zoom_in
zoom_out
fullscreen
-14%
ELMAG V-belt drill 16023
Sku: T-496403
920,92 € (excl. legal VAT, excl. Shipping)
Product on backorder,
ready to ship within 14 days
ready to ship within 14 days
Piece
doneSäulenbohrmaschinen
doneModel KBM 32 SN
doneModel KBM 32 SN
V-belt drill Model KBM 32 SN|Super slim professional column drill 1.100 W|This is how professionals drill|With a maximum quill spacing of 700 mm from the drilling bench, the KBM 32 SN allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate increase the clearance for high moulded parts.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
199,92 € Versandservice to United Kingdom
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-496403
SKU manufacturer:
16023
GTIN Code (EAN):
9004853160233
Weight:
150,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Standard equipment:
- quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 4 / B 16
- tool set
- drive-out
wedge - operating instructions / CE
- TB 125 Vario - klein ganz groß, Mit einem maximalen Pinolenabstand zum Bohrtisch von 700 mm ermöglicht die KBM 32 SN die Bearbeitung von hohen Werkstücken und fertig geschweißten Bauteilen. Spannnuten in der Grundplatte
erweitern den Spielraum für hohe Formteile.
Die Maschine ist daher gut für Reparaturen in der Landwirtschaft und
für den Rahmenbau in Metallbaubetrieben geeignet. Sie fällt durch eine grundsolide Ausführung und eine gute Serienausstattung auf. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
32mm
Drilling table area (mm):
475 x 425mm
Drilling table stroke (mm):
520mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
80 - 1.700UpM
Speed stages ():
12
Base plate area (lxb) (mm):
550 x 570mm
Height (total) (mm):
1.710mm
Displacement (mm):
475 x 425 x 700mm
Engine power (W):
1.100W
Mains connection (V/Hz):
400 / 50 - 60V/Hz
Pine pitch table min./max. (mm):
165 - 700mm
Pinole gap (mm):
120mm
Column diameter (mm):
92mm
Spindle reception (rotating spindle) ():
MK 4
Thread pitch (mm):
260mm
T-slots, width (mm):
16mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-19%
Ball bearing (item 26)
9403379
9,24 €
11,39 € MSRP
-25%
Aluminium pressure line incl. nut + cutting ring
9201238
33,82 €
45,00 € MSRP
-13%
Glass measuring rod Mod. KA 500/420
88828
361,72 €
-24%
Needle holder for 19 pcs. 3mm needles
44830
30,88 €
40,50 € MSRP
-8%
BOMAR metal bandsaw
78916
16.816,64 €
GI seal no. 12
9302075
1,92 €
-19%
Ball no. 11
9402841
0,88 €
1,09 € MSRP
-29%
Lock nut no. 14
9106100
12,56 €
17,81 € MSRP
-40%
HSS Co5 shell end mill DIN 1880
74202
175,67 €
292,98 € MSRP
-10%
Angle stop 0-180°
9601337
37,98 €
-27%
Cylinder head gasket bottom no. 15
9100456
7,10 €
9,79 € MSRP
-13%
Automatic longitudinal feed compl.
9802510
636,38 €
-30%
Collet set MK 4 / M16
82782
239,62 €
342,98 € MSRP
-8%
BOMAR metal bandsaw
78933
35.321,76 €
-19%
Attachment glass - clear
54612
2,27 €
2,82 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG V-belt drill 16023
16023
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Standard equipment:
- quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 4 / B 16
- tool set
- drive-out
wedge - operating instructions / CE