zoom_in
zoom_out
fullscreen
PCE-DFG N 20K force gauge for tensile and compressive force with very high resolution and external S load cell
Sku: T-909937
Discontinued item
doneMade in Germany
Dynamometer PCE-DFG N 20K
with external S load cell
USB interface
PC software
with external S load cell
USB interface
PC software
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909937
SKU manufacturer:
PCE-DFG N 20K
GTIN Code (EAN):
4250348723581
Weight:
2,70 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The dynamometer measures both tensile and compressive forces with very high resolution. The tensile force or compressive force is often required in test laboratories, e.g. to determine yield strengths or breakaway forces. The dynamometer is supplied with an external measuring cell. The measuring cell is connected to the dynamometer by an approx. 6 m long sensor cable. The dynamometer or load cell has an M20 threaded receptacle to introduce the tensile or compressive forces.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
lifting table scale / industrial scale PCE-HLTS 2T
PCE-HLTS 2T
€3,566.34
€4,749.91 MSRP
-24%
Earth Tester PCE-ET 3000
PCE-ET 3000
€399.29
€526.89 MSRP
-24%
digital thermometer PCE-T 330
PCE-T 330
€187.10
€246.89 MSRP
-25%
Colorimeter PCE-CSM 5
PCE-CSM 5
€1,919.03
€2,555.88 MSRP
-25%
vehicle measuring device PCE-CT 80HP-FN3
PCE-CT 80HP-FN3
€747.02
€994.92 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-23%
current transducer PCE-P17I
PCE-P17I
€53.95
€69.91 MSRP
-25%
1 + 3-phase power analyzer PCE-360 | RS-232 interface | PC cable | software | 512 K data logger
PCE-360
€1,257.56
€1,674.92 MSRP
-25%
torque measuring device PCE-TM 80
PCE-TM 80
€619.37
€824.92 MSRP
-25%
Drehmoment-Kalibrator
PCE-TCT 100
€4,223.32
€5,624.92 MSRP
-24%
building moisture meter PCE-PMI 4
PCE-PMI 4
€378.82
€499.91 MSRP
-24%
Radon Monitor
PCE-RD 75
€143.91
€189.91 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-24%
Borescope PCE-VE 200-S
PCE-VE 200-S
€431.89
€569.91 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-DFG N 20K force gauge for tensile and compressive force with very high resolution and external S load cell
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The dynamometer measures both tensile and compressive forces with very high resolution. The tensile force or compressive force is often required in test laboratories, e.g. to determine yield strengths or breakaway forces. The dynamometer is supplied with an external measuring cell. The measuring cell is connected to the dynamometer by an approx. 6 m long sensor cable. The dynamometer or load cell has an M20 threaded receptacle to introduce the tensile or compressive forces.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine. T-909937 PCE-DFG N 20K 4250348723581 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-n-20k-force-gauge-for-tensile-and-compressive-force-with-very-high-resolution-and-external-s-load-cell-t-909937-4250348723581?dc=GB&cu=EUR 2026-08-03 897.9 United Kingdom GB DE 14
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement.
The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value. When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine. T-909937 PCE-DFG N 20K 4250348723581 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-dfg-n-20k-force-gauge-for-tensile-and-compressive-force-with-very-high-resolution-and-external-s-load-cell-t-909937-4250348723581?dc=GB&cu=EUR 2026-08-03 897.9 United Kingdom GB DE 14