.png "Header image")
zoom_in
zoom_out
fullscreen
Gedore KLANN Assembly trolley ”MODULO 810 A” KL-4999-810 A
Sku: T-438970
Discontinued item
doneMade in Germany
Product data
Manufacturer:
KLANN - GEDORE Automotive GmbH
Condition:
NEW
Sku:
T-438970
SKU manufacturer:
KL-4999-810 A
GTIN Code (EAN):
4046459168812
Weight:
0,00 Kg
All information relating to products from KLANN - GEDORE Automotive GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
With its unique configuration, the robust ”MODULO 810 A” assembly trolley offers the ideal mobile workstation for fast, organised and efficient engine, brake and chassis repair work on commercial vehicles, e.g. when loosening wheel bolts, wheel capsules, brake calliper fastening bolts, studs or locknuts as well as for pressing off ball joints, pressing out and pressing in silentblocs and turning engines, etc. With its 4 extra-wide drawers and large, 30 mm thick beech multiplex worktop, it offers an ideal work surface. The side push handle and the two 125 mm smooth-running ball-bearing wheels with total brakes allow the trolley to be moved easily and smoothly. The automatic retraction of the 4 drawers and the central locking system prevent unintentional opening of the drawers. The drawers have a full-extension runner, can each bear a load of 70 kg and have an individual pull-out stop so that only one drawer can be opened at a time. This prevents the trolley from falling over when the drawers are open. Body - dimensions: H 985 x W 1200 x D 635 mm- 30 mm thick multiplex beech plywood panel, surface additionally protected by linseed oil varnish- Worktop offset to the rear enables flush parking against the wall- One drawer block in the width of the trolley- Manoeuvrable and easy to steer thanks to the driving/steering handle- Side panels with Euro holes 10 x 38 mm for attaching hooks and tools- Sheet steel, Corrosion-resistant and scratch-resistant powder-coated, GEDORE blue - Drawers - Version with 4 drawers- Central locking with cylinder lock- Wide drawers (W 998 x D 474 mm) with full-extension runners, removable- Single pull-out stop prevents more than one drawer from opening, single-handed operation- Ball-bearing guide rails with self-closing mechanism- Load capacity per drawer 70 kg- Sheet steel, corrosion-resistant and scratch-resistant powder-coated, GEDORE blue - GEDORE high-performance chassis - Total load capacity 1000 kg in mobile operation 750 kg- 2 GEDORE high-performance wheels with roller bearings (fixed castors Ø 200 mm)- 2 GEDORE smooth-running wheels with ball bearings (swivel castors Ø 125 mm), both with total brakes- GEDORE trapezoidal axle design ensures smooth running, manoeuvrability and tracking even under maximum load: Smooth running, manoeuvrability and directional stability - Drive parts required: KL-0215-35 M25 - Hydraulic pump
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-9%
Special SK impact socket wrench set, 3 pcs.
KL-0100-80 K
€47.52
Socket wrench SW 33, 400 mm, 3/4”
KL-0100-633
€18.28
Locking pin Ø 7 mm
KL-0280-6102
€20.67
Plastic case
KL-4990-1118
€10.63
-3%
Door handle removal tool
KL-0273-11
€42.39
-15%
Guide tube Ø66.5 thread M56x1.5
KL-1020-3913
€119.03
-12%
Locking tool set 1.4 + 1.6 16V (BMW/PSA)
KL-0580-83 KA
€437.98
-18%
Tension / pressure plate with bridge bearing Ø 96 mm Mercedes Sprinter / VW Crafter
KL-0041-502
€622.44
€758.99 MSRP
-8%
Bolt set Ø 18 mm
KL-0282-311
€32.82
-9%
Extension tube with protective handle
KL-0184-0101 A
€49.33
-15%
Twist drill Ø9.5x175x250 with clamping surfaces
KL-0250-4322
€80.63
-17%
Hubcap and axle nut wrench SW 120
KL-1022-120 A
€136.26
€164.70 MSRP
-22%
Hydraulic hand pump
KL-0215-35 M25
€287.18
€368.99 MSRP
-11%
Conversion kit for lower boom
KL-5501-192
€224.41
-8%
Mirror with telescope Ø 50 mm, 300 mm long
KL-0126-261
€22.65
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Gedore KLANN Assembly trolley ”MODULO 810 A” KL-4999-810 A
KL-4999-810-A
KL 4999 810 A
KL4999810A
Klann
Klann Gedore
Gedore Automotive
special tools
KLANN - GEDORE Automotive GmbH
Gedore Automotive
Gedore Automotive 4046459168812
Gedore Automotive KL-4999-810 A
4046459168812
KL-4999-810 A
”MODULO 810 A” assembly trolley
With its unique configuration, the robust ”MODULO 810 A” assembly trolley offers the ideal mobile workstation for fast, organised and efficient engine, brake and chassis repair work on commercial vehicles, e.g. when loosening wheel bolts, wheel capsules, brake calliper fastening bolts, studs or locknuts as well as for pressing off ball joints, pressing out and pressing in silentblocs and turning engines, etc. With its 4 extra-wide drawers and large, 30 mm thick beech multiplex worktop, it offers an ideal work surface. The side push handle and the two 125 mm smooth-running ball-bearing wheels with total brakes allow the trolley to be moved easily and smoothly. The automatic retraction of the 4 drawers and the central locking system prevent unintentional opening of the drawers. The drawers have a full-extension runner, can each bear a load of 70 kg and have an individual pull-out stop so that only one drawer can be opened at a time. This prevents the trolley from falling over when the drawers are open. Body - dimensions: H 985 x W 1200 x D 635 mm- 30 mm thick multiplex beech plywood panel, surface additionally protected by linseed oil varnish- Worktop offset to the rear enables flush parking against the wall- One drawer block in the width of the trolley- Manoeuvrable and easy to steer thanks to the driving/steering handle- Side panels with Euro holes 10 x 38 mm for attaching hooks and tools- Sheet steel, Corrosion-resistant and scratch-resistant powder-coated, GEDORE blue - Drawers - Version with 4 drawers- Central locking with cylinder lock- Wide drawers (W 998 x D 474 mm) with full-extension runners, removable- Single pull-out stop prevents more than one drawer from opening, single-handed operation- Ball-bearing guide rails with self-closing mechanism- Load capacity per drawer 70 kg- Sheet steel, corrosion-resistant and scratch-resistant powder-coated, GEDORE blue - GEDORE high-performance chassis - Total load capacity 1000 kg in mobile operation 750 kg- 2 GEDORE high-performance wheels with roller bearings (fixed castors Ø 200 mm)- 2 GEDORE smooth-running wheels with ball bearings (swivel castors Ø 125 mm), both with total brakes- GEDORE trapezoidal axle design ensures smooth running, manoeuvrability and tracking even under maximum load: Smooth running, manoeuvrability and directional stability - Drive parts required: KL-0215-35 M25 - Hydraulic pump
T-438970
KL-4999-810 A
4046459168812
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/gedore-klann-assembly-trolley-modulo-810-a-kl-4999-810-a-t-438970-4046459168812?dc=GB&cu=EUR
2026-08-03
11990.25
United Kingdom
GB
DE
14