zoom_in
zoom_out
fullscreen
-13%
ELMAG V-belt bench drill 16019
Sku: T-506911
€378.99 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-495298 | V-belt bench drill | 16020 |
doneTischbohrmaschinen
doneModel KBM 13 TN, 230 V, RE run
doneModel KBM 13 TN, 230 V, RE run
V-belt bench drill Model KBM 13 TN, 230 V., RE barrel|Compact professional bench drills|This is how professionals drill|The KBM 13 TN, 16 TN and 25 TN compact bench
drills have a proven drive system with a powerful, high-quality motor and belt drive. Precision bearings provide high concentricity.
With a 13, 16 or 25 mm steel drilling performance, these
models are well suited for ambitious model makers, hobbyists
- and anyone who appreciates a professionally equipped workshop. Tip: Set offers the ideal price.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
drills have a proven drive system with a powerful, high-quality motor and belt drive. Precision bearings provide high concentricity.
With a 13, 16 or 25 mm steel drilling performance, these
models are well suited for ambitious model makers, hobbyists
- and anyone who appreciates a professionally equipped workshop. Tip: Set offers the ideal price.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-506911
SKU manufacturer:
16019
GTIN Code (EAN):
9004853160196
Weight:
30,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Standard
equipment - quick-action drill chuck B 16, 1 - 13 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE
- TB 125 Vario - klein ganz groß, Die kompakten Tischbohrmaschinen KBM 13 TN, 16 TN und 25 TN
verfügen über ein bewährtes Antriebssystem mit starkem Qualitätsmotor und Riemenantrieb. Durch Verwendung von Präzisionslagern wird eine hohe Rundlaufgenauigkeit erreicht.
Mit einer Bohrleistung in Stahl von 13, 16 bzw 25 mm sind diese
Modelle gut für ambitionierte Modellbauer und Hobbyhandwerker
geeignet - und für alle, die eine professionell ausgestattete Werkstätte zu schätzen wissen. Tipp: Idealer Preis im Set-Angebot. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
13mm
Drilling table area (mm):
197 x 197mm
Drilling table stroke (mm):
230mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
500 - 2.500UpM
Speed stages ():
5
Base plate area (lxb) (mm):
210 x 340mm
Height (total) (mm):
850mm
Displacement (mm):
197 x 197 x 290mm
Engine power (W):
550W
Mains connection (V/Hz):
230 / 50 - 60V/Hz
Pine pitch table min./max. (mm):
60 - 290mm
Pinole gap (mm):
60mm
Column diameter (mm):
60mm
Spindle reception (rotating spindle) ():
MK 2
Thread pitch (mm):
127mm
T-slots, width (mm):
16mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-29%
HSS twist drill case
82031
€61.72
€87.48 MSRP
-32%
Clamping screw 16 mm complete
89039
€24.37
€36.01 MSRP
-14%
KBM 25 TN SET promotion consisting of:
16035
€795.29
-14%
V-belt bench drill
16024
€642.01
-23%
Vice 3’ / 75 mm
88141
€49.20
€63.99 MSRP
-30%
HSS drill cartridge MK 2/MK 3
82032
€138.49
€198.99 MSRP
-12%
HM-Halter Fix verschraubt
9706241
€197.77
-8%
T-reducing connector
11733
€11.97
-12%
Glass measuring rod Mod. KA 500/120
88822
€329.16
-16%
Motor-Abdeckhaube + Lüfterflügel
9010129
€26.18
Attachment glass - clear
55381
€0.41
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-16%
Seals for hydraulic cylinders
9709526
€56.30
€67.02 MSRP
-8%
BOMAR metal bandsaw
78910
€10,246.72
-12%
Core drill HSS, 13x30mm
61821
€28.53
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG V-belt bench drill 16019
16019
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Standard
equipment - quick-action drill chuck B 16, 1 - 13 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE