zoom_in
zoom_out
fullscreen
ELMAG Pre-filter including automatic drain 12205
Sku: T-496477
Discontinued item
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-493660 | pre-filter incl. autom. trap | 12201 | |
|
T-501560 | Pre-filter incl. autom. trap | 12200 | |
|
T-505310 | Pre-filter incl. autom. trap | 12204 | |
|
T-505720 | Prefilter incl. autom. arrester | 12203 | |
|
T-506602 | Pre-filter incl. autom. trap | 12202 |
doneVorfilter Serie G
doneG84, 8,400 l/min., female thread 1 1/2’
doneG84, 8,400 l/min., female thread 1 1/2’
Pre-filter including automatic drain G84, 8.400 l/min., IG 1 1/2’|Pre- filter - filter range G|How clean is your compressed air?|MARK filters keep your compressed air network in optimum shape!|Coalescing filters for general protection.
Remove solid particles, liquid water
and oil aerosol.
Separation efficiency: 99%
For optimum filter performance, a Type G filter
should always be fitted upstream of a water separator.
Illustration with differential pressure indicator option|Atmospheric air naturally contains a variety of impurities such as dust, various hydrocarbons and water in the form of moisture. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream systems.
Quality treatment solutions remove these contaminants from the compressed air.|The installation of one or more filters is essential in every compressed air network. This results in a higher air quality that will benefit your entire compressed air network, including the downstream dryers, compressed air lines and pneumatic tools. It is advisable to treat the compressed air in different stages by using two or three filters.
With only a single filter, rapid saturation of the filter
could occur, which could lead to pressure loss, reduced air quality, or premature replacement of the filter elements.
Remove solid particles, liquid water
and oil aerosol.
Separation efficiency: 99%
For optimum filter performance, a Type G filter
should always be fitted upstream of a water separator.
Illustration with differential pressure indicator option|Atmospheric air naturally contains a variety of impurities such as dust, various hydrocarbons and water in the form of moisture. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream systems.
Quality treatment solutions remove these contaminants from the compressed air.|The installation of one or more filters is essential in every compressed air network. This results in a higher air quality that will benefit your entire compressed air network, including the downstream dryers, compressed air lines and pneumatic tools. It is advisable to treat the compressed air in different stages by using two or three filters.
With only a single filter, rapid saturation of the filter
could occur, which could lead to pressure loss, reduced air quality, or premature replacement of the filter elements.
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-496477
SKU manufacturer:
12205
GTIN Code (EAN):
9004853122057
Weight:
2,20 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Optional equipment:
- Differential pressure gauge
- Differential pressure indicator
- Connection kit for easy series fitting of filters
- Wall fitting kit for simplified installation
- Connection kit for easy installation BEKOMAT - * Reference conditions: pressure 7 bar (102 psi), temperature 20 °C. Maximum operating temperature 66 °C, for series V: 35 °C. Minimum operating temperature 1 °C.
- TB 125 Vario - klein ganz groß, Koaleszierende Filter für allgemeinen Schutz.
Entfernen Feststoffpartikel, flüssiges Wasser
und Öl-Aerosol.
Abscheidegrad: 99 %
Zur Erzielung einer optimalen Filterwirkung sollte einem Filter
des Typs G ein Wasserabscheider vorgeschaltet sein.
Abbildung mit Option Differenzdruckindikator - Der Einbau eines oder mehrerer Filter ist in jedem Druckluftnetz unumgänglich. So wird eine höhere Luftqualität erreicht, die Ihrem gesamten Druckluftnetz, einschließlich der nachgeschalteten Trockner, Druckluftleitungen und Druckluftwerkzeuge zugute kommt. Es wird empfohlen, die Druckluft durch Verwendung von zwei oder drei Filtern in verschiedene Stufen aufzubereiten.
Bei nur einem einzelnen Filter könnte eine rasche Sättigung des Filters
auftreten, die zu Druckverlust, reduzierter Luftqualität oder einem vorzeitigen Austausch der Filterelemente führen könnte.
Additional information
Dimensions (mm):
A: 140 / B: 34 / C: 449mm
Thread connection inch:
1 1/2Zoll
Clearance for filter cartridge replacement (mm):
100mm
Maximum pressure (bar):
16bar
Nominal capacity (l/min):
8.400l/min
Type:
G84
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
BOMAR metal bandsaw
78910
€10,246.72
-13%
Glass measuring rod Mod. KA 500/420
88828
€380.29
-16%
HF plug 10 pin
9505580
€55.13
-16%
Seals for hydraulic cylinders
9709526
€56.30
€67.02 MSRP
-22%
Stop bracket for pusher (no. 35)
9403033
€2.61
€3.32 MSRP
-19%
WIG-Schlauchpaket SRC ONE 26/4m - HF U/D (1DTPV)
15850
€183.82
€226.01 MSRP
GI seal no. 12
9302075
€2.14
-8%
Hydraulische Werkstattpresse 15 Tonnen - Tischmodell
81902
€580.92
-8%
T-reducing connector
11733
€11.97
Attachment glass - clear
55381
€0.41
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-29%
CONDOR pressure switch
11920
€39.16
€55.00 MSRP
-18%
Ball bearing (item 26)
9403379
€10.55
€12.90 MSRP
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Pre-filter including automatic drain 12205
12205
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Optional equipment:
- Differential pressure gauge
- Differential pressure indicator
- Connection kit for easy series fitting of filters
- Wall fitting kit for simplified installation
- Connection kit for easy installation BEKOMAT - * Reference conditions: pressure 7 bar (102 psi), temperature 20 °C. Maximum operating temperature 66 °C, for series V: 35 °C. Minimum operating temperature 1 °C.