zoom_in
zoom_out
fullscreen
ELMAG Fine filter including automatic arrester 12224
Sku: T-499136
In stock,ready for shipping within 24h
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-491668 | fine filter incl. autom. trap | 12222 | |
|
T-492751 | Fine filter incl. autom. trap | 12221 | |
|
T-500580 | Fine filter including automatic arrester | 12223 | |
|
T-507224 | Fine filter incl. autom. trap | 12220 | |
|
T-508075 | Fine filter including automatic arrester | 12225 |
doneFeinfilter Serie C
doneC48, 4,800 l/min., IG 1’
doneC48, 4,800 l/min., IG 1’
Fine filter including automatic arrester C48, 4,800 l/min., IG 1’|Fine filter - filter range C|How clean is your compressed air?|MARK filters keep your compressed air network in optimum shape!|High-performance coalescing filter.
Remove solid particles, water and oil aerosol.
Separation efficiency: 99.9%
For optimum filter performance, a Type G filter
should always be fitted upstream of a Type C filter.
Illustration with differential pressure gauge option|Atmospheric air naturally contains a variety of impurities such as dust, various hydrocarbons and water in the form of moisture. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream systems.
Quality treatment solutions remove these contaminants from the compressed air.|The installation of one or more filters is essential in every compressed air network. This results in a higher air quality that will benefit your entire compressed air network, including the downstream dryers, compressed air lines and pneumatic tools. It is advisable to treat the compressed air in different stages by using two or three filters.
With only a single filter, rapid saturation of the filter
could occur, which could lead to pressure loss, reduced air quality, or premature replacement of the filter elements.
Remove solid particles, water and oil aerosol.
Separation efficiency: 99.9%
For optimum filter performance, a Type G filter
should always be fitted upstream of a Type C filter.
Illustration with differential pressure gauge option|Atmospheric air naturally contains a variety of impurities such as dust, various hydrocarbons and water in the form of moisture. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream systems.
Quality treatment solutions remove these contaminants from the compressed air.|The installation of one or more filters is essential in every compressed air network. This results in a higher air quality that will benefit your entire compressed air network, including the downstream dryers, compressed air lines and pneumatic tools. It is advisable to treat the compressed air in different stages by using two or three filters.
With only a single filter, rapid saturation of the filter
could occur, which could lead to pressure loss, reduced air quality, or premature replacement of the filter elements.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-499136
SKU manufacturer:
12224
GTIN Code (EAN):
9004853122248
Weight:
2,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Optional equipment:
- Differential pressure gauge
- Differential pressure indicator
- Connection kit for easy series fitting of filters
- Wall fitting kit for simplified installation
- Connection kit for easy installation BEKOMAT - * Reference conditions: pressure 7 bar (102 psi), temperature 20 °C. Maximum operating temperature 66 °C, for series V: 35 °C. Minimum operating temperature 1 °C.
- TB 125 Vario - klein ganz groß, Hochleistungsfähige koaleszierende Filter.
Entfernen Feststoffpartikel, flüssiges Wasser und Öl-Aerosol.
Abscheidegrad: 99,9 %
Zur Erzielung einer optimalen Filterwirkung sollte einem Filter
des Typs C immer ein Filter des Typs G vorgeschaltet sein.
Abbildung mit Option Differenzdruckmanometer - Der Einbau eines oder mehrerer Filter ist in jedem Druckluftnetz unumgänglich. So wird eine höhere Luftqualität erreicht, die Ihrem gesamten Druckluftnetz, einschließlich der nachgeschalteten Trockner, Druckluftleitungen und Druckluftwerkzeuge zugute kommt. Es wird empfohlen, die Druckluft durch Verwendung von zwei oder drei Filtern in verschiedene Stufen aufzubereiten.
Bei nur einem einzelnen Filter könnte eine rasche Sättigung des Filters
auftreten, die zu Druckverlust, reduzierter Luftqualität oder einem vorzeitigen Austausch der Filterelemente führen könnte.
Additional information
Dimensions (mm):
A: 110 / B: 27,5 / C: 343mm
Thread connection inch:
1Zoll
Clearance for filter cartridge replacement (mm):
75mm
Maximum pressure (bar):
16bar
Nominal capacity (l/min):
4.800l/min
Type:
C48
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-8%
BOMAR metal bandsaw
78910
€10,246.72
-19%
WIG-Schlauchpaket SRC ONE 26/8m - HF U/D (1DTPV)
15851
€238.48
€292.98 MSRP
-6%
Bandsägeblatt BI-METALL cobalt M42
78525
€61.72
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-18%
Ball bearing (item 26)
9403379
€10.55
€12.90 MSRP
-12%
Elektronik
9708850
€325.67
-27%
Tastaturfolie ’Multi Line’
9105297
€7.10
€9.79 MSRP
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-13%
Glass measuring rod Mod. KA 500/420
88828
€380.29
-8%
BOMAR metal bandsaw
78933
€37,091.01
-24%
Square shaft (no. 6)
9403041
€108.03
€142.00 MSRP
-13%
Automatic longitudinal feed compl.
9802510
€711.30
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
Attachment glass - clear
55381
€0.41
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Fine filter including automatic arrester 12224
12224
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Optional equipment:
- Differential pressure gauge
- Differential pressure indicator
- Connection kit for easy series fitting of filters
- Wall fitting kit for simplified installation
- Connection kit for easy installation BEKOMAT - * Reference conditions: pressure 7 bar (102 psi), temperature 20 °C. Maximum operating temperature 66 °C, for series V: 35 °C. Minimum operating temperature 1 °C.