G-EMR XEA 140degrees for TS 98 XEA/TS 92 XEA silver P600 e-mech.DORMAKABA 57070001

with lever - for TS 98 XEA or TS 92 XEA - in XEA design - enables precise hold-open of fire and smoke protection doors - can be monitored and controlled completely independently of other systems - the hold-open point can be set to an opening angle between approx. 80° and 140° - Note: Set door stopper - in the event of an alarm or power failure, the hold-open is cancelled and the door is closed by the door closer - the hold-open can also be easily released manually thanks to the adjustable release force (no tools required) - incl. Lever slide channel, slide piece, electromechanical hold-open unit, smoke detector, power supply unit, panelling, fixing screws and end caps - Can be used for both DIN-L and DIN-R doors - The device has two separate LEDs to indicate operation and maintenance Supply voltage 230 V AC Operating voltage 24 V DC max. Rated output cable 9.8 W Power consumption EMF 1.4 Duty cycle 100% ED Connection options for additional detectors and external manual release as well as a potential-free alarm contact are also available - For particularly large and heavy doors (over 1250 mm) or doors where the hold-open point should be over 140°, we recommend using EM holding magnets in conjunction with the RMZ XEA smoke detection control panel instead of the G-EMR XEA Other technical features: - Max. door width: 1400 mm Door width: 1400mm Supplied without door closer - Please order separately