zoom_in
zoom_out
fullscreen
ELMAG Induction heater, movable HDi 11K400: 58223
Sku: T-495643
Discontinued item
doneInduktionsheizgeräte
doneincl. 4.25m induction hose package with lateral heating head ATTENTION: Device must not be transported lying down!!!
doneincl. 4.25m induction hose package with lateral heating head ATTENTION: Device must not be transported lying down!!!
Induction heater, movable HDi 11K400: incl. 4.25m induction hose package with side heating head
PLEASE NOTE: Device may not be transported in horizontal position!!!|HDi 11K400 & HDi 16K400|Applications:|Equipment|Our induction devices for heating ferrous materials are characterised by high performance and outstanding functions; they generate the heat directly inside the metal and reach red heat (up to about 1000°C) in a few seconds, without
changing the properties of the metal.
Since the heat is generated only at the point required, all the usual work of straightening, bending and replacement of pins and bearings can be carried out with it. Since the devices operate without an open flame, their operating costs are 50% lower than when using gas cylinders. They can also be used near
cables, hoses and other heat-sensitive parts.
ELMAG products have obtained all the required European certifications, including in the field of electromagnetic field emission. They are equipped with a special isolation transformer which guarantees the highest level of reliability even under the most adverse conditions or in the event of a short circuit.|- Removal of broken bolts, wheel suspensions, shock absorbers,
springs, cast components
- Straightening of shafts, tie rods, leaf springs, wishbones &
drive shafts, rigid axles, truck tie rods, components after
welding
- Loosening of seized axles, ball joints, nuts, bolts,
mufflers, lambda sensors, ABS sensors, wheel bolts, rusted
studs & stud bolts, hinges, insulation material;
Exhausts & brakes
- Bending & forming of sheet metal, rods, pipes
- Machining of brake lines
- Heating of pulleys
- Rust removal from castings
- Preheating during welding
- Soldering
- Strengthening and hardening
- Cold & hot straightening
- Tempering|Induction hose package 4.25m
Induction heating head for lateral heating
Mobile generator
User manual / CE
PLEASE NOTE: Device may not be transported in horizontal position!!!|HDi 11K400 & HDi 16K400|Applications:|Equipment|Our induction devices for heating ferrous materials are characterised by high performance and outstanding functions; they generate the heat directly inside the metal and reach red heat (up to about 1000°C) in a few seconds, without
changing the properties of the metal.
Since the heat is generated only at the point required, all the usual work of straightening, bending and replacement of pins and bearings can be carried out with it. Since the devices operate without an open flame, their operating costs are 50% lower than when using gas cylinders. They can also be used near
cables, hoses and other heat-sensitive parts.
ELMAG products have obtained all the required European certifications, including in the field of electromagnetic field emission. They are equipped with a special isolation transformer which guarantees the highest level of reliability even under the most adverse conditions or in the event of a short circuit.|- Removal of broken bolts, wheel suspensions, shock absorbers,
springs, cast components
- Straightening of shafts, tie rods, leaf springs, wishbones &
drive shafts, rigid axles, truck tie rods, components after
welding
- Loosening of seized axles, ball joints, nuts, bolts,
mufflers, lambda sensors, ABS sensors, wheel bolts, rusted
studs & stud bolts, hinges, insulation material;
Exhausts & brakes
- Bending & forming of sheet metal, rods, pipes
- Machining of brake lines
- Heating of pulleys
- Rust removal from castings
- Preheating during welding
- Soldering
- Strengthening and hardening
- Cold & hot straightening
- Tempering|Induction hose package 4.25m
Induction heating head for lateral heating
Mobile generator
User manual / CE
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-495643
SKU manufacturer:
58223
GTIN Code (EAN):
9004853582233
Weight:
135,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- ElmagInduktionsheizgerät, fahrbar HDi 11K400:, Elmag Hersteller-Nummer: 58223
- Induktionsheizgeräte, inkl. 4,25m Induktions-Schlauchpaket mit seitlichem AnwärmkopfACHTUNG: Gerät darf nicht liegend transportiert werden!!!
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-13%
Glass measuring rod Mod. KA 300/120
88801
€243.11
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-24%
Square shaft (no. 6)
9403041
€108.03
€142.00 MSRP
-8%
BOMAR metal bandsaw
78916
€17,657.98
-28%
ALUMINIUM fuse 400 A, L155xW43mm
9505217
€12.56
€17.48 MSRP
Attachment glass - clear
55381
€0.41
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
-12%
Elektronik
9708850
€325.67
-8%
T-reducing connector
11733
€11.97
-10%
Angle stop 0-180°
9601337
€45.67
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-12%
Core drill HSS, 13x30mm
61821
€28.53
-28%
Propan-Gasdruckregler-Set 700 mbar
9010150
€44.50
€62.01 MSRP
-16%
Seals for hydraulic cylinders
9709526
€56.30
€67.02 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Induction heater, movable HDi 11K400: 58223
58223
ELMAG Entwicklungs- und Handels GmbH
Welding Technology
- ElmagInduktionsheizgerät, fahrbar HDi 11K400:, Elmag Hersteller-Nummer: 58223
- Induktionsheizgeräte, inkl. 4,25m Induktions-Schlauchpaket mit seitlichem AnwärmkopfACHTUNG: Gerät darf nicht liegend transportiert werden!!!