Gedore KLANN Assembly trolley MODULO 260 KL-4999-260

With its unique configuration, the ”MODULO 260” assembly trolley offers the ideal mobile workstation for fast, organised and efficient repair work. Contents / area of application: - Various drive parts such as hydraulic cylinder 17 t KL-0040-2500, ring ratchet/open-end spanner, impact extractor 4.8 kg KL-0049-31 as well as pull/push spindles (mechanical, hydraulic), quick/clamping nuts and adapters from the KL-0039-..series for driving the tool sets. - Articulated handle KL-4007-411 as well as power spanner / socket spanner inserts (SK / TX / XZN) for loosening and tightening wheel bearing centre bolts. - Circlip pliers KL-0192-5 for removing and fitting wheel bearing circlips. - Wire brush for derusting and cleaning various components. - Wheel hub extractor KL-0041-38... and wheel bearing tool sets from the KL-0041-4... series. series for removing and pressing in wheel hub/bearing units, e.g. for VW, Audi, Seat, Skoda and Ford, Mazda, Volvo. - Puller of the KL-0174-.. series for extracting conventional wheel hubs and for pressing out glued and stuck drive shafts. - Hook for impact extractor KL-0049-360 A for extracting control arms from the suspension joint clamping bore. - Wheel bearing tool sets from the KL-0039-.. series for pressing out and pressing in almost all conventional wheel bearings and wheel hubs. - Silent bearing tool sets from the KL-0039-.. series for pressing out and pressing in silentbloc and spherical plain bearings. - Pressing devices from the KL-0326-1.. series for pressing out and pressing in support/guide joints, e.g. for Mercedes and VW T4. - Pressing devices of the KL-0610-1. Series for pressing out and pressing in silentblocs on the rear axle trailing arm, e.g. on Ford, Mazda, Volvo. - Wheel bearing tool KL-2211-111... for removing tightly bolted wheel bearing units, e.g. on Subaru. Technical data Assembly trolley: - Dimensions H 985 x W 1200 x D 635 mm, - Beech multiplex worktop, 30 mm thick, oiled, - Total load capacity: 1000 kg / In mobile operation: 750 kg, - 2x fixed castors ø 200 mm and 2x swivel castors ø 125 mm with total brakes, - Sheet steel, corrosion-resistant, scratch-resistant powder-coated in GEDORE blue, - Extra wide drawers W 998 x D 474 mm with full extension, load capacity up to 70 kg, - Automatic drawer pull-in with individual pull-out stop and central locking, - Side panels with Euro perforations 10 x 38 mm for attaching hooks and tools

Universally applicable for repair work on wheel bearings, steering and axle systems of cars and vans.