PCE Digital measuring clamp PCE-MCM 10

The digital measuring clamp has a measuring range of ±99.9 mA DC. With an accuracy of 0.3 % of Mw. +8 digits, the digital measuring clamp is a particularly accurate measuring device. The digital measuring clamp itself is connected to a 1 metre cable for convenient measurements with the digital measuring clamp. The digital clamp meter can therefore be attached to the cable to be measured. The digital clamp meter itself can be conveniently placed on the workstation. This leaves both hands free while reading the measured values, for example to carry out adjustments or configurations on the process technology. Thanks to its high accuracy and external sensor, the digital clamp meter is ideal for carrying out fast and reliable current measurements on process signals.

In order to carry out a current measurement, the digital clamp meter must be clamped by the process current clamp around the cable to be checked. This allows the process current clamp to measure the flowing current inductively. This has the particular advantage that a current measurement can be carried out during operation with the digital measuring clamp.

The digital measuring clamp is equipped with an LED for improved visibility. The measuring point can be optimally illuminated with this LED on the digital measuring clamp. The digital measuring clamp can be optionally equipped with an ISO calibration certificate.
General technical dataProtection class (device) IP40

Battery 2 x 1.5 V AA battery, alkaline-manganese
Capacity 3000 mAh

Dimensions ( L x W x H ) 180 x 55 x 39 mmOther dimensions current clamp: 90 x 40 x 1.5 mm
1 x digital measuring clamp PCE-MCM 10
2 x 3 V / 2 AA batteries
1 x operating instructions