zoom_in
zoom_out
fullscreen
Eurotec Lifting anchor - load 1.3 tons 110361
Sku: T-363788
€158.99 (excl. legal VAT, excl. Shipping)
(€79.50 / Piece)
In stock,ready for shipping within 48h
Carton
doneTraglast 1.3 to
doneTransport anchor
Lifting anchor - load 1.3 tons - 110361
Content:
1 Carton = 2 Piece (€79.50 / Piece)
Shipping:
€41.93 Versandservice to United Kingdom
plus €8.00 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln This offer is intended exclusively for companies, public institutions,tradespeople and freelancers.
Payment methods:
Returns:
Security:
Product data
Manufacturer:
E.u.r.o.Tec GmbH
Condition:
NEW
Sku:
T-363788
SKU manufacturer:
110361
GTIN Code (EAN):
4251314700421
Weight:
1,01 Kg
All information relating to products from E.u.r.o.Tec GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Transport anchors made of quality steel
The safe system for lifting loadsThe screw made of quality steel serves as a load support and helps to safely lift wooden components of all kinds. The corresponding Eurotec transport anchors of the load group up to 1.3 tonnes are only to be used in combination with the Eurotec transport anchor screws ø 11 x 125 mm and ø 11 x 160 mm. The screws are only suitable for single use. No pre-drilling is necessary for the following applications: Solid wood (softwood), laminated veneer lumber, glulam, plywood, stacked boards and laminated beams. The screw is not suitable for use in hardwood. Please refer to the operating instructions for the possible or permissible installation options. We will be happy to provide you with the operating instructions.
Please note:
- The screws for our transport anchor may only be used once.
- Screws are screwed in without pre-drilling
- The operating instructions must be read before use.
- The user must be trained before first use
- Check the transport anchor for damage before each use.
- The component must not exceed the permissible load.
- At least 2 anchor points must be set for each component.
- How the system works:
- Screw the screw into the component without pre-drilling
- Couple the transport anchor
- Lift the load and bring it into the desired position
- Loosen the anchor and screws
- *The screws are not included in the scope of delivery.
Additional information
Width (mm):
70mm
Length (mm):
190mm
Material:
Qualitätsstahl
Accessories:
110359|110360
Last group:
0,7 - 1,3t
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
Concrete frame screw countersunk head - steel galvanised - head-Ø 11 - TX30 - 7.5 x 342 mm
b944641
€80.71
(€0.96 / Piece)
Commercial customer offer**
EiSYS-2 facade screws - 7.2 x 298 mm
945929
€126.13
(€3.00 / Piece)
Commercial customer offer**
TCC-II 7,3, 7,3 x 210 mm
981844
€254.66
(€1.52 / Piece)
Commercial customer offer**
SawTec cylinder head - steel blue galvanised - TX25 - 5.0x80/48
954120
€10.58
(€0.06 / Piece)
Commercial customer offer**
Perforated panel 40 x 160 x 1.5 mm
904080
€68.48
(€0.81 / Piece)
Commercial customer offer**
Paneltwistec washer head - steel yellow galvanised - TX40 - 8,0 x 320 mm
g903476
€30.59
(€0.73 / Piece)
Commercial customer offer**
Colour facade screw - stainless steel A2 - TX20 - white RAL 9010 - 4.8 x 60 mm
w904675
€46.47
(€0.22 / Piece)
Commercial customer offer**
Profile drilling screw - stainless steel A4 - TX25 - 5.5 x 51 mm
905564
€42.73
(€0.25 / Piece)
Commercial customer offer**
Paneltwistec AG Tellerkopf; Stahl blau verzinkt; TX25, 5,0 x 160 mm
946052
€24.54
(€0.15 / Piece)
Commercial customer offer**
180° joint EVO - 180° Din 6791 rivet A2
975624
€43.78
(€13.03 / Piece)
Commercial customer offer**
Rock hexagonal - steel galvanised - SW17 - 12,5 x 120 mm
110328
€95.50
(€1.14 / Piece)
Commercial customer offer**
Dowel pin S235 - 20 x 178 mm
800234
€51.76
(€2.46 / Piece)
Commercial customer offer**
Drill hole cleaning brush Ø12 mm
200098
€38.32
(€4.56 / Piece)
Commercial customer offer**
Magnus M 70 x 120 mm, in set of 20 = 10 connectors - in set of 10 connectors, screws included
944878
€345.84
(€41.16 / Piece)
Commercial customer offer**
Paneltwistec DAG flat head - TX40 - 8.0 x 100 mm
944589
€8.03
(€0.19 / Piece)
Commercial customer offer**
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Eurotec Lifting anchor - load 1.3 tons 110361
4251314700421
110361
Eurotec - E.u.r.o.Tec GmbH
EUROTEC
Eurotec GmbH
Lifting anchor - load 1.3 tons
Lifting anchor - load 1.3 tons 4251314700421
Werkzeuge und Zubehör Holzbau
The screw made of quality steel serves as a load support and helps to safely lift wooden components of all kinds. The corresponding Eurotec transport anchors of the load group up to 1.3 tonnes are only to be used in combination with the Eurotec transport anchor screws ø 11 x 125 mm and ø 11 x 160 mm. The screws are only suitable for single use. No pre-drilling is necessary for the following applications: Solid wood (softwood), laminated veneer lumber, glulam, plywood, stacked boards and laminated beams. The screw is not suitable for use in hardwood. Please refer to the operating instructions for the possible or permissible installation options. We will be happy to provide you with the operating instructions.
Please note:
Transport anchors made of quality steel
The safe system for lifting loadsThe screw made of quality steel serves as a load support and helps to safely lift wooden components of all kinds. The corresponding Eurotec transport anchors of the load group up to 1.3 tonnes are only to be used in combination with the Eurotec transport anchor screws ø 11 x 125 mm and ø 11 x 160 mm. The screws are only suitable for single use. No pre-drilling is necessary for the following applications: Solid wood (softwood), laminated veneer lumber, glulam, plywood, stacked boards and laminated beams. The screw is not suitable for use in hardwood. Please refer to the operating instructions for the possible or permissible installation options. We will be happy to provide you with the operating instructions.
Please note:
- The screws for our transport anchor may only be used once.
- Screws are screwed in without pre-drilling
- The operating instructions must be read before use.
- The user must be trained before first use
- Check the transport anchor for damage before each use.
- The component must not exceed the permissible load.
- At least 2 anchor points must be set for each component.
- How the system works:
- Screw the screw into the component without pre-drilling
- Couple the transport anchor
- Lift the load and bring it into the desired position
- Loosen the anchor and screws
- *The screws are not included in the scope of delivery.