die der Vertreiber als Neubatterien in seinem Sortiment führt oder geführt hat.
- Das Zeichen mit der durchgekreuzten Mülltonne bedeutet, dass Sie Batterien und Akkus nicht im Hausmüll entsorgen dürfen
Unter diesen Zeichen finden Sie zusätzlich nachstehende Symbole mit folgender Bedeutung:
- Pb = Batterie enthält mehr als 0,004 Masseprozent Blei
- Cd = Batterie enthält mehr als 0,002 Masseprozent Cadmium
- Hg = Batterie enthält mehr als 0,0005 Masseprozent Quecksilber
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
sound level meter PCE-SLT-TRM
PCE-SLT-TRM
€269.71
€355.88 MSRP
-25%
Defectoscope PCE-FD 20
PCE-FD 20
€3,452.98
€4,598.90 MSRP
-25%
AW tester PCE-WAM 10
PCE-WAM 10
€579.57
€771.89 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-25%
vehicle measuring device PCE-CT 80HP-FN3
PCE-CT 80HP-FN3
€747.02
€994.92 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-24%
mold measuring device PCE-PMI 1BT
PCE-PMI 1BT
€89.41
€116.89 MSRP
-25%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
€600.59
€799.91 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
-24%
PCE-HS 300N Digital Crane Scale Weighing range (max.) 300 kg | incl. shackle + hook | Accurate ±1% of Mb. | Metal | LCD
PCE-HS 300N
€76.39
€99.91 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-24%
Borescope PCE-VE 200-S
PCE-VE 200-S
€431.89
€569.91 MSRP
-24%
Earth Tester PCE-ET 3000
PCE-ET 3000
€399.29
€526.89 MSRP
-25%
Borescope PCE-VE 380N
PCE-VE 380N
€1,614.20
€2,149.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. T-909996 PCE-EVSE 300 4250348727541 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=GB&cu=EUR 2026-08-01 322.77 United Kingdom GB DE 14
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. T-909996 PCE-EVSE 300 4250348727541 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=GB&cu=EUR 2026-08-01 322.77 United Kingdom GB DE 14