zoom_in
zoom_out
fullscreen
Eurotec KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm 944805
Sku: T-364866
€134.70 (excl. legal VAT, excl. Shipping)
(€2.69 / Piece)
In stock,ready for shipping
Carton
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-364708 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm | 904808 | |
|
T-364709 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 100 mm | 904809 | |
|
T-364710 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 120 mm | 904810 | |
|
T-364711 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 140 mm | 904811 | |
|
T-364712 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 160 mm | 904812 | |
|
T-364713 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 195 mm | 904813 | |
|
T-364714 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 300 mm | 904815 | |
|
T-364715 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 330 mm | 904816 | |
|
T-364716 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 360 mm | 904817 | |
|
T-364717 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 400 mm | 904818 | |
|
T-364718 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 450 mm | 904819 | |
|
T-364719 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 500 mm | 904820 | |
|
T-364720 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 550 mm | 904821 | |
|
T-364721 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 600 mm | 904822 | |
|
T-364722 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 155 mm | 904825 | |
|
T-364723 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 195 mm | 904826 | |
|
T-364724 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 220 mm | 904827 | |
|
T-364725 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 245 mm | 904828 | |
|
T-364726 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 295 mm | 904829 | |
|
T-364727 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 330 mm | 904830 | |
|
T-364728 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 375 mm | 904831 | |
|
T-364729 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 400 mm | 904832 | |
|
T-364730 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8,0 x 270 mm | 904834 | |
|
T-364865 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 430 mm | 944804 | |
|
T-868829 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100063 | |
|
T-868830 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100064 | |
|
T-868831 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100065 | |
|
T-868832 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100066 | |
|
T-868833 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100080 | |
|
T-868834 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100081 | |
|
T-868835 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100082 | |
|
T-868836 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100083 | |
|
T-869209 | KonstruX rBS; cylinder head; blue galvanized; TX40 | 944806 | |
|
T-869210 | KonstruX rBS; cylinder head; blue galvanized; TX40 | 944807 | |
|
T-1482769 | KonstruX Cylinder head; stainless steel A4; TX30 | 944780 | |
|
T-1482770 | KonstruX Cylinder head; stainless steel A4; TX30 | 944781 | |
|
T-1482771 | KonstruX Cylinder head; stainless steel A4; TX30 | 944782 | |
|
T-1482772 | KonstruX cylinder head; stainless steel A4; TX40 | 944783 | |
|
T-1482773 | KonstruX cylinder head; stainless steel A4; TX40 | 944784 | |
|
T-1482774 | KonstruX cylinder head; stainless steel A4; TX40 | 944785 | |
|
T-1482775 | KonstruX cylinder head; stainless steel A4; TX40 | 944786 | |
|
T-1482776 | KonstruX cylinder head; stainless steel A4; TX40 | 944787 | |
|
T-1482777 | KonstruX cylinder head; stainless steel A4; TX40 | 944788 | |
|
T-1482778 | KonstruX cylinder head; stainless steel A4; TX40 | 944789 | |
|
T-1482779 | KonstruX cylinder head; stainless steel A4; TX40 | 944790 | |
|
T-1482780 | KonstruX cylinder head; stainless steel A4; TX40 | 944791 |
done8.0 x 480 mm
doneKonstruX ST cylinder head 8mm x 480mm blue galvanized
KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm - 944805
Content:
1 Carton = 50 Piece (€2.69 / Piece)
Shipping:
€41.93 Versandservice to United Kingdom
plus €8.00 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln This offer is intended exclusively for companies, public institutions,tradespeople and freelancers.
Payment methods:
Returns:
Security:
Product data
Manufacturer:
E.u.r.o.Tec GmbH
Condition:
NEW
Sku:
T-364866
SKU manufacturer:
944805
GTIN Code (EAN):
4251314705372
Weight:
0,09 Kg
All information relating to products from E.u.r.o.Tec GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is necessary according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.
Additional information
Drive:
TX
Diameter (mm):
8mm
Overall length (mm):
480mm
Thread length (mm):
462mm
Head diameter (mm):
10mm
Head shape:
Zylinderkopf
Material:
1.5523
Surface:
blau passiviert
Accessories:
499992|499998|945856|945979|954109
Drive (TX):
40TX
Bore diameter (mm):
8mm
Thread arrangement:
Vollgewinde
Surface colour:
Blau
Shank milling grooves:
Nein
Layer thickness surface roughness (µ):
5µ
Cutting notch:
Nein
Tip geometry:
Type BS
Tip type:
ST Spitze
lower head angle (degrees):
90Grad
Subhead milling ribs:
Nein
Zulassung:
ETA-11/0024
Pallet quantity:
5600
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 125 mm
904770
€14.58
(€0.69 / Piece)
Commercial customer offer**
Pedix post support 190 + 100 mm - 190 + 100 mm HV+
904682-HV
€158.99
(€47.30 / Piece)
Commercial customer offer**
Chipboard screw Panhead - steel blue galvanised - TX20 - 4,0 x 16 mm
900033
€6.89
(€0.02 / Piece)
Commercial customer offer**
Paneltwistec countersunk magazined - steel blue galvanised - TX25 - 5,0 x 60 mm
905636
€8.24
(€0.08 / Piece)
Commercial customer offer**
EcoTec chipboard screw; stainless steel A2; TG; TX20
903839
€16.93
(€0.04 / Piece)
Commercial customer offer**
Hobotec countersunk screw - steel blue galvanised - TX25 - 5,0 x 60 mm
111509
€10.71
(€0.06 / Piece)
Commercial customer offer**
Bit set 50 mm stainless steel - TX 25 - blue
500058
€51.76
(€3.08 / Piece)
Commercial customer offer**
Paneltwistec countersunk head, steel yellow galvanised - TX20 - 4.5 x 45 mm
903087
€8.95
(€0.02 / Piece)
Commercial customer offer**
Eco Duo blue; Senkkopf verzinkt, 3,5 x 50 mm
905673
€5.92
(€0.01 / Piece)
Commercial customer offer**
Wedge anchor ECB-FZ-C3 10.0 x 115 mm
946234
€29.62
(€0.71 / Piece)
Commercial customer offer**
Paneltwistec 1000 countersunk head - steel special coating 1000 - TX20 - 4.0 x 40 mm
r903004
€21.34
(€0.03 / Piece)
Commercial customer offer**
Anchor rod - galvanised steel - 8 x 110 mm
200111
€4.66
(€0.56 / Piece)
Commercial customer offer**
Concrete frame screw countersunk head - steel galvanised - head-Ø 11 - TX30 - 7.5 x 182 mm
b110067
€15.88
(€0.19 / Piece)
Commercial customer offer**
Paneltwistec AG countersunk head; blue galvanized steel; TX50
100037
€36.72
(€1.75 / Piece)
Commercial customer offer**
Bit set PZ3
100324
€37.35
(€8.89 / Piece)
Commercial customer offer**
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Eurotec KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm 944805
4251314705372
944805
Eurotec - E.u.r.o.Tec GmbH
EUROTEC
Eurotec GmbH
KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm
KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm 4251314705372
Ingenieurholzbau
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is necessary according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.