zoom_in
zoom_out
fullscreen
HEUER Short-stroke module for vices 160mm 197109
Sku: T-269400
Discontinued item
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-269399 | Short-stroke module for vices 140mm | 197108 |
donesuitable for 160mm
doneStroke (clamping path) 5mm
doneStroke (clamping path) 5mm
doneHands free for more productivity!
doneHands free for more productivity!
doneHands free for more productivity!
Product data
Manufacturer:
Brockhaus HEUER GmbH
Condition:
NEW
Sku:
T-269400
SKU manufacturer:
197109
GTIN Code (EAN):
4010898197092
Weight:
25,50 Kg
All information relating to products from Brockhaus HEUER GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The quick clamp for series manufacturers and large workpieces
For all those who process identical workpieces in series with small clamping paths or miss the helpful ‘third hand’ for heavy, bulky workpieces. Your hands are free for more productivity!
The HEUER short-stroke module provides a real increase in productivity. Without using the spindle spanner, small clamping distances of up to and large workpieces of 5 mm can be completed simply by using the foot pedal. And this applies to both clamping and unclamping.
The HEUER short-stroke module is designed as an accessory for HEUER vices. It consists of a special spindle, the hydraulic module for the spindle head, a hydraulic hose and a hydraulic foot pump with two pedals - one for clamping with a large lever and a slightly smaller one for releasing. The way it works is as simple as it is ingenious: The HEUER short-stroke module utilises the spring travel of the compression spring in the precision spindle bearing. This is approx. 5 mm. The ‘play’ is used by the hydraulic module on the spindle head to push the front jaw towards the rear jaw without turning the spindle. The HEUER short-stroke module can thus build up a pressure of over 5 tonnes! When the ‘release’ pedal is pressed, the hydraulic pressure is released and the compression spring pushes the jaws apart again. The spindle and vice can still be operated by hand after the upgrade. Thanks to the threaded ends on the spindle spanner, it can be removed if it gets in the way when working on the vice with the short-stroke module. With the HEUER short-stroke module, hands remain free and the time for clamping and unclamping the workpiece can be significantly reduced. Even with bulky or heavy workpieces that require both hands for clamping, the HEUER short-stroke module replaces the ‘third hand’ that would otherwise be required for clamping with the spindle.
The HEUER short-stroke module is available for vice sizes 140 and 160.
For all those who process identical workpieces in series with small clamping paths or miss the helpful ‘third hand’ for heavy, bulky workpieces. Your hands are free for more productivity!
The HEUER short-stroke module provides a real increase in productivity. Without using the spindle spanner, small clamping distances of up to and large workpieces of 5 mm can be completed simply by using the foot pedal. And this applies to both clamping and unclamping.
The HEUER short-stroke module is designed as an accessory for HEUER vices. It consists of a special spindle, the hydraulic module for the spindle head, a hydraulic hose and a hydraulic foot pump with two pedals - one for clamping with a large lever and a slightly smaller one for releasing. The way it works is as simple as it is ingenious: The HEUER short-stroke module utilises the spring travel of the compression spring in the precision spindle bearing. This is approx. 5 mm. The ‘play’ is used by the hydraulic module on the spindle head to push the front jaw towards the rear jaw without turning the spindle. The HEUER short-stroke module can thus build up a pressure of over 5 tonnes! When the ‘release’ pedal is pressed, the hydraulic pressure is released and the compression spring pushes the jaws apart again. The spindle and vice can still be operated by hand after the upgrade. Thanks to the threaded ends on the spindle spanner, it can be removed if it gets in the way when working on the vice with the short-stroke module. With the HEUER short-stroke module, hands remain free and the time for clamping and unclamping the workpiece can be significantly reduced. Even with bulky or heavy workpieces that require both hands for clamping, the HEUER short-stroke module replaces the ‘third hand’ that would otherwise be required for clamping with the spindle.
The HEUER short-stroke module is available for vice sizes 140 and 160.
Additional information
Jaw width:
160mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-19%
Protective jaws Type PP for bench vice size 160mm
108160
€32.86
(€19.55 / Piece)
€40.80 MSRP
-29%
HEUER Compact vise in a case with table clamp and protective jaws
118003
€294.71
€412.82 MSRP
-20%
Protective jaws Type P for bench vice size 160mm
109160
€36.76
(€21.88 / Piece)
€45.71 MSRP
-20%
Rotary table for HEUER bench vice size 120mm
103120
€57.06
€70.88 MSRP
-20%
Table Clamb for HEUER Compact bench vice
119100-Compact
€31.59
€39.24 MSRP
-19%
Protective jaws Type F for bench vice size 180mm
111180
€32.86
(€19.55 / Piece)
€40.80 MSRP
-27%
HEUER bench vice size 120mm
100120
€159.99
€217.90 MSRP
-19%
Protective jaws Type G for bench vice size 180mm
112180
€32.86
(€19.55 / Piece)
€40.80 MSRP
-29%
HEUER Collapsible-Lift size 120mm
106120
€414.71
€580.88 MSRP
-25%
Swivel clamp suitable for HEUER vice 100mm
119103
€68.45
€90.88 MSRP
-20%
Replaceable jaws for HEUER bench vice size 160mm
116160
€39.12
€48.61 MSRP
-19%
Protective jaws Type Fi for bench vice size 120mm
113120
€34.54
(€20.55 / Piece)
€42.90 MSRP
-18%
Protective jaws Type N for bench vice size 100mm
110100
€25.71
(€15.30 / Piece)
€31.22 MSRP
-29%
HEUER-Stand-Lift for HEUER bench vice size 120mm
117120
€225.42
€315.71 MSRP
-25%
Protective jaw-Set for bench vice size 140mm
115106
€94.16
(€14.01 / Piece)
€125.08 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
HEUER Short-stroke module for vices 160mm 197109
Heuer 197 109
Heuer 197109
Heuer short-stroke module 160mm
The quick clamp for series manufacturers and large workpieces
For all those who process identical workpieces in series with small clamping paths or miss the helpful ‘third hand’ for heavy, bulky workpieces. Your hands are free for more productivity!
The HEUER short-stroke module provides a real increase in productivity. Without using the spindle spanner, small clamping distances of up to and large workpieces of 5 mm can be completed simply by using the foot pedal. And this applies to both clamping and unclamping.
The HEUER short-stroke module is designed as an accessory for HEUER vices. It consists of a special spindle, the hydraulic module for the spindle head, a hydraulic hose and a hydraulic foot pump with two pedals - one for clamping with a large lever and a slightly smaller one for releasing. The way it works is as simple as it is ingenious: The HEUER short-stroke module utilises the spring travel of the compression spring in the precision spindle bearing. This is approx. 5 mm. The ‘play’ is used by the hydraulic module on the spindle head to push the front jaw towards the rear jaw without turning the spindle. The HEUER short-stroke module can thus build up a pressure of over 5 tonnes! When the ‘release’ pedal is pressed, the hydraulic pressure is released and the compression spring pushes the jaws apart again. The spindle and vice can still be operated by hand after the upgrade. Thanks to the threaded ends on the spindle spanner, it can be removed if it gets in the way when working on the vice with the short-stroke module. With the HEUER short-stroke module, hands remain free and the time for clamping and unclamping the workpiece can be significantly reduced. Even with bulky or heavy workpieces that require both hands for clamping, the HEUER short-stroke module replaces the ‘third hand’ that would otherwise be required for clamping with the spindle.
The HEUER short-stroke module is available for vice sizes 140 and 160. T-269400 197109 4010898197092 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/heuer-short-stroke-module-for-vices-160mm-197109-t-269400-4010898197092?dc=GB&cu=EUR 2026-07-17 1311.68 United Kingdom GB DE 14
For all those who process identical workpieces in series with small clamping paths or miss the helpful ‘third hand’ for heavy, bulky workpieces. Your hands are free for more productivity!
The HEUER short-stroke module provides a real increase in productivity. Without using the spindle spanner, small clamping distances of up to and large workpieces of 5 mm can be completed simply by using the foot pedal. And this applies to both clamping and unclamping.
The HEUER short-stroke module is designed as an accessory for HEUER vices. It consists of a special spindle, the hydraulic module for the spindle head, a hydraulic hose and a hydraulic foot pump with two pedals - one for clamping with a large lever and a slightly smaller one for releasing. The way it works is as simple as it is ingenious: The HEUER short-stroke module utilises the spring travel of the compression spring in the precision spindle bearing. This is approx. 5 mm. The ‘play’ is used by the hydraulic module on the spindle head to push the front jaw towards the rear jaw without turning the spindle. The HEUER short-stroke module can thus build up a pressure of over 5 tonnes! When the ‘release’ pedal is pressed, the hydraulic pressure is released and the compression spring pushes the jaws apart again. The spindle and vice can still be operated by hand after the upgrade. Thanks to the threaded ends on the spindle spanner, it can be removed if it gets in the way when working on the vice with the short-stroke module. With the HEUER short-stroke module, hands remain free and the time for clamping and unclamping the workpiece can be significantly reduced. Even with bulky or heavy workpieces that require both hands for clamping, the HEUER short-stroke module replaces the ‘third hand’ that would otherwise be required for clamping with the spindle.
The HEUER short-stroke module is available for vice sizes 140 and 160. T-269400 197109 4010898197092 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/heuer-short-stroke-module-for-vices-160mm-197109-t-269400-4010898197092?dc=GB&cu=EUR 2026-07-17 1311.68 United Kingdom GB DE 14