zoom_in
zoom_out
fullscreen
-25%
ELMAG CA orbital grinder 150 mm 43849
Sku: T-508120
€257.06 (excl. legal VAT, excl. Shipping)
€342.98 MSRP
In stock,ready for shipping within 24h
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-499918 | CA orbital grinder 150 mm | 43850 |
doneDruckluft-Exzenterschleifer EPS
doneEPS 443 ’oil-free’
doneEPS 443 ’oil-free’
CA orbital grinder 150 mm EPS 443 ’oil-free|ELMAG EPS|EPS technology|EPS safety|Maintenance and operation|Compressed air hose length|The cutting-edge EPS models are highly ergonomic high-tech products for trade, commerce and industry, but also for private workshops and garages.|Developed in the technical laboratory under realistic conditions, EPS compressed air tools are characterised by their outstanding technical perfection.
Tight manufacturing tolerances, self-centring, precision ground air motors and high-precision quality bearings from leading brand manufacturers ensure smoother running, optimised air consumption and maximum product performance.|Compressed air tools are the safest power tools. They are generally much safer than electric power tools and are also more ergonomic. Without an electric motor, a more manageable and user-friendly design is possible and there is no danger from electricity or explosions, which is a significant advantage. In addition, compressed air tools are safe to use even in wet environments.|Made for continuous loads under the toughest conditions, CA tools require minimal care. Provided that clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and damage to the air motor and components. Compressed air prepared by a refrigerant dryer and filter.
And another thing - compressed air must be oiled! The easiest way is to use maintenance units, automatic oilers or inline oilers. It is also advisable to add a few drops of ELMAG oil directly into the air connection opening before and after each working day or before longer work breaks.|The longer the compressed air hose, the lower the available operating pressure. For a 10 metre long compressed air hose with an internal diameter of 10 millimetres, the pressure loss is about 1.4 bar.
The operating pressure must therefore be set correspondingly higher on the compressor using the pressure regulator.
Selection advice
We recommend limiting the hose length to a maximum of 10 metres and choosing an internal hose diameter of 10 millimetres.
Tight manufacturing tolerances, self-centring, precision ground air motors and high-precision quality bearings from leading brand manufacturers ensure smoother running, optimised air consumption and maximum product performance.|Compressed air tools are the safest power tools. They are generally much safer than electric power tools and are also more ergonomic. Without an electric motor, a more manageable and user-friendly design is possible and there is no danger from electricity or explosions, which is a significant advantage. In addition, compressed air tools are safe to use even in wet environments.|Made for continuous loads under the toughest conditions, CA tools require minimal care. Provided that clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and damage to the air motor and components. Compressed air prepared by a refrigerant dryer and filter.
And another thing - compressed air must be oiled! The easiest way is to use maintenance units, automatic oilers or inline oilers. It is also advisable to add a few drops of ELMAG oil directly into the air connection opening before and after each working day or before longer work breaks.|The longer the compressed air hose, the lower the available operating pressure. For a 10 metre long compressed air hose with an internal diameter of 10 millimetres, the pressure loss is about 1.4 bar.
The operating pressure must therefore be set correspondingly higher on the compressor using the pressure regulator.
Selection advice
We recommend limiting the hose length to a maximum of 10 metres and choosing an internal hose diameter of 10 millimetres.
Content:
1 Piece
Shipping:
€73.87 Versandservice to United Kingdom
plus €9.90 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-508120
SKU manufacturer:
43849
GTIN Code (EAN):
9004853438493
Weight:
1,25 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Infinitely variable speed control
- Universally applicable for wood and metal
- Ergonomic, non-slip composite handle
- Safety switch with automatic stop
- Sanding disc O 150 mm with 6-fold perforation
- Quick sanding sheet change due to velcro attachment
- Connection for external dust extraction
- Low overall height, only 85 mm
- Suitable for operation with oil-free compressed air
- TB 125 Vario - klein ganz groß, Die topaktuellen EPS-Modelle sind hoch ergonomische Hightech-Produkte für Handwerk, Gewerbe und Industrie, aber auch für private Werkstätten und Garagen.
- Im Techniklabor unter realen Praxisbedingungen entwickelt, zeichnen sich die EPS-Druckluftwerkzeuge durch herausragende technische Perfektion aus.
Enge Fertigungstoleranzen, selbstzentrierende, präzisionsgeschliffene Luftmotoren und hochpräzise Qualitätslager von führenden Markenherstellern, sorgen für verbesserte Laufruhe, einen optimierten Luftverbrauch und höchste Produktleistung. - Druckluftwerkzeuge sind die sichersten Werkzeuge mit Antrieb. Sie bieten generell deutlich mehr Sicherheit als Elektrowerkzeuge und sind zudem auch ergonomischer als diese. Ohne Elektromotor ist eine handlichere und anwenderfreundlichere Bauform möglich und - was besonders von Vorteil ist - es besteht keine Strom- oder Explosionsgefahr. Außerdem sind Druckluftwerkzeuge auch in nasser Umgebung gefahrlos einsetzbar.
- Für Dauerbelastung unter härtesten Bedingungen gebaute DL-Werkzeuge brauchen ein Minimum an Pflege. Vorausgesetzt es wird saubere und trockene (kondensatfreie) Druckluft als Antriebmedium verwendet. Wasserrückstände verursachen Korrosion und dadurch Schäden am Luftmotor und Bauteilen. Optimal ist eine durch Kältetrockner und Filter aufbereitete Druckluft.
Übrigens - Druckluft muss geölt werden! Die Verwendung von Wartungseinheiten, automatischen Ölern oder Inlineölern ist am einfachsten. Ratsam ist, zusätzlich vor und nach jedem Arbeitstag bzw. vor längeren Arbeitspausen einige Tropfen ELMAG Öleröl direkt in die Luftanschlussöffnung zu geben. - Je länger der Druckluftschlauch, umso geringer ist der verfügbare Betriebsdruck. Bei einem 10 Meter langen Druckluftschlauch mit einem Innendurchmesser von 10 Millimeter beträgt der Druckverlust ca. 1,4 bar.
Der Betriebsdruck muss deshalb am Kompressor mittels des Druckreglers entsprechend höher eingestellt werden.
Auswahlempfehlung
Wir empfehlen, die Schlauchlänge auf maximal 10 Meter zu beschränken und einen Schlauch-Innendurchmesser von 10 Millimeter zu wählen.
Additional information
Operating pressure (bar):
6,3bar
Speed (rpm):
12.000U/min
Hubhöhe (mm):
5mm
Length (mm):
189mm
Air connection (inch):
1/4Zoll
Air requirement [l/min] (l/min.):
170l/min
Sound pressure level (1 m) (dB(A)):
74dB(A)
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
CA power jigsaw
44762
€222.18
€293.99 MSRP
-24%
CA belt grinder 10x330mm
43880
€172.23
€226.01 MSRP
-23%
CA long-handle angle grinder 100 mm
43804
€215.21
€280.00 MSRP
-24%
CA orbital grinder EPS 470
44750
€286.13
€376.01 MSRP
-24%
CA power jigsaw
44760
€201.26
€265.00 MSRP
-25%
CA pistol grinder
44800
€113.87
€152.01 MSRP
-24%
CA belt grinder 20x520 mm
43881
€205.92
€270.00 MSRP
-29%
CONDOR pressure switch
11920
€39.16
€55.00 MSRP
-13%
Glass measuring rod Mod. KA 500/420
88828
€380.29
-22%
ELMAG START SET 6-piece
42091
€24.96
€32.02 MSRP
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-8%
Hydraulische Werkstattpresse 15 Tonnen - Tischmodell
81902
€580.92
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
-14%
Automatic condensate drain
11261
€198.95
-8%
T-reducing connector
11733
€11.97
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG CA orbital grinder 150 mm 43849
43849
ELMAG Entwicklungs- und Handels GmbH
Compressed Air Technology
- Infinitely variable speed control
- Universally applicable for wood and metal
- Ergonomic, non-slip composite handle
- Safety switch with automatic stop
- Sanding disc O 150 mm with 6-fold perforation
- Quick sanding sheet change due to velcro attachment
- Connection for external dust extraction
- Low overall height, only 85 mm
- Suitable for operation with oil-free compressed air