Eurotec Injection mortar static mixer - 213 mm - M 17 cartridge holder 200084

Content: 300 ml, static mixer included in scope of delivery

Many application options with just one fastener

The Eurotec injection mortar is a high-performance composite mortar based on vinyl ester resin. The mortar offers many application options. Anchoring in masonry and creating subsequently grouted reinforcement connections are no problem. Our injection mortar is approved for use in cracked and non-cracked concrete. Thanks to a very low spreading effect, very close centre and edge distances are also possible. Injection mortar offers a simple solution where conventional fasteners cannot be used, e.g. in perforated bricks. Eurotec injection mortar does not contain any harmful styrene.

Advantages and properties

• Mortar offers many different application options:
  • Suitable for cracked and non-cracked concrete (ETA-17/0191)
  • Creating subsequent reinforcement connections (ETA-17/0192)
  • Diverse masonry anchoring (ETA-17/0193)
• Included in the European Technical Approvals: standard reinforcing steel, threaded rods, washers and nuts.
• Low centre distances and edge distances possible (no expansion pressure)
• Easy to use
• Optimal dosage
• Compatible with standard cartridge guns
• Resealable after use thanks to screw cap
• Suitable for wet anchoring substrates Suitable for wet anchoring substrates
• Suitable for water-filled drill holes in concrete (dowel sizes ø 8 16 mm)
• Contains no harmful styrene
• Temperature application range:
  • -40 °C to +120 °C in concrete
  • -40 °C to +80 °C in masonry and for subsequent reinforcement connections
• Suitable for use in closed rooms (emission class A+ acc. VOC Emissions Test report)
• Fire resistance class F120 (anchor rods M8 M30, tested in non-cracked concrete)
• Approved for contact with drinking water (NSF/ANSI Standard 61)
• The mortar has a shelf life of at least 12 months
• Mortar colour: grey