zoom_in
zoom_out
fullscreen
ELMAG Inert gas welding system 54000
Sku: T-499349
Discontinued item
doneDIGI-MIG 3000 SYNERGY
doneDIGI-MIG 3000 SYNERGY / DMS 250
doneDIGI-MIG 3000 SYNERGY / DMS 250
Inert gas welding system DIGI-MIG 3000 SYNERGY / DMS 250|Product description|A tried and tested process: MIG brazing|Optimum wire feed|Application examples -|Materials|Increasing demands on the weld seam quality require perfection in welding processes. At the same time, reliable and rapid reproducibility of welding settings is required.
Perfect, repeatable synergy programs
DIGI-MIG devices meet the highest demands in terms of quality and reproducibility of inert gas welding.
They allow:
- extensive automation of the welding process through synergy programs,
- a clear definition of welding parameters that can be reproduced reliably and quickly,
- inclusion of welding parameters in a quality assurance system.
The DIGI-MIGs are therefore a revolutionary technical solution for use in trade, commerce and industry.|The DIGI-MIG DMS 250 provides optimum welding current for MIG brazing, which is widely used in bodywork, machine and steel construction. Thin sheets - whether galvanised, phosphated, uncoated or made of stainless steel
- are permanently bonded at low soldering temperatures. Advantages: Low warpage, reduced microstructural changes and cathodic protection of galvanised sheet steel, while also simplifying
reworking of the weld. CuSi3 copper solder wire is used. The solder joint is protected by C2 mixed gas made of 98% Ar and 2% CO2.|After selecting a synergy program and the parameters for welding performance, wire thickness and material/protective gas, synergistic characteristics are used for optimum, automatic wire feed|- Mechanical engineering
- Plant construction
- Tank construction
- Steel construction
- Metalworking shops
- Forges
- Agriculture|- Steel
- CrNi
- Aluminium
- MIG brazing (DMS 250)
Perfect, repeatable synergy programs
DIGI-MIG devices meet the highest demands in terms of quality and reproducibility of inert gas welding.
They allow:
- extensive automation of the welding process through synergy programs,
- a clear definition of welding parameters that can be reproduced reliably and quickly,
- inclusion of welding parameters in a quality assurance system.
The DIGI-MIGs are therefore a revolutionary technical solution for use in trade, commerce and industry.|The DIGI-MIG DMS 250 provides optimum welding current for MIG brazing, which is widely used in bodywork, machine and steel construction. Thin sheets - whether galvanised, phosphated, uncoated or made of stainless steel
- are permanently bonded at low soldering temperatures. Advantages: Low warpage, reduced microstructural changes and cathodic protection of galvanised sheet steel, while also simplifying
reworking of the weld. CuSi3 copper solder wire is used. The solder joint is protected by C2 mixed gas made of 98% Ar and 2% CO2.|After selecting a synergy program and the parameters for welding performance, wire thickness and material/protective gas, synergistic characteristics are used for optimum, automatic wire feed|- Mechanical engineering
- Plant construction
- Tank construction
- Steel construction
- Metalworking shops
- Forges
- Agriculture|- Steel
- CrNi
- Aluminium
- MIG brazing (DMS 250)
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-499349
SKU manufacturer:
54000
GTIN Code (EAN):
9004853540004
Weight:
102,50 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- User-friendly: rotating high-tech control console
- Practical: tool and utensil compartment with protective cover
- Thought of everything: holder for protective cap
- Handy: welding torch holder
- High-performance transformer with rear-ventilated copper winding, insulation class H (180°C)
- Large-size silicon plate rectifier for highest welding quality and long service life
- Thermal overload protection with automatic reset and temperature control lamp
- Powerful cooling fan with thermostat control
- DIGI-MIG DMS 250
- Original BINZEL hose package MB 25, 4 m
- Earth terminal with 3 m earth cable 50 mm² and welding cable plug Ø 13 mm, 35/50 mm²
- Pressure regulator with cylinder pressure gauge and flow meter
- Feed ring O 30 for welding rod O 0,6/0,8 mm
- Feed ring O 30 for welding rod O 1.0/1.2 mm
- Wire spool adapter 5 kg, O 200 mm
- Wire coil adapter 15 kg, O 300 mm
- Hand welding screen, PVC, including welding glass
- Release agent spray for welding nozzles
- Operating instructions/CE
- TB 125 Vario - klein ganz groß, Die DIGI-MIG DMS 250 liefert optimalen Schweißstrom für das im Karosserie-, Maschinen- und Stahlbau häufig eingesetzte MIG-Hartlöten. Feinbleche - ob verzinkt, phosphatiert, unbeschichtet oder aus Edelstahl
- werden bei niedriger Löttemperatur dauerhaft verbunden. Vorteile: Geringer Verzug, reduzierte Gefügeveränderungen, sowie kathodische Schutzwirkung bei verzinktem Stahlblech, weiters wird die
Nachbearbeitung der Schweißnaht vereinfacht. Verwendet wird Kupferlötdraht CuSi3. Die Lötstelle wird mittels Mischgas C2 aus 98 % Ar und 2 % CO2 geschützt. - Nach Auswahl eines Synergieprogramms und der Parameter Schweißleistung, Drahtstärke und Material/Schutzgas werden synergetische Kennlinien für einen optimalen, automatischen Drahtvorschub angewandt
- - Maschinenbau
- Anlagenbau
- Behälterbau
- Stahlbau
- Schlossereien
- Schmieden
- Landwirtschaft
Additional information
Aluminium wire diameter (mm):
1,0 - 1,2mm
Terminal sockets (mm²):
ø 13 / 50mm²
Anschlussstecker:
CEE 16 A
Width (mm):
530mm
Switch-on time (10 min at 40°C) at max. welding current (% / A):
35 / 250% / A
100 % switch-on time (10 min at 40 °C) at welding current (A):
150A
Height (mm):
980mm
Materials:
- Stahl
- CrNi
- Alu
- MIG-Hartlöten (DMS 250)
- CrNi
- Alu
- MIG-Hartlöten (DMS 250)
Material thickness (mm):
0,5 - 10mm
Grid security sluggish (AT):
16AT
Mains connection / Phases (V / ~):
400 / 3V / ~
Mains frequency (Hz):
50/60Hz
Protection type (IP):
21
Welding wire roll diameter (mm):
200 / 300mm
Welding wire reel weight (kg):
5 / 15kg
Welding current setting range (A):
15 - 250A
Welding current switching stages (no.):
10Anz.
Steel / Stainless Steel Wire Diameter (mm):
0,6 - 1,2mm
Depth (mm):
880mm
Feed drive X/Y/Z (rollers):
4Rollen
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-22%
Stop bracket for pusher (no. 35)
9403033
€2.61
€3.32 MSRP
-8%
BOMAR metal bandsaw
78910
€10,246.72
-12%
Glass measuring rod Mod. KA 300/920
88817
€419.83
-28%
Screw cable lug 14/50 mm2
59635
€10.08
€13.91 MSRP
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-16%
HF plug 10 pin
9505580
€55.13
-12%
HM-Halter Fix verschraubt
9706241
€197.77
-19%
WIG-Schlauchpaket SRC ONE 26/4m - HF U/D (1DTPV)
15850
€183.82
€226.01 MSRP
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
-24%
Square shaft (no. 6)
9403041
€108.03
€142.00 MSRP
-14%
Automatic condensate drain
11261
€198.95
-28%
Cast handwheel
9106013
€40.34
€56.01 MSRP
-13%
Automatic longitudinal feed compl.
9802510
€711.30
GI seal no. 12
9302075
€2.14
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Inert gas welding system 54000
54000
ELMAG Entwicklungs- und Handels GmbH
Welding Technology
- User-friendly: rotating high-tech control console
- Practical: tool and utensil compartment with protective cover
- Thought of everything: holder for protective cap
- Handy: welding torch holder
- High-performance transformer with rear-ventilated copper winding, insulation class H (180°C)
- Large-size silicon plate rectifier for highest welding quality and long service life
- Thermal overload protection with automatic reset and temperature control lamp
- Powerful cooling fan with thermostat control
- DIGI-MIG DMS 250
- Original BINZEL hose package MB 25, 4 m
- Earth terminal with 3 m earth cable 50 mm² and welding cable plug Ø 13 mm, 35/50 mm²
- Pressure regulator with cylinder pressure gauge and flow meter
- Feed ring O 30 for welding rod O 0,6/0,8 mm
- Feed ring O 30 for welding rod O 1.0/1.2 mm
- Wire spool adapter 5 kg, O 200 mm
- Wire coil adapter 15 kg, O 300 mm
- Hand welding screen, PVC, including welding glass
- Release agent spray for welding nozzles
- Operating instructions/CE