Commercial customer offer**
ELMAG Pre-filter including automatic drain 12605
Sku: T-492913
€532.61 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
doneVorfilter Serie G
doneFG79, 7930 l/min, female thread 1 1/4’
doneFG79, 7930 l/min, female thread 1 1/4’
Pre-filter including automatic drain G79, 7,932 l/min., IT 1 1/4” - 11|How clean is your compressed air?|Filters from MARK keep your compressed air network in perfect shape!|Pre-filter - filter range G|Typical installations|Protect your compressed air installations against:|Compressed air according to ISO 8573-1:2010|By nature, atmospheric air already contains various impurities such as dust, a variety of hydrocarbons and water in the form of humidity. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream equipment. Quality treatment solutions remove these impurities from the compressed air.|At least one filter must be installed in each compressed air network. This improves air quality, which is beneficial for your entire compressed air network, including downstream dryers, air ducts and pneumatic tools. Depending on the application, you may need to filter the air in several stages to prevent saturation of the elements, maintain the air quality and avoid drops in pressure.|Coalescing filters for general protection. Remove solid particles, liquid water and oil aerosol.
Separation efficiency: 99%
In order to achieve an optimum filter effect, a filter of type G should be preceded by a water separator.
Illustration with differential pressure indicator option|A. General protection
(Air purity corresponds to ISO 8573-1: G filter class 3:-:3)
B. General protection and reduced oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:-:2)
C. High-quality compressed air with reduced dew point
(Air purity corresponds to ISO 8573-1: Class 1:4:2)
D. High-quality compressed air with reduced dew point and oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:4:1)
1 Compressor with aftercooler and/or cyclone separator “WS”
2 Pre-filter “G”
3 Fine filter “C”
4 Active carbon filter “V”
5 MDX refrigeration dryer|- Moisture
- Particles
- Oil
- Hydrocarbon
- Viruses
- Bacteria|Depending on the customer’s application, a certain level of air purity is required. These purity requirements have been classified into air purity classes. The purity classes are defined in the ISO 8573-1 standard, 2010 edition. This table defines seven air purity classes from 0 to 6 according to the following rule: the lower the class, the higher the air quality. The enclosures and elements are manufactured with high-quality components in accordance with ISO 12500-1.
Separation efficiency: 99%
In order to achieve an optimum filter effect, a filter of type G should be preceded by a water separator.
Illustration with differential pressure indicator option|A. General protection
(Air purity corresponds to ISO 8573-1: G filter class 3:-:3)
B. General protection and reduced oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:-:2)
C. High-quality compressed air with reduced dew point
(Air purity corresponds to ISO 8573-1: Class 1:4:2)
D. High-quality compressed air with reduced dew point and oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:4:1)
1 Compressor with aftercooler and/or cyclone separator “WS”
2 Pre-filter “G”
3 Fine filter “C”
4 Active carbon filter “V”
5 MDX refrigeration dryer|- Moisture
- Particles
- Oil
- Hydrocarbon
- Viruses
- Bacteria|Depending on the customer’s application, a certain level of air purity is required. These purity requirements have been classified into air purity classes. The purity classes are defined in the ISO 8573-1 standard, 2010 edition. This table defines seven air purity classes from 0 to 6 according to the following rule: the lower the class, the higher the air quality. The enclosures and elements are manufactured with high-quality components in accordance with ISO 12500-1.
Content:
1 Piece
Shipping:
€167.98 Versandservice to United Kingdom
plus €9.90 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-492913
SKU manufacturer:
12605
GTIN Code (EAN):
9004853126055
Weight:
1,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Options:
- Differential pressure gauge
- Differential pressure indicator
- Wall mounting kit for simplified installation - * Reference conditions: Pressure 7 bar (102 psi), temperature 20°C. Maximum operating temperature 66°C, for series V: 35°C. Minimum operating temperature 1°C.
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-28%
Nozzle, long, 1.2mm for CB70 (PD0063-12)
58188
€51.59
€72.01 MSRP
-7%
Valve cover gasket f. KUBOTA engine
9503333
€27.94
-7%
Oil filter for BOMAR bandsaws
9706142
€13.40
-18%
Front housing part (red)
9501023
€112.14
€137.02 MSRP
-8%
Sandblasting hose, rubber, 25x40 mm, 10 metres
21295
€233.82
-28%
BI-METAL cobalt M42 bandsaw blade
78423
€48.03
€66.51 MSRP
-7%
Filter set for ÖWAMAT 11
11296
€155.92
-19%
Bundle tensioning device manual
78912
€394.28
€486.01 MSRP
-8%
V block set (2 pieces)
81861
€781.47
-28%
Holder (item 39)
9708458
€42.14
€58.49 MSRP
-28%
Ammeter 0-50 A. 70x60mm for
9505117
€42.14
€58.49 MSRP
-26%
Coupling complete no. 55-59
9807114
€52.18
€70.50 MSRP
-16%
Twin plug with “KG004” handle
9403983
€55.13
-15%
Base for BSM 100x1220 N
82039
€43.91
-10%
Fuel filter for VOLVO-PENTA engines
9503820
€204.75
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Pre-filter including automatic drain 12605
12605
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Options:
- Differential pressure gauge
- Differential pressure indicator
- Wall mounting kit for simplified installation - * Reference conditions: Pressure 7 bar (102 psi), temperature 20°C. Maximum operating temperature 66°C, for series V: 35°C. Minimum operating temperature 1°C.