zoom_in
zoom_out
fullscreen
-25%
ELMAG CA pistol grinder 44800
Sku: T-497367
€113.87 (excl. legal VAT, excl. Shipping)
€152.01 MSRP
In stock,ready for shipping within 24h
Piece
doneDruckluft-Pistolenschleifer
doneEPS 435, Roloc 50mm
doneEPS 435, Roloc 50mm
CA pistol grinder EPS 435, Roloc O 50mm|ELMAG EPS|EPS technology|EPS safety|Maintenance and operation|Compressed air hose length|The cutting-edge EPS models are highly ergonomic high-tech products for trade, commerce and industry, but also for private workshops and garages.|Developed in the technical laboratory under realistic conditions, EPS compressed air tools are characterised by their outstanding technical perfection.
Tight manufacturing tolerances, self-centring, precision ground air motors and high-precision quality bearings from leading brand manufacturers ensure smoother running, optimised air consumption and maximum product performance.|Compressed air tools are the safest power tools. They are generally much safer than electric power tools and are also more ergonomic. Without an electric motor, a more manageable and user-friendly design is possible and there is no danger from electricity or explosions, which is a significant advantage. In addition, compressed air tools are safe to use even in wet environments.|Made for continuous loads under the toughest conditions, CA tools require minimal care. Provided that clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and damage to the air motor and components. Compressed air prepared by a refrigerant dryer and filter.
And another thing - compressed air must be oiled! The easiest way is to use maintenance units, automatic oilers or inline oilers. It is also advisable to add a few drops of ELMAG oil directly into the air connection opening before and after each working day or before longer work breaks.|The longer the compressed air hose, the lower the available operating pressure. For a 10 metre long compressed air hose with an internal diameter of 10 millimetres, the pressure loss is about 1.4 bar.
The operating pressure must therefore be set correspondingly higher on the compressor using the pressure regulator.
Selection advice
We recommend limiting the hose length to a maximum of 10 metres and choosing an internal hose diameter of 10 millimetres.
Tight manufacturing tolerances, self-centring, precision ground air motors and high-precision quality bearings from leading brand manufacturers ensure smoother running, optimised air consumption and maximum product performance.|Compressed air tools are the safest power tools. They are generally much safer than electric power tools and are also more ergonomic. Without an electric motor, a more manageable and user-friendly design is possible and there is no danger from electricity or explosions, which is a significant advantage. In addition, compressed air tools are safe to use even in wet environments.|Made for continuous loads under the toughest conditions, CA tools require minimal care. Provided that clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and damage to the air motor and components. Compressed air prepared by a refrigerant dryer and filter.
And another thing - compressed air must be oiled! The easiest way is to use maintenance units, automatic oilers or inline oilers. It is also advisable to add a few drops of ELMAG oil directly into the air connection opening before and after each working day or before longer work breaks.|The longer the compressed air hose, the lower the available operating pressure. For a 10 metre long compressed air hose with an internal diameter of 10 millimetres, the pressure loss is about 1.4 bar.
The operating pressure must therefore be set correspondingly higher on the compressor using the pressure regulator.
Selection advice
We recommend limiting the hose length to a maximum of 10 metres and choosing an internal hose diameter of 10 millimetres.
Content:
1 Piece
Shipping:
€41.93 Versandservice to United Kingdom
plus €9.90 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-497367
SKU manufacturer:
44800
GTIN Code (EAN):
9004853448003
Weight:
0,70 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Small, light and compact
- Grinding with limited space available
- For standard grinding wheels and grinding fleece O 50 mm (optimal O 75 mm)
- Power/speed control
- Small dust turbulence due to exhaust air backwards
- TB 125 Vario - klein ganz groß, Die topaktuellen EPS-Modelle sind hoch ergonomische Hightech-Produkte für Handwerk, Gewerbe und Industrie, aber auch für private Werkstätten und Garagen.
- Im Techniklabor unter realen Praxisbedingungen entwickelt, zeichnen sich die EPS-Druckluftwerkzeuge durch herausragende technische Perfektion aus.
Enge Fertigungstoleranzen, selbstzentrierende, präzisionsgeschliffene Luftmotoren und hochpräzise Qualitätslager von führenden Markenherstellern, sorgen für verbesserte Laufruhe, einen optimierten Luftverbrauch und höchste Produktleistung. - Druckluftwerkzeuge sind die sichersten Werkzeuge mit Antrieb. Sie bieten generell deutlich mehr Sicherheit als Elektrowerkzeuge und sind zudem auch ergonomischer als diese. Ohne Elektromotor ist eine handlichere und anwenderfreundlichere Bauform möglich und - was besonders von Vorteil ist - es besteht keine Strom- oder Explosionsgefahr. Außerdem sind Druckluftwerkzeuge auch in nasser Umgebung gefahrlos einsetzbar.
- Für Dauerbelastung unter härtesten Bedingungen gebaute DL-Werkzeuge brauchen ein Minimum an Pflege. Vorausgesetzt es wird saubere und trockene (kondensatfreie) Druckluft als Antriebmedium verwendet. Wasserrückstände verursachen Korrosion und dadurch Schäden am Luftmotor und Bauteilen. Optimal ist eine durch Kältetrockner und Filter aufbereitete Druckluft.
Übrigens - Druckluft muss geölt werden! Die Verwendung von Wartungseinheiten, automatischen Ölern oder Inlineölern ist am einfachsten. Ratsam ist, zusätzlich vor und nach jedem Arbeitstag bzw. vor längeren Arbeitspausen einige Tropfen ELMAG Öleröl direkt in die Luftanschlussöffnung zu geben. - Je länger der Druckluftschlauch, umso geringer ist der verfügbare Betriebsdruck. Bei einem 10 Meter langen Druckluftschlauch mit einem Innendurchmesser von 10 Millimeter beträgt der Druckverlust ca. 1,4 bar.
Der Betriebsdruck muss deshalb am Kompressor mittels des Druckreglers entsprechend höher eingestellt werden.
Auswahlempfehlung
Wir empfehlen, die Schlauchlänge auf maximal 10 Meter zu beschränken und einen Schlauch-Innendurchmesser von 10 Millimeter zu wählen.
Additional information
Operating pressure (bar):
6,3bar
Speed (rpm):
16.000U/min
Length (mm):
145mm
Air connection (inch):
1/4Zoll
Air requirement [l/min] (l/min.):
64l/min
Sound pressure level (1 m) (dB(A)):
83dB(A)
Spindle nose receptacle (inches):
1/4-20TZoll
Grinding table diameter (mm):
Roloc 50mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
CA orbital grinder 150 mm
43849
€257.06
€342.98 MSRP
-24%
CA power jigsaw
44762
€222.18
€293.99 MSRP
-24%
CA belt grinder 10x330mm
43880
€172.23
€226.01 MSRP
-23%
CA long-handle angle grinder 100 mm
43804
€215.21
€280.00 MSRP
-24%
CA orbital grinder EPS 470
44750
€286.13
€376.01 MSRP
-24%
CA power jigsaw
44760
€201.26
€265.00 MSRP
-24%
CA belt grinder 20x520 mm
43881
€205.92
€270.00 MSRP
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
-22%
ELMAG START SET 6-piece
42091
€24.96
€32.02 MSRP
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-10%
Angle stop 0-180°
9601337
€45.67
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
-13%
Glass measuring rod Mod. KA 300/120
88801
€243.11
GI seal no. 12
9302075
€2.14
-28%
Screw cable lug 14/50 mm2
59635
€10.08
€13.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG CA pistol grinder 44800
44800
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Small, light and compact
- Grinding with limited space available
- For standard grinding wheels and grinding fleece O 50 mm (optimal O 75 mm)
- Power/speed control
- Small dust turbulence due to exhaust air backwards