zoom_in
zoom_out
fullscreen
PCE-DFG NF 1K Force Gauge | Measuring range 0..1000 N | Resolution 0.1N | Accuracy ±0.5%
Sku: T-909946
Discontinued item
doneMade in Germany
Force gauge PCE-DFG NF 1K with external load cell, USB interface and PC software
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909946
SKU manufacturer:
PCE-DFG NF 1K
GTIN Code (EAN):
4250348719393
Weight:
1,71 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The force gauge with an external load cell is designed for measuring compressive forces at hard-to-reach measuring points. The load cell is connected to the force tester by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed as an instantaneous value, as well as in a graphical measurement curve directly in the force gauge. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted. The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed as an instantaneous value, as well as in a graphical measurement curve directly in the force gauge. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted. The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
thickness gauge PCE-CT 80HP-F5N3
PCE-CT 80HP-F5N3
€750.75
€999.91 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-25%
Drehmoment-Kalibrator
PCE-TCT 100
€4,223.32
€5,624.92 MSRP
-24%
building moisture meter PCE-PMI 4
PCE-PMI 4
€378.82
€499.91 MSRP
-24%
Durometer PCE-DX-AS
PCE-DX-AS
€108.28
€142.90 MSRP
-24%
mold measuring device PCE-PMI 1BT
PCE-PMI 1BT
€89.41
€116.89 MSRP
-25%
Hydraulic lifting table - industrial scale PCE-HLTS 500
PCE-HLTS 500
€3,266.01
€4,349.91 MSRP
-24%
digital thermometer PCE-T 330
PCE-T 330
€187.10
€246.89 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-25%
PCE-EMD 5 hygrometer 0.0..99.9% RH|0...50 °C|connection of up to four external sensors|anal. 4..20mA
PCE-EMD 5
€598.32
€796.89 MSRP
-24%
4-channel thermometer with data logger PCE-T 394
PCE-T 394
€122.69
€161.89 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
PCE-BSH 10000 calibratable industrial scale max. 10 kg | piece counting function | USB | g | kg | lb | ct | gn | gsm and much more.
PCE-BSH 10000
€164.37
€216.89 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-DFG NF 1K Force Gauge | Measuring range 0..1000 N | Resolution 0.1N | Accuracy ±0.5%
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The force gauge with an external load cell is designed for measuring compressive forces at hard-to-reach measuring points. The load cell is connected to the force tester by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed as an instantaneous value, as well as in a graphical measurement curve directly in the force gauge. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted. The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909946 PCE-DFG NF 1K 4250348719393 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-nf-1k-force-gauge-measuring-range-0-1000-n-resolution-0-1n-accuracy-0-5-t-909946-4250348719393?dc=GB&cu=EUR 2026-08-03 848.36 United Kingdom GB DE 14
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed as an instantaneous value, as well as in a graphical measurement curve directly in the force gauge. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted. The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909946 PCE-DFG NF 1K 4250348719393 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-nf-1k-force-gauge-measuring-range-0-1000-n-resolution-0-1n-accuracy-0-5-t-909946-4250348719393?dc=GB&cu=EUR 2026-08-03 848.36 United Kingdom GB DE 14