zoom_in
zoom_out
fullscreen
-8%
ELMAG MARK adsorption dryer ADS 27 12108
Sku: T-500094
€5,532.52 (excl. legal VAT, excl. Shipping)
Product on backorder,
ready to ship within 14 days
ready to ship within 14 days
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-493999 | MARK adsorption dryer ADS 66 | 12112 | |
|
T-499919 | MARK adsorption dryer ADS 39 | 12110 | |
|
T-500629 | MARK adsorption dryer ADS 78 | 12113 | |
|
T-501093 | MARK adsorption dryer ADS 117 | 12115 | |
|
T-501211 | MARK adsorption dryer ADS 21 | 12107 | |
|
T-501914 | MARK adsorption dryer ADS 54 | 12111 | |
|
T-503090 | MARK adsorption dryer ADS 99 | 12114 | |
|
T-507991 | MARK adsorption dryer ADS 33 | 12109 |
doneAdsorptionstrockner
doneincl. fine filter ’C30’ and secondary filter
doneincl. fine filter ’C30’ and secondary filter
MARK adsorption dryer ADS 27 including fine filter ’C30’ and after-filter|ADS - Improving quality & productivity|How adsorption dryers work|> A compressor absorbs moisture from the intake air, which turns into condensation during compression. This leads to wear and corrosion on the downstream equipment, with potentially costly interruption of production and a reduction in the efficiency and service life of the equipment used.
Adsorption dryers provide a solution to prevent these negative effects.|>The MARKADS adsorption dryers eliminate water vapour that may condense in your compressed air system and cause damage. These dryers use an adsorbent material called a ’desiccant’ to absorb moisture and remove it from the compressed air (through regeneration phases). This method achieves a DTP of < 3°C (-40°C or -70°C). This value range should also be used when the ambient temperature drops below freezing to avoid the formation of ice in pipes and applications. The ADS range is typically used in the chemical, food and pharmaceutical industries and whenever a DTP adsorption of < 3°C is required< 3°C erforderlich ist.
Adsorption removes the residual moisture in the air that condenses even after a refrigeration dryer. The technology ’simulates’ a temperature drop to -40°C to -70°C by collecting and binding moisture in the desiccant medium (moisture freezes when the actual temperature falls by +3°C) and condenses the very last drop of water from the air. The moisture is removed from the airflow in the direction of your circulation and is released. Adsorption dryers are suitable for the most demanding applications, where there can be no moisture present.
Adsorption dryers provide a solution to prevent these negative effects.|>The MARKADS adsorption dryers eliminate water vapour that may condense in your compressed air system and cause damage. These dryers use an adsorbent material called a ’desiccant’ to absorb moisture and remove it from the compressed air (through regeneration phases). This method achieves a DTP of < 3°C (-40°C or -70°C). This value range should also be used when the ambient temperature drops below freezing to avoid the formation of ice in pipes and applications. The ADS range is typically used in the chemical, food and pharmaceutical industries and whenever a DTP adsorption of < 3°C is required< 3°C erforderlich ist.
Adsorption removes the residual moisture in the air that condenses even after a refrigeration dryer. The technology ’simulates’ a temperature drop to -40°C to -70°C by collecting and binding moisture in the desiccant medium (moisture freezes when the actual temperature falls by +3°C) and condenses the very last drop of water from the air. The moisture is removed from the airflow in the direction of your circulation and is released. Adsorption dryers are suitable for the most demanding applications, where there can be no moisture present.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-500094
SKU manufacturer:
12108
GTIN Code (EAN):
9004853121081
Weight:
78,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Applications for ADS dryers:
- Chemical and pharmaceutical industry
- Petrochemical industry
- Food industry
- Transport of hygroscopic materials
- Quality paint shops
- Textile production
- Semi-conductors
- Cable pressurisation
- Beer and beverage production
- Low temperature environment applications
- Whenever a pressure dew point of less than +3°C is required (-40°C or -70°C)
- TB 125 Vario - klein ganz groß, Ein Kompressor nimmt Feuchtigkeit aus der angesaugten Luft auf, die sich während der Komprimierung in Kondensat verwandelt. Dies führt zu Verschleiß und Korrosion an den nachgeschalteten Anlagen, mit potentiell kostspieliger Unterbrechung der Produktion und einer Verringerung der Effizienz und der Lebensdauer der eingesetzten Geräte.
Adsorptionstrockner bieten eine Lösung, um diese negativen Auswirkungen zu verhindern. - Die MARK Adsorptionstrockner ADS beseitigen Wasserdampf, der evtl. in Ihrem Druckluftsystem kondensiert und Schäden verursacht. Diese Trockner verwenden ein Adsorptionsmaterial, das „Trockenmittel“ genannt wird, um die Feuchtigkeit zu absorbieren und aus der Druckluft zu entfernen (durch Regenerationsphasen). Mit dieser Methode wird ein DTP von < 3°C (-40°C oder -70°C) erreicht. Dieser Wertebereich sollte auch verwendet werden, wenn die Umgebungstemperatur unter dem Gefrierpunkt sinkt, um die Bildung von Eis in Rohren und Anwendungen zu vermeiden. Die ADS-Palette wird in der Regel in der Chemie-, Lebensmittel- und pharmazeutischen Industrie verwendet und immer dann, wenn ein DTP von < 3°C erforderlich ist.
Adsorption entfernt die Restfeuchte in der Luft, die sogar nach einem Kältetrockner kondensiert. Die Technologie „simuliert“ eine Temperaturabsenkung auf -40°C bis -70°C durch die Sammlung und Bindung von Feuchtigkeit im Trockenmittelmedium (Feuchtigkeit gefriert bei Absenkung der Ist-Temperatur um +3°C) und kondensiert auch das letzte Wasser aus der Luft. Die Feuchtigkeit wird aus dem Luftstrom in Richtung zu Ihrem Kreislauf entfernt und abgegeben. Adsorptionstrockner sind für die anspruchsvollsten Anwendungen geeignet, bei denen gar keine Feuchtigkeit vorhanden sein darf.
Additional information
Dimensions (mm):
620x401x1285mm
C-Filter 0.01 µm 0.01 mg/m³ ():
C30
Effective delivery quantity (l/min):
2.700l/min
G-Filter 0.1 µm 0.1 mg/m³
(recommended option) ():
(recommended option) ():
G30
Air outlet (inches):
1Zoll
Max. operating pressure (bar):
14bar
Standard dew point (°C):
-40°C
S-Filter 1 µm ():
Ja
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
MARK ADS1 adsorption dryer
12100
€1,878.74
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-18%
Ball bearing (item 26)
9403379
€10.55
€12.90 MSRP
-28%
Screw cable lug 14/50 mm2
59635
€10.08
€13.91 MSRP
-22%
ELMAG START SET 6-piece
42091
€24.96
€32.02 MSRP
-19%
WIG-Schlauchpaket SRC ONE 26/4m - HF U/D (1DTPV)
15850
€183.82
€226.01 MSRP
-28%
Cast handwheel
9106013
€40.34
€56.01 MSRP
-12%
Elektronik
9708850
€325.67
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-12%
Glass measuring rod Mod. KA 300/920
88817
€419.83
-10%
Angle stop 0-180°
9601337
€45.67
-8%
Hydraulische Werkstattpresse 15 Tonnen - Tischmodell
81902
€580.92
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
-17%
Attachment glass - clear
54612
€2.39
€2.90 MSRP
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG MARK adsorption dryer ADS 27 12108
12108
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Applications for ADS dryers:
- Chemical and pharmaceutical industry
- Petrochemical industry
- Food industry
- Transport of hygroscopic materials
- Quality paint shops
- Textile production
- Semi-conductors
- Cable pressurisation
- Beer and beverage production
- Low temperature environment applications
- Whenever a pressure dew point of less than +3°C is required (-40°C or -70°C)