HEWI Room set 111XAH01.130 VA XA BB coloured bit DIN L/R HEWI

Room door fitting in H-technology with rosettes according to DIN 18255 and DIN EN 1906 made of stainless steel, consisting of: Door handle model 111X made of stainless steel round tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with shoulder guide and latching groove, with M5 grub screw as additional fixing of the door handle with the square pin for optimal power transmission into the door leaf. Installation by simply snapping the door handle into the base parts pre-assembled on the door. The latch can be released again using a dismantling key. The lever handle fulfils the requirements of DIN EN 179 and DIN 18040. Surface satin finished Rosette substructure in plastic-steel composite construction with black zinc/nickel surface for optimal corrosion protection, integrated spring-loaded lift-up module, DIN left and DIN right hand useable, to support the lock for a longer lifespan. Fixed swivel bearing of the handle with self-locking all-round locking and 5 mm bearing point as a maintenance-free sliding bearing with elastic compensation area to compensate for possible assembly inaccuracies. Concealed, non-loosening screw connection with M5 stainless steel screw and sleeve screw combination, as well as supporting pins that go into the door leaf. Rosette cover cap, round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Designed and tested for the contract sector, user category according to DIN EN 1906 - class 4. Set with 8 mm square pin. User category: class 4. Durability: class 7. Door dimensions: no classification specified. Fire resistance: class 0. Safety: class 1. Corrosion resistance: class 4. Burglary resistance: class 0. Execution type: A. Article: HEWI 111XAH01.130 Further technical information: · fixing system: concealed screw fittings · cam distance: 38mm