zoom_in
zoom_out
fullscreen
-14%
ELMAG Universal turning and milling combination 88113
Sku: T-507446
€3,446.30 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
doneSUPERTURN 550\125 Vario
doneconsisting of:1 pc. Universal lathe SUPERTURN 550/125 V. Art. No. 881111 Pcs. Milling and drilling unit MFB 16 Vario Art. No.
doneconsisting of:1 pc. Universal lathe SUPERTURN 550/125 V. Art. No. 881111 Pcs. Milling and drilling unit MFB 16 Vario Art. No.
Universal turning and milling combination consisting of:
1|Superturn + MFB 16 Vario - Set-|Standard features|Special accessories|Universal Lathe SUPERTURN 550/125 Vario
- Milling, boring and boring unit MFB 16 Vario|- Digital speed display
- Three-jaw chuck ø 125 mm, centr.
- MK4 centre
- MK2 centre
- Emergency off button / zero voltage release
- Chuck protection with safety limit switch
- Chip tray / spray wall
- Tool box / operating instructions / CE
- Keyless chuck B 16 / 1 - 16 mm
- Taper mandrel MK 2 / B 16 with IT M10
- Tightening spindle M10|- Four-jaw lathe chuck Ø 125 mm, individual clamping
- Flange Ø 125 mm for SUPERTURN 550/125 Vario
- Face plate Ø 240 mm for SUPERTURN 550/125 Vario
- Revolving centre MK 2
- Travelling rest for SUPERTURN 550/125 Vario
- Fixed rest for SUPERTURN 550/125 Vario
- Quick-change steel holder set MA, 5 piece
- Turning steel set 12 x 12 mm ISO, 5-piece
- Turning steel set 12 x 12 mm ISO, 11-piece
- Indexable insert turning set 12 x 12 mm, 7-piece
- Indexable insert set, 7-piece for turning set 12 x 12 mm
- “Camlock” turning tool set 12 x 12 mm, 7-piece
- SUPERTURN 550/125 Vario subframe
- XY table base plate for MFB 16 Vario
- Titanium milling set, 20 piece, Ø 3 - 20 mm
- Machine vice 3” / 75 mm for SUPERTURN 550/125 Vario
- Collet set MK 2 (ER 25), 10-piece, 2 - 16 mm
1|Superturn + MFB 16 Vario - Set-|Standard features|Special accessories|Universal Lathe SUPERTURN 550/125 Vario
- Milling, boring and boring unit MFB 16 Vario|- Digital speed display
- Three-jaw chuck ø 125 mm, centr.
- MK4 centre
- MK2 centre
- Emergency off button / zero voltage release
- Chuck protection with safety limit switch
- Chip tray / spray wall
- Tool box / operating instructions / CE
- Keyless chuck B 16 / 1 - 16 mm
- Taper mandrel MK 2 / B 16 with IT M10
- Tightening spindle M10|- Four-jaw lathe chuck Ø 125 mm, individual clamping
- Flange Ø 125 mm for SUPERTURN 550/125 Vario
- Face plate Ø 240 mm for SUPERTURN 550/125 Vario
- Revolving centre MK 2
- Travelling rest for SUPERTURN 550/125 Vario
- Fixed rest for SUPERTURN 550/125 Vario
- Quick-change steel holder set MA, 5 piece
- Turning steel set 12 x 12 mm ISO, 5-piece
- Turning steel set 12 x 12 mm ISO, 11-piece
- Indexable insert turning set 12 x 12 mm, 7-piece
- Indexable insert set, 7-piece for turning set 12 x 12 mm
- “Camlock” turning tool set 12 x 12 mm, 7-piece
- SUPERTURN 550/125 Vario subframe
- XY table base plate for MFB 16 Vario
- Titanium milling set, 20 piece, Ø 3 - 20 mm
- Machine vice 3” / 75 mm for SUPERTURN 550/125 Vario
- Collet set MK 2 (ER 25), 10-piece, 2 - 16 mm
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-507446
SKU manufacturer:
88113
GTIN Code (EAN):
9004853881138
Weight:
120,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- ElmagUniversal Dreh- und Fräskombination, Elmag Hersteller-Nummer: 88113
- SUPERTURN 550\125 Vario, bestehend aus:1 Stk. Universal-Drehmaschine SUPERTURN 550/125 V. Art. Nr. 881111 Stk. Fräs- und Bohreinheit MFB 16 Vario Art. Nr.
- TB 125 Vario - klein ganz groß, - Universal Drehmaschine SUPERTURN 550/125 Vario
- Fräs- und Bohreinheit MFB 16 Vario - - Digitale Drehzahlanzeige
- Dreibacken-Drehfutter ø 125 mm, zentr.
- Körnerspitze MK 4
- Körnerspitze MK 2
- Not-Aus-Taster / Nullspannungsauslöser
- Drehfutterschutz mit Sicherheitsendschalter
- Spänewanne / Spritzwand
- Werkzeugbox / Bedienungsanleitung / CE
- Schnellspannbohrfutter B 16 / 1 - 16mm
- Kegeldorn MK 2 / B 16 mit IG M10
- Anzugsspindel M10 - - Vierbacken-Drehfutter ø 125 mm, einzelspannend
- Flansch ø 125 mm für SUPERTURN 550/125 Vario
- Planscheibe ø 240 mm für SUPERTURN 550/125 Vario
- Mitlaufende Körnerspitze MK 2
- Mitlauflünette für SUPERTURN 550/125 Vario
- Stehlünette für SUPERTURN 550/125 Vario
- Schnellwechsel-Stahlhalter-Set MA, 5-teilig
- Drehstähle-Satz 12 x 12 mm ISO, 5-teilig
- Drehstähle-Satz 12 x 12 mm ISO, 11-teilig
- Wendeplatten-Drehmeißel-Satz 12 x 12 mm, 7-teilig
- Wendeplatten-Satz 7-teilig für Drehmeißel-Satz 12 x 12 mm
- Drehmeißel-Satz „Camlock“ 12 x 12 mm, 7-teilig
- Untergestell SUPERTURN 550/125 Vario
- Koordinatentisch-Grundplatte zu MFB 16 Vario
- Fräsersatz TITAN, 20-teilig, ø 3 - 20 mm
- Schraubstock 3' / 75 mm für SUPERTURN 550/125 Vario
- Spannzangen-Set MK 2 (ER 25), 10-teilig, 2 - 16 mm
Additional information
Drilling capacity in steel (mm):
16mm
Width (mm):
650mm
Swing diameter over bed (mm):
250mm
Rotary diameter over slide (mm):
145mm
Twist drill cross-section, max. (mm):
12 x 12mm
Face mill lead (mm):
210mm
Face mill swivel range (°):
± 90°
Milling capacity face mill (mm):
50mm
Milling capacity Shaft milling cutter (mm):
16mm
Thread size metric (mm):
0,4 - 3,5mm
Height (mm):
500mm
Length (mm):
1.250mm
Longitudinal advance (mm/U):
0,07 - 0,20mm/U
Machine bed width (mm):
135mm
Upper slide way (mm):
50mm
Pine needle intake ():
MK 2
Pin diameter (mm):
30mm
Pinole gap (mm):
50mm
Pinolen path (mm):
70mm
Cross-country ski track (mm):
115mm
Spindle reception (rotating spindle) ():
MK 4
Thread pitch (mm):
169mm
Spindle bore (mm):
26mm
Peak width (mm):
550mm
Threads, threads G (G/):
8 - 56G/'
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
Universal lathe
88003
€6,633.27
-14%
Universal lathe
88111
€2,478.11
-8%
Universal lathe
88004
€7,238.39
-14%
Universal lathe
88110
€1,486.85
-14%
Universal turning and milling combination
88114
€4,598.91
-8%
Universal lathe
88150
€8,281.50
-13%
Universal lathe
88112
€3,192.73
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
-18%
Ball bearing (item 26)
9403379
€10.55
€12.90 MSRP
-8%
BOMAR metal bandsaw
78910
€10,246.72
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-12%
HM-Halter Fix verschraubt
9706241
€197.77
-28%
Grinding belt support no. 65
9820120
€14.45
€20.00 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Universal turning and milling combination 88113
88113
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- ElmagUniversal Dreh- und Fräskombination, Elmag Hersteller-Nummer: 88113
- SUPERTURN 550\125 Vario, bestehend aus:1 Stk. Universal-Drehmaschine SUPERTURN 550/125 V. Art. Nr. 881111 Stk. Fräs- und Bohreinheit MFB 16 Vario Art. Nr.