zoom_in
zoom_out
fullscreen
PCE-DFG NF 2K force transducer | measuring range 0..2000 N / 200 kg | resolution 2 N | 2.8? TFT graphic display
Sku: T-909948
Discontinued item
doneMade in Germany
Dynamometer PCE-DFG NF 2K with external load cell
USB interface
PC Software
USB interface
PC Software
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909948
SKU manufacturer:
PCE-DFG NF 2K
GTIN Code (EAN):
4250348719300
Weight:
1,71 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The dynamometer with an external load cell is designed for measuring compressive forces at measuring points that are difficult to access. The load cell is connected to the dynamometer by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The dynamometer or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The dynamometer can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the dynamometer until this value is exceeded or deleted. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or fallen short of, a signal is given in the dynamometer display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
The dynamometer can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the dynamometer until this value is exceeded or deleted. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or fallen short of, a signal is given in the dynamometer display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
Installation aid PCE-HVAC 10
PCE-HVAC 10
€189.37
€249.91 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
PCE-HS 300N Digital Crane Scale Weighing range (max.) 300 kg | incl. shackle + hook | Accurate ±1% of Mb. | Metal | LCD
PCE-HS 300N
€76.39
€99.91 MSRP
-24%
PCE-BSH 6000 calibratable school scale max. 6 kg|PC software opt.|Counting function g|kg|lb|ct|gn|gsm and much more.
PCE-BSH 6000
€174.24
€229.91 MSRP
-25%
Coating Thickness Gauge PCE-CT 80HP-FN1D5
PCE-CT 80HP-FN1D5
€725.97
€966.89 MSRP
-24%
4-channel thermometer with data logger PCE-T 394
PCE-T 394
€122.69
€161.89 MSRP
-24%
sound level meter PCE-SLT-TRM
PCE-SLT-TRM
€269.71
€355.88 MSRP
-24%
material test bench PCE-FTS50
PCE-FTS50
€439.45
€579.92 MSRP
-23%
current transducer PCE-P17I
PCE-P17I
€53.95
€69.91 MSRP
-25%
Closing Force Measuring Device Original BIA Cl. 1 for Bus and Train Doors
BIA1-SY-10-310
€2,654.92
€3,536.01 MSRP
-24%
PCE-DPG 100 Pressure Gauge Air Pressure & Water Pressure | PEAK function | 2.5? display | Response time <50 ms
PCE-DPG 100
€253.78
€334.92 MSRP
-25%
Kraftmessgerät
PCE-DFG 50K XF
€1,310.13
€1,744.92 MSRP
-24%
Durometer PCE-DX-AS
PCE-DX-AS
€108.28
€142.90 MSRP
-25%
Hydraulic lifting table - industrial scale PCE-HLTS 500
PCE-HLTS 500
€3,266.01
€4,349.91 MSRP
-25%
PCE-432-SC 09 Portable professional sound calibrator class 1 incl. sound level meter with GPS class 1
PCE-432-SC 09
€2,169.83
€2,889.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-DFG NF 2K force transducer | measuring range 0..2000 N / 200 kg | resolution 2 N | 2.8? TFT graphic display
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The dynamometer with an external load cell is designed for measuring compressive forces at measuring points that are difficult to access. The load cell is connected to the dynamometer by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The dynamometer or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The dynamometer can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the dynamometer until this value is exceeded or deleted. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or fallen short of, a signal is given in the dynamometer display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909948 PCE-DFG NF 2K 4250348719300 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-nf-2k-force-transducer-measuring-range-0-2000-n-200-kg-resolution-2-n-2-8-tft-graphic-display-t-909948-4250348719300?dc=GB&cu=EUR 2026-08-03 848.36 United Kingdom GB DE 14
The dynamometer can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the dynamometer until this value is exceeded or deleted. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or fallen short of, a signal is given in the dynamometer display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909948 PCE-DFG NF 2K 4250348719300 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-nf-2k-force-transducer-measuring-range-0-2000-n-200-kg-resolution-2-n-2-8-tft-graphic-display-t-909948-4250348719300?dc=GB&cu=EUR 2026-08-03 848.36 United Kingdom GB DE 14