zoom_in
zoom_out
fullscreen
ELMAG Compressor EUROAIR 10212
Sku: T-498400
Discontinued item
doneEUROAIR 230 Volt
done400/10/50 W
done400/10/50 W
Compressor EUROAIR 400/10/50 W|First-class professional entry-level model|Intake capacity|Piston compressor technology|Oil-lubricated or oil-free compression?|Applications|EUROAIR 310, 330, 400 and 410 air compressors from ELMAG are outstanding entry-level models in the professional class. Their excellent value for money also makes them suitable for the discerning home improvement enthusiast.
These powerful units with AC or three-phase motor, V-belt drive, cast cylinder, precision high-performance piston, large fan wheel and post-cooling system made of die-cast aluminium (EUROAIR 400 and 410 only) provide sufficient compressed air even for extended delivery of power. For smaller painting jobs, too, sufficient reserves of compressed air are always available.
The low engine speeds of ONLY 930 to max. 1,450 rpm provide a high duty cycle, long life and smooth operation.
Great performance - low price: EUROAIR!|The intake capacity is calculated from the cylinder volume and the speed of the compressor.
Crucial in the selection of a compressor, however, is the effective delivery quantity.|A piston compressor consists of one or more cylinders with pistons driven by a motor. The air is sucked into the cylinder and compressed in one or more steps to the operating pressure. After compression, the compressed air flows through the aftercooler to the compressed air tank.|The cylinders, pistons and cranks of an oil-lubricated compressor are lubricated with oil that circulates in the compressor. The compressed air of an oil-lubricated piston compressor contains some residual oil, usually 10-15 mg/m3. Most versions of oil-free piston compressors have permanently lubricated bearings. The pistons have grease-free piston rings, usually made of Teflon or carbon fibre. Replacement of bearings and piston rings is usually required more frequently with this type of compressor than with oil-lubricated versions. However, the compressed air is free of oil residues.|Piston compressors are particularly suitable for lower compressed air
requirements: single-stage compressors for pressures up to approx. 8-10 bar,
multi-stage versions can deliver up to 30 bar.
They should only be used temporarily. The capacity utilisation of an
air-cooled piston compressor may not exceed 60%. After compressing for
2 minutes, the compressor must rest for at least 1.5 minutes.
The total compression time per day should be limited to a maximum of
approx. 4 hours.
These powerful units with AC or three-phase motor, V-belt drive, cast cylinder, precision high-performance piston, large fan wheel and post-cooling system made of die-cast aluminium (EUROAIR 400 and 410 only) provide sufficient compressed air even for extended delivery of power. For smaller painting jobs, too, sufficient reserves of compressed air are always available.
The low engine speeds of ONLY 930 to max. 1,450 rpm provide a high duty cycle, long life and smooth operation.
Great performance - low price: EUROAIR!|The intake capacity is calculated from the cylinder volume and the speed of the compressor.
Crucial in the selection of a compressor, however, is the effective delivery quantity.|A piston compressor consists of one or more cylinders with pistons driven by a motor. The air is sucked into the cylinder and compressed in one or more steps to the operating pressure. After compression, the compressed air flows through the aftercooler to the compressed air tank.|The cylinders, pistons and cranks of an oil-lubricated compressor are lubricated with oil that circulates in the compressor. The compressed air of an oil-lubricated piston compressor contains some residual oil, usually 10-15 mg/m3. Most versions of oil-free piston compressors have permanently lubricated bearings. The pistons have grease-free piston rings, usually made of Teflon or carbon fibre. Replacement of bearings and piston rings is usually required more frequently with this type of compressor than with oil-lubricated versions. However, the compressed air is free of oil residues.|Piston compressors are particularly suitable for lower compressed air
requirements: single-stage compressors for pressures up to approx. 8-10 bar,
multi-stage versions can deliver up to 30 bar.
They should only be used temporarily. The capacity utilisation of an
air-cooled piston compressor may not exceed 60%. After compressing for
2 minutes, the compressor must rest for at least 1.5 minutes.
The total compression time per day should be limited to a maximum of
approx. 4 hours.
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-498400
SKU manufacturer:
10212
GTIN Code (EAN):
9004853102127
Weight:
58,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Plug-and-play’ - equipped with two quick-connect couplings
- CONDOR pressure switch for automatic on/off operation
- Motor-protective circuit-breaker
- Tank and system pressure gauges
- Filter pressure reducer model FR 1/4’
- Safety valve
- Non-return valve
- Ball valve for condensate drain
- TB 125 Vario - klein ganz groß, EUROAIR 310, 330, 400 und 410 Druckluftkompressoren von ELMAG sind vorzügliche Einsteigermodelle der Profi-Klasse. Durch ihr hervorragendes Preis-/Leistungsverhältnis sind sie auch für den anspruchsvollen Heimwerker geeignet.
Diese kraftvollen Geräte mit Wechsel- oder Drehstrommotor, Keilriemenantrieb, Gusszylinder, Präzisions-Hochleistungskolben, großem Lüfterad und Nachkühlung aus Aluminium-Druckguss (nur EUROAIR 400 und 410) liefern auch für längere Powereinsätze ausreichend Druckluft. Auch für kleinere Lackierarbeiten sind stets ausreichend Druckluftreserven vorhanden.
Die geringen Aggregat-Drehzahlen von NUR 930 bis max. 1.450 UpM sorgen für hohe Einschaltdauer, lange Lebensdauer und Laufruhe.
Große Leistung - kleiner Preis: EUROAIR! - Die Ansaugleistung wird aus dem Zylindervolumen und der Drehzahl des Verdichters errechnet.
Entscheidend für die Auswahl eines Druckluftkompressors ist jedoch die effektive Liefermenge. - Ein Kolbenkompressor besteht aus einem oder mehreren Zylindern mit Kolben, angetrieben von einem Motor. Die Luft wird in den Zylinder gesaugt und in einem oder mehreren Schritten auf den Betriebsdruck verdichtet. Nach dem Verdichten strömt die Druckluft durch den Nachkühler zum Druckluftbehälter.
- Kolbenkompressoren eignen sich vor allem für einen geringeren
Druckluftbedarf: einstufige Kompressoren für Drücke bis ca. 8-10 bar,
mehrstufige Ausführungen können bis zu 30 bar liefern.
Die Nutzung sollte nur zeitweilig erfolgen. Die Auslastung eines
luftgekühlten Kolbenkompressors darf 60 % nicht überschreiten. Nach 2
Minuten verdichten muss der Kompressor mindestens 1,5 Minuten ruhen.
Die gesamte Verdichtungszeit pro Tag sollte auf höchstens ca. 4 Stunden
beschränkt bleiben.
Additional information
Intake performance (l/min):
380l/min
Container volume:
50l
Width (cm):
42cm
Compressor speed (UpM):
930UpM
Effective delivery quantity (l/min):
220l/min
Electrical connection Voltage / Frequency ():
230 V / 50 Hz
Height (cm):
84cm
Length:
86cm
Delivery quantity according to VDMA 4362, measured at 80% of the maximum pressure ():
Ja
Max. operating pressure (bar):
10bar
Engine rated power ():
2,2 kW / 3 PS
Oil-lubricated ():
Ja
Sound pressure level (4 m) (dB(A)):
73dB(A)
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
Attachment glass - clear
55381
€0.41
-12%
Glass measuring rod Mod. KA 300/920
88817
€419.83
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-22%
ELMAG START SET 6-piece
42091
€24.96
€32.02 MSRP
-27%
Cylinder head gasket bottom no. 15
9100456
€8.07
€11.09 MSRP
-30%
Collet set MK 4 / M16
82782
€252.43
€361.00 MSRP
-8%
BOMAR metal bandsaw
78916
€17,657.98
-8%
BOMAR metal bandsaw
78933
€37,091.01
-14%
Automatic condensate drain
11261
€198.95
-12%
Core drill HSS, 13x30mm
61821
€28.53
-27%
Tastaturfolie ’Multi Line’
9105297
€7.10
€9.79 MSRP
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
-19%
WIG-Schlauchpaket SRC ONE 26/4m - HF U/D (1DTPV)
15850
€183.82
€226.01 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Compressor EUROAIR 10212
10212
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Plug-and-play’ - equipped with two quick-connect couplings
- CONDOR pressure switch for automatic on/off operation
- Motor-protective circuit-breaker
- Tank and system pressure gauges
- Filter pressure reducer model FR 1/4’
- Safety valve
- Non-return valve
- Ball valve for condensate drain