zoom_in
zoom_out
fullscreen
-8%
ELMAG Universal milling machine 82139
Sku: T-496919
€22,983.03 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
Piece
doneUFM 125 \ 125 GT
doneModel UFM 125 GTincl. 3-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run by RÖHM.
doneModel UFM 125 GTincl. 3-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run by RÖHM.
Universal milling machine Model UFM 125 GT
incl. 3-axle position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Unique ’2 in 1’ conceptThe|Standard features|swivel head of the UFM 125 GT can be adjusted at almost any angle and, in addition to normal face and shank milling operations, enables the machining of fitting surfaces and grooves in difficult
spatial positions.
For face milling of large workpiece surfaces, the machine
can be converted to a horizontal milling machine in just a few steps (horizontal spindle on the machine column).
Thanks to the high drive power of 3,000 watts, the
machine is suitable for face milling cutter diameters of up to 150 mm.
The machine is equipped with a cross table and a cross table. 11 (12) speed stages and 8
feed stages offer sufficient clearance for optimizing the cutting
speed. A central lubrication of the guideways for
rapid availability and a coolant system with tank in the machine
base are
very advantageous.
The UFM 125 GT model is recommended for continuous operation and for larger workpieces due to the more robust design and the larger cross table.|position indicator SINO SDS6-3V
Collet set 4, 5, 6, 8, 10, 12, 14 and 16 mm with collet chuck
Tool set Operating
instructions / CE
incl. 3-axle position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Unique ’2 in 1’ conceptThe|Standard features|swivel head of the UFM 125 GT can be adjusted at almost any angle and, in addition to normal face and shank milling operations, enables the machining of fitting surfaces and grooves in difficult
spatial positions.
For face milling of large workpiece surfaces, the machine
can be converted to a horizontal milling machine in just a few steps (horizontal spindle on the machine column).
Thanks to the high drive power of 3,000 watts, the
machine is suitable for face milling cutter diameters of up to 150 mm.
The machine is equipped with a cross table and a cross table. 11 (12) speed stages and 8
feed stages offer sufficient clearance for optimizing the cutting
speed. A central lubrication of the guideways for
rapid availability and a coolant system with tank in the machine
base are
very advantageous.
The UFM 125 GT model is recommended for continuous operation and for larger workpieces due to the more robust design and the larger cross table.|position indicator SINO SDS6-3V
Collet set 4, 5, 6, 8, 10, 12, 14 and 16 mm with collet chuck
Tool set Operating
instructions / CE
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-496919
SKU manufacturer:
82139
GTIN Code (EAN):
9004853821394
Weight:
2000,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Automatic feed X/Y/Z
- Milling capacity O 150/50 mm
- Cubature 1.320 x 320 x 650 mm
- Spindle projection 200-760 mm
- Table travel 1.000x290 mm
- Tilting milling head +-180°
- Simple conversion to horizontal milling machine
- Drive motor 3,000 W
- Wide speed range
- Right and left rotation
- Milling spindles with precision bearings
- Tightening spindles for high safety
- Milling spindle protection cover
- Smooth-running, precise cross table with T-slots and coolant channel
- Cross table X- and Y-axis with 8 feed stages
- Cross table Z-axis with drive
- Centralized lubrication
- Integrated coolant system with return line, tank in machine base
- LED milling table lighting
- With SINO digital position display
- TB 125 Vario - klein ganz groß, Der Schwenkkopf der UFM 125 GT ist in nahezu jedem Winkel einstellbar und ermöglicht neben normalen Plan- und Schaftfräsarbeiten eine Bearbeitung von Passflächen und -nuten in schwieriger
räumlicher Lage.
Für das Planfräsen großer Werkstücksflächen ist die Maschine
mit wenigen Handgriffen (Horizontalspindel an der Maschinensäule) zu einer Horizontalfräse umrüstbar.
Dank der hohen Antriebsleistung von 3.000 Watt ist die
Maschine für Planfräserdurchmesser bis 150 mm geeignet.
Die Maschine ist mit einem Kreuztisch-Automatikvorschub der
X- und Y-Achse und einem Eilgang der Z-Achse für rasche Tisch-
positionierung ausgestattet. 11 (12) Drehzahlstufen und 8
Vorschubstufen bieten ausreichend Spielraum für eine Optimierung der
Schnittgeschwindigkeit.
Sehr vorteilhaft sind eine Zentralschmierung der Führungsbahnen für
rasche Verfügbarkeit und ein Kühlmittelsystem mit Tank im Maschinen-
sockel.
Für den durchgehenden Dauerbetrieb und für größere Werkstücke wird aufgrund der robusteren Bauweise und des größeren Kreuztisches das Modell UFM 125 GT empfohlen. - Digitale Positionsanzeige SINO SDS6-3V
Spannzangenset 4, 5, 6, 8, 10, 12, 14 und 16 mm mit Spannzangenfutter
Werkzeugsatz
Bedienungsanleitung / CE
Additional information
Speed range horizontal (UpM):
40 - 1.300UpM
Speed range vertical (UpM):
45 - 1.660UpM
Speed stages horizontal ():
12
Speed stages vertical ():
11
Rapid traverse X/Y ():
Ja
Face mill swivel range (°):
± 180°
Milling capacity face mill (mm):
150mm
Milling capacity Shaft milling cutter (mm):
50mm
Milled surface (mm):
1.320 x 320mm
Milling stroke (mm):
450mm
Height (mm):
1.994mm
Horizontal spindle distance table (mm):
20 - 470mm
Displacement (mm):
1.320 x 320 x 650mm
Coolant pump (W):
90W
Length x Width (mm):
2.020 x 1.710mm
Engine power (W):
3.000W
Mains connection (V/Hz):
400 / 50-60V/Hz
Pine pitch table min./max. (mm):
200 - 650mm
Spindle reception (rotating spindle) ():
ISO 40
Thread pitch (mm):
200 x 760mm
Table travel X x Y (mm):
1.000 x 290mm
T-slots / Width x Distance (mm):
5 / 14 x 63mm
Feed drive X/Y (W):
550W
Feed drive Z (W):
750W
Feed stages X/Y ():
8
Feed rate Z (mm/min):
400mm/min
Pre-advances X/Y (mm/min):
20 - 360mm/min
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
Universal milling machine
82133
€15,612.10
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
Attachment glass - clear
55381
€0.41
-28%
Conical mandrel MK 2 / B 16
17055
€11.50
€16.01 MSRP
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-13%
Automatic longitudinal feed compl.
9802510
€711.30
-8%
BOMAR metal bandsaw
78933
€37,091.01
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-8%
BOMAR metal bandsaw
78918
€21,674.87
-32%
Grinding belt for MBS/BSM
82071
€19.16
€27.98 MSRP
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
-41%
HSS Co5 shell end mill DIN 1880
74200
€112.14
€191.00 MSRP
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Universal milling machine 82139
82139
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Automatic feed X/Y/Z
- Milling capacity O 150/50 mm
- Cubature 1.320 x 320 x 650 mm
- Spindle projection 200-760 mm
- Table travel 1.000x290 mm
- Tilting milling head +-180°
- Simple conversion to horizontal milling machine
- Drive motor 3,000 W
- Wide speed range
- Right and left rotation
- Milling spindles with precision bearings
- Tightening spindles for high safety
- Milling spindle protection cover
- Smooth-running, precise cross table with T-slots and coolant channel
- Cross table X- and Y-axis with 8 feed stages
- Cross table Z-axis with drive
- Centralized lubrication
- Integrated coolant system with return line, tank in machine base
- LED milling table lighting
- With SINO digital position display