zoom_in
zoom_out
fullscreen
-8%
ELMAG Universal milling machine 82161
Sku: T-498566
€16,338.24 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
Piece
doneUFM 230 L \ 250 L
doneUFM 250 Linkl. 3-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out
doneUFM 250 Linkl. 3-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out
Universal milling machine UFM 250 L
incl. 3-axis position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Ultimate technologyPin sleeve feed|with three feed stages, infinitely variable automatic
feed in three milling table axes, milling head swivel range for difficult spatial
positions +-90° and +-45°, milling head turning range +- 90° - with these key
data, the UFM 250 L proves itself to be a highly automated
, very flexibly usable multi-purpose milling machine.
thanks to a drive power of 2,250 watts and an infinitely
variable speed up to top speed 4,500 rpm is, in addition to the use of standard feed stages, infinitely variable automatic feed in three milling table axes, milling head swivel range for difficult spatial positions +-90° and +-45°, the UFM 250 L proves to be a highly automated multi-purpose milling machine. thanks to a drive power of 2,250 watts and an infinitely variable speed up to top speed 4,500 rpm is, in addition to the use of standard feed stages, infinitely variable automatic feed in three milling table axes.
incl. 3-axis position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Ultimate technologyPin sleeve feed|with three feed stages, infinitely variable automatic
feed in three milling table axes, milling head swivel range for difficult spatial
positions +-90° and +-45°, milling head turning range +- 90° - with these key
data, the UFM 250 L proves itself to be a highly automated
, very flexibly usable multi-purpose milling machine.
thanks to a drive power of 2,250 watts and an infinitely
variable speed up to top speed 4,500 rpm is, in addition to the use of standard feed stages, infinitely variable automatic feed in three milling table axes, milling head swivel range for difficult spatial positions +-90° and +-45°, the UFM 250 L proves to be a highly automated multi-purpose milling machine. thanks to a drive power of 2,250 watts and an infinitely variable speed up to top speed 4,500 rpm is, in addition to the use of standard feed stages, infinitely variable automatic feed in three milling table axes.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-498566
SKU manufacturer:
82161
GTIN Code (EAN):
9004853821615
Weight:
1400,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Quill feed and automatic feed X/Y/Z
- Milling capacity O 125/40
- Cubature 1,240 x 230 x 415 / 1,370 x 254 x 405 mm
- Spindle reach 170 - 530 or 190 - 730 mm
- Table travel 700 x 300 or 930 x 370 mm
- Drive motor 2,250 W, 400 V
- Stepless speed adjustment 65 - 4,500 rpm
- Right and left rotation
- Automatic quill feed,
3-stage 0.04 - 0.15 mm/rev. - Precision microfeed
- Milling spindle with precision bearing
- Pneumatic tool clamp, tightening spindle
- Mechanical spindle brake
- Drilling depth scale and stop
- Smooth-running, precise cross table
with T-slots and coolant channel - X, Y and Z axis cross table with stepless automatic feed
- Centralized lubrication
- Integrated coolant system with return flow
- LED milling table lighting
- With SINO digital position display
- TB 125 Vario - klein ganz groß, Pinolenvorschub mit drei Vorschubstufen, stufenloser Automatikvorschub
in drei Frästischachsen, Fräskopf-Schwenkbereich für schwierige räumliche
Lagen +-90° und +-45°, Fräskopf-Drehbereich +- 90° - mit diesen Eck-
daten beweist sich die UFM 250 L als hoch automat-
isierte, sehr flexibel verwendbare Mehrzweckfräsmaschinen.
Dank einer Antriebsleistung von 2.250 Watt und einer stufenlos
einstellbaren drehzahl bis Top-speed 4.500 UpM ist neben der Verwendung von Standard-fräs- und Bohrwerkzeugen sogar der
Einsatz von luftgekühlten Fließbohrern möglich.
Zeitsparend und besonders sicher erweist sich ein auf dem Fräskopf
angebrachter, pneumatischer Werkzeugspanner mit Anzugsstange für
das halbautomatische Spannen und Lösen von Fräs- und Bohrwerkzeugen.
Von Vorteil ist auch eine mechanische Spindelbremse, die mittels eines
Handhebels betätigt wird.
Die Maschine ist mit einer Zentralschmierung der Führungsbahnen,
mit einem Kühlmittelsystem mit Tank im Maschinensockel und - für
rasches und präzises Handling besonders wichtig - mit einer digitalen
Positionsanzeige SINO ausgestattet.
Aufgrund des hohen Automatisierungsgrades ist das UFM-Modell
perfekt für die Serienproduktion geeignet, das Modell UFM 250 L mit einer
Frästischgröße von 1.370 x 254 mm auch für sehr große Werkstücke.
Additional information
Drilling capacity in steel (mm):
50mm
Speed range (UpM):
65 - 4.500UpM
Speed stages ():
stufenlos
Face mill swivel range (°):
± 90° / ± 45°
Milling capacity face mill (mm):
125mm
Milling capacity Shaft milling cutter (mm):
40mm
Milled surface (mm):
1.370 x 254mm
Height (mm):
2.240mm
Displacement (mm):
1.370 x 254 x 405mm
Length x Width (mm):
1.640 x 1.800mm
Engine power (W):
2.250W
Mains connection (V/Hz):
400 / 50 - 60V/Hz
Pine pitch table min./max. (mm):
0 - 405mm
Pinole gap (mm):
125mm
Pinole feed stages:
3
Pinole feed (mm/U):
0,04 - 0,15mm/U
Spindle reception (rotating spindle) ():
ISO 40
Thread pitch (mm):
190 - 730mm
Table travel X x Y (mm):
930 x 370mm
T-slots, width (mm):
16mm
Feed rates X/Y/Z ():
stufenlos
Feed rates X/Y/Z (mm/min):
0,04 - 0,15mm/min
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
Universal milling machine
82160
€14,730.34
-8%
Tool milling machine
82127
€48,156.05
Attachment glass - clear
55381
€0.41
-8%
BOMAR metal bandsaw
78933
€37,091.01
-28%
Screw cable lug 14/50 mm2
59635
€10.08
€13.91 MSRP
-12%
Core drill HSS, 13x30mm
61821
€28.53
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-10%
Angle stop 0-180°
9601337
€45.67
-13%
Glass measuring rod Mod. KA 300/120
88801
€243.11
GI seal no. 12
9302075
€2.14
-13%
Automatic longitudinal feed compl.
9802510
€711.30
-16%
HF plug 10 pin
9505580
€55.13
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Universal milling machine 82161
82161
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Quill feed and automatic feed X/Y/Z
- Milling capacity O 125/40
- Cubature 1,240 x 230 x 415 / 1,370 x 254 x 405 mm
- Spindle reach 170 - 530 or 190 - 730 mm
- Table travel 700 x 300 or 930 x 370 mm
- Drive motor 2,250 W, 400 V
- Stepless speed adjustment 65 - 4,500 rpm
- Right and left rotation
- Automatic quill feed,
3-stage 0.04 - 0.15 mm/rev. - Precision microfeed
- Milling spindle with precision bearing
- Pneumatic tool clamp, tightening spindle
- Mechanical spindle brake
- Drilling depth scale and stop
- Smooth-running, precise cross table
with T-slots and coolant channel - X, Y and Z axis cross table with stepless automatic feed
- Centralized lubrication
- Integrated coolant system with return flow
- LED milling table lighting
- With SINO digital position display