zoom_in
zoom_out
fullscreen
-8%
ELMAG Cylindrical grinding machine 82620
Sku: T-493814
€29,241.68 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
doneRundschleifmaschinen
doneModel CG 500incl. 2-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out.
doneModel CG 500incl. 2-axis position indicator ’SINO’Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out.
Cylindrical grinding machine Model CG 500
incl. 2-axis position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Precise grinding outside and insideThe|Wide range of applicationsThe|With SINO position indicatorThe|Simple operationThe|Standard features|Special accessories|cylindrical grinding machine CG 500 processes shafts and bores to an accuracy of 0.001 mm. Used for precision grinding of hardened surfaces, outer and inner bearing seats, mating, sliding and gliding surfaces. For the production of grinding surfaces on shafts, the turning spindle is lockable.|CG 500 cylindrical grinding machine enables the machining of shafts from diameter 8 mm to 200 mm and of bores from 13 mm to 100 mm. By turning the headstock or the grinding table, grinding angles up to 45-0-45 ° and conical curves up to 3 or 9° can be achieved. The grinding length of the automatic longitudinal feed is adjustable to a maximum of 500 mm and a minimum of 125 mm. Shorter grinding lengths must be carried out manually - but are just as precise and easy to achieve. The maximum permissible workpiece weight is 80 kg. Six speed levels provide sufficient scope for setting the perfect grinding speed. The longitudinal feed speed is adjustable between 0.05 and 2m/min.|machine is equipped with a SINO measuring and display system (accuracy 0.001 mm). The grinding wheel is therefore controlled and extremely precisely adjustable.|workpiece is clamped on a three-jaw chuck, on a driving plate or between centres. The tailstock can be locked hydraulically. Thin workpieces are supported by a fixed rest. The machine is equipped with a rapid traverse drive for the longitudinal and transverse axes and offers very simple operation in manual and automatic mode:
- Clamp
the workpiece - Set
the speed - Switch on
the spindle drive and grinding wheel motor - Switch on the coolant pump
- Set the grinding wheel on the workpiece
- Set
the grinding removal - Actuate the longitudinal feed manually using the handwheel or
- Set the longitudinal feed and switch on the automatic mode|CG 500 cylindrical grinding machine
- Digital position indicator SINO
- Grinding
wheel - Grinding wheel dresser
- Grinding wheel balancing shaft
- Internal cylindrical grinding tools O 18/10/6/5 mm
- Clamping rods for internal cylindrical grinding tools
- Morse taper MK 4
- Three-jaw chuck and chuck holder
- Steady
rest - Cooling lubrication system and hydraulic
unit - Halogen machine lamp
- Tool/operating instructions/CE|Grinding wheel set complete
incl. 2-axis position indicator ’SINO’ Ready for
operation: incl. oil filling, de-waxed (degreased), completely assembled and test run carried out|Precise grinding outside and insideThe|Wide range of applicationsThe|With SINO position indicatorThe|Simple operationThe|Standard features|Special accessories|cylindrical grinding machine CG 500 processes shafts and bores to an accuracy of 0.001 mm. Used for precision grinding of hardened surfaces, outer and inner bearing seats, mating, sliding and gliding surfaces. For the production of grinding surfaces on shafts, the turning spindle is lockable.|CG 500 cylindrical grinding machine enables the machining of shafts from diameter 8 mm to 200 mm and of bores from 13 mm to 100 mm. By turning the headstock or the grinding table, grinding angles up to 45-0-45 ° and conical curves up to 3 or 9° can be achieved. The grinding length of the automatic longitudinal feed is adjustable to a maximum of 500 mm and a minimum of 125 mm. Shorter grinding lengths must be carried out manually - but are just as precise and easy to achieve. The maximum permissible workpiece weight is 80 kg. Six speed levels provide sufficient scope for setting the perfect grinding speed. The longitudinal feed speed is adjustable between 0.05 and 2m/min.|machine is equipped with a SINO measuring and display system (accuracy 0.001 mm). The grinding wheel is therefore controlled and extremely precisely adjustable.|workpiece is clamped on a three-jaw chuck, on a driving plate or between centres. The tailstock can be locked hydraulically. Thin workpieces are supported by a fixed rest. The machine is equipped with a rapid traverse drive for the longitudinal and transverse axes and offers very simple operation in manual and automatic mode:
- Clamp
the workpiece - Set
the speed - Switch on
the spindle drive and grinding wheel motor - Switch on the coolant pump
- Set the grinding wheel on the workpiece
- Set
the grinding removal - Actuate the longitudinal feed manually using the handwheel or
- Set the longitudinal feed and switch on the automatic mode|CG 500 cylindrical grinding machine
- Digital position indicator SINO
- Grinding
wheel - Grinding wheel dresser
- Grinding wheel balancing shaft
- Internal cylindrical grinding tools O 18/10/6/5 mm
- Clamping rods for internal cylindrical grinding tools
- Morse taper MK 4
- Three-jaw chuck and chuck holder
- Steady
rest - Cooling lubrication system and hydraulic
unit - Halogen machine lamp
- Tool/operating instructions/CE|Grinding wheel set complete
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-493814
SKU manufacturer:
82620
GTIN Code (EAN):
9004853826207
Weight:
2800,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- ElmagRundschleifmaschine, Elmag Hersteller-Nummer: 82620
- Rundschleifmaschinen, Modell CG 500inkl. 2-Achs-Positionsanzeige ’SINO’Betriebsbereit: inkl. Ölfüllung, entkonserviert (entfettet), komplett montiert und Probelauf durchgef
- TB 125 Vario - klein ganz groß, Die Rundschleifmaschine CG 500 bearbeitet Wellen und Bohrungen auf 0,001 mm genau. Sie wird für das Präzisionsschleifen von gehärteten Oberflächen, äußeren und inneren Lagersitzen, Passungs-, Lauf- und Gleitflächen eingesetzt. Zur Herstellung von Schleifflächen an Wellen ist die Drehspindel absperrbar ausgeführt.
- Die CG 500 Rundschleifmaschine ermöglicht die Bearbeitung von Wellen ab Durchmesser 8 mm bis 200 mm und von Bohrungen ab 13 mm bis 100 mm. Durch Drehung des Spindelstocks bzw. des Schleiftisches sind Schleifwinkel bis 45-0-45° bzw. konische Verläufe bis 3 bzw. 9° erzielbar. Die Schleiflänge des automatischen Längsvorschubs ist maximal auf 500 mm und minimal auf 125 mm einstellbar. Kürzere Schleiflängen müssen - genau so präzise und einfach - manuell gefahren werden. Das maximal zulässige Werkstückgewicht beträgt 80 kg. Sechs Drehzahlstufen bieten ausreichend Spielraum zur Einstellung einer optimalen Schleifgeschwindigkeit. Die Längsvorschub-Geschwindigkeit ist zwischen 0,05 bis 2m/min einstellbar.
- Die Maschine ist mit einem SINO Mess- und Anzeigesystem ausgestattet (Genauigkeit 0,001 mm). Die Schleifscheibe ist daher kontrolliert und äußerst präzise zustellbar.
- Die Werkstückspannung erfolgt an einem Dreibackenfutter, an einer Mitnehmerscheibe oder zwischen Spitzen. Der Reitstock ist hydraulisch schließbar. Dünne Werkstücke werden durch eine Sehlünette unterstützt. Die Maschine ist mit einem Eilgangsantrieb für die Längs- und Querachse ausgestattet und bietet im Manuell- und Automatikbetrieb eine sehr einfache Bedienung:
- Werkstück spannen
- Drehzahl einstellen
- Spindelantrieb und Schleifscheibenmotor einschalten
- Kühlmittelpumpe einschalten
- Schleifscheibe an das Werkstück anstellen
- Schleifabtrag einstellen
- Längsvorschub manuell mittels Handrad betätigen oder
- Längsvorschub einstellen und Automatikbetrieb einschalten - - CG 500 Rundschleifmaschine
- Digitale Positionsanzeige SINO
- Schleifscheibe
- Schleifscheiben-Abziehvorrichtung (Dresser)
- Schleifscheiben-Auswuchtwelle
- Innenrundschleifwerkzeuge ø 18/10/6/5 mm
- Spannstangen für Innenrundschleifwerkzeuge
- Morsekonus MK 4
- Dreibackenfutter und Futteraufnahme
- Stehlünette
- Kühlschmiersystem und Hydraulikaggregat
- Halogen-Maschinenlampe
- Werkzeug/Betriebsanleitung/CE - - Schleifscheiben-Set komplett
Additional information
Width (mm):
1.600mm
Rotary spindle drive Gear stages (no.):
2Anz.
Spindle speeds Stage 1 (UpM):
60/85/230UpM
Spindle speeds Stage 2 (UpM):
120/170/460UpM
Height (mm):
1.500mm
Hydraulic system Operating pressure (mPa):
0,9-1,1mPa
Internal circular grinding tool Max. speed (UpM):
20.000UpM
Internal circular grinding tool max. (mm):
40x32x6mm
Internal circular grinding tool min. (mm):
10x10x3mm
V-belt drive stages (no.):
3Anz.
Coolant pump delivery rate (l/min):
16l/min
Length (mm):
2.500mm
Longitudinal feed speed max. / min. (m/min):
2 / 0,05m/min
Mains connection (V/Hz):
400/50-60V/Hz
Saddle pin span (mm):
25mm
Grinding diameter outside max. / min. (mm):
200/8mm
Grinding diameter inside max. / min. (mm):
100/13mm
Grinding length outside max. / min. (mm):
500/125mm
Grinding wheel width (mm):
50mm
Grinding wheel spindle speed (UpM):
1.670UpM
Grinding disc-Ø outside max. / min. (mm):
400/280mm
Grinding wheel rotational speed (m/s):
35/25,4m/s
Grinding disc-Ø internal (mm):
203mm
Grinder motor speed (50 Hz) (UpM):
3.000UpM
Grinder motor power (W):
4.000W
Grindstone rotation angle (°):
180°
Grinding stock Cross rapid traverse (mm/min):
200mm/min
Cross slide handwheel rotation (mm/U):
1mm/U
Grinding stock crosswise per correction line (mm):
0,00125mm
Grinding stock Cross per scale part stroke (mm):
0,005mm
Grinding stock cross quick measurement (mm):
25mm
Grinding table angle clockwise/counter-clockwise (°):
3/9°
Grinding table longitudinal feed max. (mm):
600mm
Lubrication system operating pressure (mPa):
0,1-0,15mPa
Jaw chuck diameter (mm):
160mm
Tensile diameter outside/inside (mm):
8-60 / 10-90mm
Spindle reception / Tailstock Morse cone ():
MK 4
Spindle motor speed 1/2 (50 Hz) (UpM):
750/1.500UpM
Spindle motor power speed 1/2 (W):
450/750W
Spindle housing upper part Rotation angle (°):
45-0-45°
Peak width (mm):
500mm
Workpiece weight max.:
80kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-28%
Grinding belt support no. 65
9820120
€14.45
€20.00 MSRP
-28%
Screw cable lug 14/50 mm2
59635
€10.08
€13.91 MSRP
-8%
Hydraulische Werkstattpresse 15 Tonnen - Tischmodell
81902
€580.92
GI seal no. 12
9302075
€2.14
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-8%
BOMAR metal bandsaw
78916
€17,657.98
-8%
BOMAR metal bandsaw
78933
€37,091.01
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-12%
Glass measuring rod Mod. KA 300/270
88804
€272.18
-16%
Motor-Abdeckhaube + Lüfterflügel
9010129
€26.18
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
-12%
HM-Halter Fix verschraubt
9706241
€197.77
-12%
Elektronik
9708850
€325.67
-12%
Core drill HSS, 13x30mm
61821
€28.53
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Cylindrical grinding machine 82620
82620
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- ElmagRundschleifmaschine, Elmag Hersteller-Nummer: 82620
- Rundschleifmaschinen, Modell CG 500inkl. 2-Achs-Positionsanzeige ’SINO’Betriebsbereit: inkl. Ölfüllung, entkonserviert (entfettet), komplett montiert und Probelauf durchgef