Gedore KLANN MODULO 270 A assembly trolley KL-4999-270 A

With its unique configuration, the ”MODULO 270” assembly trolley offers the ideal mobile workplace for fast, organised and efficient repair work: - Various drive parts such as hydraulic cylinder 17 t KL-0040-2500, ring ratchet/open-end spanner, impact extractor 4.8 kg KL-0049-31 as well as pull/push spindles (mechanical, hydraulic), quick/clamping nuts and adapters from the KL-0039-..series for driving the tool sets, - KL-4007-411 articulated handle and power screwdriver / socket spanner inserts (SK / TX / XZN) for loosening and tightening wheel bearing centre bolts, - KL-0192-5 circlip pliers for removing and fitting wheel bearing circlips, - KL-0041-38... wire brush for removing rust and cleaning various components, - KL-0041-4... wheel hub extractor and KL-0041-4... wheel bearing tool sets for removing and pressing in wheel bearings. series for removing and pressing in wheel hubs/bearing units, e.g. for VW, Audi, Seat, Skoda and Ford, Mazda, Volvo, - KL-0174-.. pullers. series for removing conventional wheel hubs and for pressing out glued and stuck drive shafts, - KL-0049-360 A hooks for removing control arms from the suspension joint clamping bore, - KL-0039-.. wheel bearing tool sets for removing and pressing in wheel bearings, - KL-0039-.. series for pressing out and pressing in almost all conventional wheel bearings and wheel hubs, - Silent bearing tool sets from the KL-0039-.. series for pressing out and pressing in silentbloc and spherical plain bearings, - Pressing devices of the KL-0326-1. Series for pressing out and pressing in support/guide joints, e.g. for Mercedes and VW T4, - Pressing devices of the KL-0610-1. series for pressing out and pressing in silentblocs on the rear axle trailing arm, e.g. on Ford, Mazda, Volvo, - KL-2211-111. wheel bearing tool for removing tightly bolted wheel bearing units, e.g. on Subaru, - KL-0115 holding device for counter-holding wheel hubs when loosening and tightening the wheel bearing centre bolt, - KL-0042-9. puller. series for pulling off stuck wheel bearing inner rings on the wheel hub, - KL-0121-96... clamping pliers for pressing together ear clamps and locking stepless clamps, - KL-0165-... bead breaker series for forcing ball joint connections on steering and axle systems, - KL-0167-30 A eccentric spanner for loosening and tightening internal track rod and axial joints, - KL-0190-12 forcing fork for testing bearing and joint connections on vehicle axles and for forcing various parts, - Tool for remoulding stud bolt threads (wheel hub) and retracting drive shafts, Technical data Assembly trolley: - Dimensions H 985 x W 1200 x D 635 mm, - Beech multiplex worktop, 30 mm thick, oiled, - Total load capacity: 1000 kg / In mobile operation: 750 kg, - 2x fixed castors ø 200 mm and 2x swivel castors ø 125 mm with total brakes, - Sheet steel, corrosion-resistant, scratch-resistant powder-coated in GEDORE blue, - Extra wide drawers W 998 x D 474 mm with full extension, can hold up to 70 kg, - Automatic drawer pull-in with individual pull-out stop and central locking, - Side panels with Euro perforations 10 x 38 mm for attaching hooks and tools