zoom_in
zoom_out
fullscreen
-8%
ELMAG Motorised ring bending machine 83132
Sku: T-507086
€4,535.50 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
doneRingbiegemaschinen - APK 30\35\40\45\50
doneAPK 35
doneAPK 35
Motorised ring bending machine APK 35|High-quality ring bending|High-quality drive solution|Precise rolling straightening systems|Roller sets|InstallationAll|Application examples -|Standard features|Special accessories|Simple bending radius or full circle - the APK ring bending machines
enable precise rolling of bar materials such as flat, square, round, tubular and shaped steel.|The heart of the APK models is a powerful drive motor with a durable reduction gearbox. The forward and reverse thrust of the drive rollers takes place on a mobile control panel with double foot pedal. The roller transmission with quality bearings and specially
hardened gears is protected against overload by means of a friction clutch.|The APK ring bending machines are equipped with two or three hardened drive rollers. The roll bending radius is set
by means of one or two precision, mechanically or hydraulically adjustable rollers. Two laterally mounted, mechanically
adjustable straightening shafts offer maximum rolling accuracy.|The APK models are equipped with a standard set of rollers for flat, square
and T-steel. Special roller sets for round and tubular steel,
section steel and angle steel as well as special straightening aids are available as special
accessories.|APK models can be installed vertically or horizontally as required.|Pipeline
construction - Tank
construction - Installers
- Steel
construction - Railing
construction - Locksmiths
- Forging
- Mechanical
engineering - Sheet
metal working - Car body construction
- Car
workshops - Training workshops|t - Standard castors - Hardened
special steel - Roller axles - Hardened
special steel - Straightening shafts - Hardened
special steel - Roller adjustment on top mechanical
- Straightening shaft adjustment mechanical
- Mobile operating column/Emergency
stop - Double foot pedal forward/reverse
- Operating instructions / CE|Round and tube
steel bending rollers - Form
steel bending rollers - Angle steel
bending rollers - Angle bending device
- Mobile control panel ER digital / emergency
stop - 2 feed speeds
enable precise rolling of bar materials such as flat, square, round, tubular and shaped steel.|The heart of the APK models is a powerful drive motor with a durable reduction gearbox. The forward and reverse thrust of the drive rollers takes place on a mobile control panel with double foot pedal. The roller transmission with quality bearings and specially
hardened gears is protected against overload by means of a friction clutch.|The APK ring bending machines are equipped with two or three hardened drive rollers. The roll bending radius is set
by means of one or two precision, mechanically or hydraulically adjustable rollers. Two laterally mounted, mechanically
adjustable straightening shafts offer maximum rolling accuracy.|The APK models are equipped with a standard set of rollers for flat, square
and T-steel. Special roller sets for round and tubular steel,
section steel and angle steel as well as special straightening aids are available as special
accessories.|APK models can be installed vertically or horizontally as required.|Pipeline
construction - Tank
construction - Installers
- Steel
construction - Railing
construction - Locksmiths
- Forging
- Mechanical
engineering - Sheet
metal working - Car body construction
- Car
workshops - Training workshops|t - Standard castors - Hardened
special steel - Roller axles - Hardened
special steel - Straightening shafts - Hardened
special steel - Roller adjustment on top mechanical
- Straightening shaft adjustment mechanical
- Mobile operating column/Emergency
stop - Double foot pedal forward/reverse
- Operating instructions / CE|Round and tube
steel bending rollers - Form
steel bending rollers - Angle steel
bending rollers - Angle bending device
- Mobile control panel ER digital / emergency
stop - 2 feed speeds
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-507086
SKU manufacturer:
83132
GTIN Code (EAN):
9004853831324
Weight:
400,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Bending performance data for steel: 60x10 mm, O 800 min. / yield strength 240 N/mm2
- Very powerful, drive motor 1,500 W
- Rapid forward / backward feed 4.3 m / min
- Adjustment roller O 155 mechanical
- Two drive rollers O 155 mm
- Directional shafts mechanical
- Solid cast iron frame
- Mobile control column with emergency stop
- Double foot pedal forward/backward thrust
- TB 125 Vario - klein ganz groß, Einfacher Biegradius oder ganzer Vollkreis - die APK-Ringbiegemaschinen
ermöglichen das präzise Einrollen von Stangenmaterialien wie Flach-, Vierkant-, Rund-, Rohr- und Formstahl. - Herz der APK-Modelle ist jeweils ein kräftiger Antriebsmotor mit langlebigem Untersetzungsgetriebe. Die Ansteuerung für Vor- und Rückschub der Antriebsrollen erfolgt an einem mobilen Bedienpult mit Doppel-Fußpedal. Das Rollengetriebe- mit Qualitätslagern und spezial-
gehärteten Zahnrädern - ist mittels Rutschkupplung vor Überlastung geschützt. - Die APK Ringbiegemaschinen sind mit zwei oder drei gehärteten Antriebsrollen ausgestattet. Die Einstellung des Rollbiegeradius
erfolgt über eine oder zwei mechanisch oder hydraulisch präzise verstellbare Einstellrollen. Zwei seitlich montierte, mechanisch
einstellbare Richtwellen bieten höchste Einrollgenauigkeit. - Die APK-Modelle sind mit einem Standardrollensatz für Flach-, Vierkant-
und T-Stahl ausgestattet. Spezialrollensätze für Rund- und Rohrstahl,
Formstahl und Winkelstahl sowie Spezialrichthilfen sind als Sonder-
zubehör erhältlich. - Alle APK-Modelle sind nach Bedarf vertikal oder horizontal aufstellbar.
- - Rohrleitungsbau
- Behälterbau
- Installateure
- Stahlbau
- Geländerbau
- Schlossereien
- Schmieden
- Maschinenbau
- Spenglereien
- Karosseriebau
- KFZ-Werkstätten
- Lehrwerkstätten - - Standardrollen - Spezialstahl gehärtet
- Rollenachsen - Spezialstahl gehärtet
- Richtwellen - Spezialstahl gehärtet
- Rollenverstellung oben mechanisch
- Richtwellenverstellung mechanisch
- Mobile Bediensäule/Not-Aus
- Doppel-Fußpedal Vor-/Rückschub
- Betriebsanleitung / CE - - Rund- und Rohrstahlbiegrollen
- Formstahlbiegrollen
- Winkelstahlbiegrollen
- Winkelbiegevorrichtung
- Mobiles Bedienpult ER digital / Not-Aus
- 2 Vorschubgeschwindigkeiten
Additional information
Axial diameter top (mm):
50mm
Axle diameter below (mm):
50mm
Drive motor (W):
1.500W
Drive rollers (no.):
2Anz.
Arrangement horizontal ():
Ja
Setup vertical ():
Ja
Width (mm):
830mm
Adjusting rollers hydraulic (number):
-Anz.
Adjustment rollers mechanical (number):
1Anz.
Height (mm):
1.350mm
Hydromotor adjustment roller (W):
-W
Length (mm):
730mm
Mains connection (V/Hz):
400 / 50-60V/Hz
Roll diameter top (mm):
155mm
Roller diameter at bottom (mm):
155mm
Feed rate (m/min):
4,3m/min
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
Hydraulic ring bending machine
83136
€17,358.32
-8%
Motorised ring bending machine
83130
€4,022.61
-9%
Manual beading machine
83171
€1,092.68
-8%
Hydraulic ring bending machine
83138
€24,579.41
-7%
Manual beading machine
83170
€819.50
-8%
Hydraulic ring bending machine
83139
€33,189.41
-8%
Hydraulic ring bending machine
83135
€11,860.34
-12%
Glass measuring rod Mod. KA 300/920
88817
€419.83
-16%
Motor-Abdeckhaube + Lüfterflügel
9010129
€26.18
-27%
Tastaturfolie ’Multi Line’
9105297
€7.10
€9.79 MSRP
-28%
Propan-Gasdruckregler-Set 700 mbar
9010150
€44.50
€62.01 MSRP
-16%
HF plug 10 pin
9505580
€55.13
-12%
Elektronik
9708850
€325.67
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-14%
Automatic condensate drain
11261
€198.95
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Motorised ring bending machine 83132
83132
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Bending performance data for steel: 60x10 mm, O 800 min. / yield strength 240 N/mm2
- Very powerful, drive motor 1,500 W
- Rapid forward / backward feed 4.3 m / min
- Adjustment roller O 155 mechanical
- Two drive rollers O 155 mm
- Directional shafts mechanical
- Solid cast iron frame
- Mobile control column with emergency stop
- Double foot pedal forward/backward thrust