zoom_in
zoom_out
fullscreen
Eurotec T-Stick 111857
Sku: T-363966
€74.87 (excl. legal VAT, excl. Shipping)
(€0.60 / Piece)
In stock,ready for shipping
Carton
done5 mm
doneT-Stick, stainless steel A2
T-Stick - 111857
Content:
1 Carton = 125 Piece (€0.60 / Piece)
Shipping:
€41.93 Versandservice to United Kingdom
plus €8.00 stock transfer surcharge
For orders under €100.84 order total plus €44.54 Surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln This offer is intended exclusively for companies, public institutions,tradespeople and freelancers.
Payment methods:
Returns:
Security:
Product data
Manufacturer:
E.u.r.o.Tec GmbH
Condition:
NEW
Sku:
T-363966
SKU manufacturer:
111857
GTIN Code (EAN):
4251314719492
Weight:
0,02 Kg
All information relating to products from E.u.r.o.Tec GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
For indirect fastening of decking boards
The T-Stick is fastened between two wooden boards and the clamping plate is inserted into the board groove. The result is a visually appealing wooden surface without visible screw heads. The T-Stick ensures an even joint spacing. A gap of approx. 9 mm to the substructure prevents waterlogging. The distance ensures good ventilation, a measure to extend the service life of the decking.
If the Eurotec installation specifications are adhered to, the T-Stick allows the boards to be adjusted slightly before final screwing. Screwing the boards into place fixes them permanently. Subsequent replacement of decking boards is also possible after completion.
Fast installation
The T-Stick can be used immediately. If the start and end boards are also to be fastened indirectly, we recommend using the Eurotec StarterClip (art. no. 975591). Pre-drilling is not necessary. The starting plank is fixed first, then the next planks are placed, aligned and fixed. To begin with, the T-stick with the board is inserted into the side groove and the screw is screwed in lightly to fix it in place. Once the planks are fixed in place, the screws can be finally tightened.
Make sure that the torque of your cordless screwdriver is set correctly so that the screws are not overtightened under any circumstances.
For details on the groove geometry, please refer to the product data sheet, which is available for you in the download area. If you have any further questions, please contact our technical department.
*Note: The stainless steel plate is also available in A4 on request.
**The drilling screws are included in the scope of delivery. These are suitable for timber and aluminium substructures (up to max. 3 mm wall thickness).
The T-Stick is fastened between two wooden boards and the clamping plate is inserted into the board groove. The result is a visually appealing wooden surface without visible screw heads. The T-Stick ensures an even joint spacing. A gap of approx. 9 mm to the substructure prevents waterlogging. The distance ensures good ventilation, a measure to extend the service life of the decking.
If the Eurotec installation specifications are adhered to, the T-Stick allows the boards to be adjusted slightly before final screwing. Screwing the boards into place fixes them permanently. Subsequent replacement of decking boards is also possible after completion.
Fast installation
The T-Stick can be used immediately. If the start and end boards are also to be fastened indirectly, we recommend using the Eurotec StarterClip (art. no. 975591). Pre-drilling is not necessary. The starting plank is fixed first, then the next planks are placed, aligned and fixed. To begin with, the T-stick with the board is inserted into the side groove and the screw is screwed in lightly to fix it in place. Once the planks are fixed in place, the screws can be finally tightened.
Make sure that the torque of your cordless screwdriver is set correctly so that the screws are not overtightened under any circumstances.
For details on the groove geometry, please refer to the product data sheet, which is available for you in the download area. If you have any further questions, please contact our technical department.
*Note: The stainless steel plate is also available in A4 on request.
**The drilling screws are included in the scope of delivery. These are suitable for timber and aluminium substructures (up to max. 3 mm wall thickness).
Additional information
Colour:
schwarz
Material:
Hartkunststoff / PP-C
Distance floor-substructure (mm):
9mm
Alternative clamping plate:
Edelstahl A4
Wide clamping plate:
20.5mm
Width system clips (mm):
30mm
Height system holder (mm):
24mm
Length Jaw Plate:
30mm
Length system clip (mm):
104mm
Material Clamp plate:
Edelstahl A2
Material Screw:
Edelstahl gehärtet
Thread width min. (mm):
2.5mm
Nut geometry:
Gerade
Thread depth min. (mm):
7.5mm
Thread strength max. (mm):
12.5mm
Thread pitch min. (mm):
5.5mm
Screw measurements (mm):
4,2 x 43mm
Clamping plate strength:
2mm
Pallet quantity:
12000
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
Adjustable foot PRO XXS - height adjustment: 1.0 - 1.5 cm - including L/stone adapter
954020
€103.91
(€2.47 / Piece)
Commercial customer offer**
Anchor rod - galvanised steel - 8 x 110 mm
200111
€4.66
(€0.56 / Piece)
Commercial customer offer**
Facade screw decorative head; stainless steel hardened; TX25
905578
€18.28
(€0.11 / Piece)
Commercial customer offer**
Hapatec - stainless steel, hardened - TX20 - 4.5 x 80 mm
111816
€11.55
(€0.07 / Piece)
Commercial customer offer**
Drywall screw with coarse thread magazine - black phosphated - PH2 - 3.9 x 25 mm
903929
€17.27
(€0.02 / Piece)
Commercial customer offer**
Aluminum concrete angle
975661
€22.44
(€2.67 / Piece)
Commercial customer offer**
Cutter knife - with 8 snap-off blades
800387
€5.92
Commercial customer offer**
Rolfi, self-adhesive cork pad
100350
€16.64
(€0.79 / Piece)
Commercial customer offer**
Bit holder 66 mm
500011
€9.03
Commercial customer offer**
Ridge end plate black - 50 x 120 mm
954211
€25.88
(€1.23 / Piece)
Commercial customer offer**
Adjustment block black - 80 x 50 x 20 (L x W x H)
964560
€232.10
(€1.10 / Piece)
Commercial customer offer**
PediX Duo 190+80
904680
€162.90
(€48.46 / Piece)
Commercial customer offer**
Paneltwistec 1000 washer head - steel special coating 1000 - TX40 - 8.0 x 240 mm
r903071
€37.56
(€0.89 / Piece)
Commercial customer offer**
Tenax spacer - without hold-down
945968
€88.03
(€0.35 / Piece)
Commercial customer offer**
Mounting connector including 3 screws - 175 x 29.7 x 32.7 mm
800272
€187.35
(€4.46 / Piece)
Commercial customer offer**
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Eurotec T-Stick 111857
4251314719492
111857
Eurotec - E.u.r.o.Tec GmbH
EUROTEC
Eurotec GmbH
T-Stick
T-Stick 4251314719492
Terrassen- und Gartenbau
For indirect fastening of decking boards
The T-Stick is fastened between two wooden boards and the clamping plate is inserted into the board groove. The result is a visually appealing wooden surface without visible screw heads. The T-Stick ensures an even joint spacing. A gap of approx. 9 mm to the substructure prevents waterlogging. The distance ensures good ventilation, a measure to extend the service life of the decking.
If the Eurotec installation specifications are adhered to, the T-Stick allows the boards to be adjusted slightly before final screwing. Screwing the boards into place fixes them permanently. Subsequent replacement of decking boards is also possible after completion.
Fast installation
The T-Stick can be used immediately. If the start and end boards are also to be fastened indirectly, we recommend using the Eurotec StarterClip (art. no. 975591). Pre-drilling is not necessary. The starting plank is fixed first, then the next planks are placed, aligned and fixed. To begin with, the T-stick with the board is inserted into the side groove and the screw is screwed in lightly to fix it in place. Once the planks are fixed in place, the screws can be finally tightened.
Make sure that the torque of your cordless screwdriver is set correctly so that the screws are not overtightened under any circumstances.
For details on the groove geometry, please refer to the product data sheet, which is available for you in the download area. If you have any further questions, please contact our technical department.
*Note: The stainless steel plate is also available in A4 on request.
**The drilling screws are included in the scope of delivery. These are suitable for timber and aluminium substructures (up to max. 3 mm wall thickness). T-363966 111857 4251314719492 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/eurotec-t-stick-111857-t-363966-4251314719492?dc=GB&cu=EUR 2026-06-26 74.87 United Kingdom GB DE 14
The T-Stick is fastened between two wooden boards and the clamping plate is inserted into the board groove. The result is a visually appealing wooden surface without visible screw heads. The T-Stick ensures an even joint spacing. A gap of approx. 9 mm to the substructure prevents waterlogging. The distance ensures good ventilation, a measure to extend the service life of the decking.
If the Eurotec installation specifications are adhered to, the T-Stick allows the boards to be adjusted slightly before final screwing. Screwing the boards into place fixes them permanently. Subsequent replacement of decking boards is also possible after completion.
Fast installation
The T-Stick can be used immediately. If the start and end boards are also to be fastened indirectly, we recommend using the Eurotec StarterClip (art. no. 975591). Pre-drilling is not necessary. The starting plank is fixed first, then the next planks are placed, aligned and fixed. To begin with, the T-stick with the board is inserted into the side groove and the screw is screwed in lightly to fix it in place. Once the planks are fixed in place, the screws can be finally tightened.
Make sure that the torque of your cordless screwdriver is set correctly so that the screws are not overtightened under any circumstances.
For details on the groove geometry, please refer to the product data sheet, which is available for you in the download area. If you have any further questions, please contact our technical department.
*Note: The stainless steel plate is also available in A4 on request.
**The drilling screws are included in the scope of delivery. These are suitable for timber and aluminium substructures (up to max. 3 mm wall thickness). T-363966 111857 4251314719492 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/eurotec-t-stick-111857-t-363966-4251314719492?dc=GB&cu=EUR 2026-06-26 74.87 United Kingdom GB DE 14