zoom_in
zoom_out
fullscreen
ELMAG Automatic welding helmet, “EAGLE” design 56383
Sku: T-495063
Discontinued item
doneAutomatik-Schweißschirme
doneELMAG MultiSafeVario, DIN 4/9-13, 2XL incl. 3 pcs. Outer cover glass & 1 pc. Inner cover pane and color cardboard packaging
doneELMAG MultiSafeVario, DIN 4/9-13, 2XL incl. 3 pcs. Outer cover glass & 1 pc. Inner cover pane and color cardboard packaging
Automatic welding helmet, “EAGLE” design ELMAG MultiSafeVario, DIN 4/9-13, 2XL
including 3 pcs. outside glass overlays
& 1 pc. inside glass overlay, and
coloured cardboard packaging|Welder protection of the highest standard|All welding helmets with excellent visibility in normal light|Extremely fast dimming|Variably adjustable protection level DIN 9 - 13|MultiSafeVario® welding helmets provide reliable protection for the eyes and face against arc radiation and offer perfect shielding of the head and neck against metal splashes, welding and grinding sparks.|The bright level of the field of view allows a complete welding process with the helmet closed. From preparation and ignition of the electrode through to weld inspection, electrode replacement and material handling, the visor can remain down. There is no accidental ‘flashing’ - e.g. when tack welding.|When the arc is ignited, the field of view of the MultiSafeVario® welding helmet darkens fully automatically in a very short time. The welding process can be observed without dazzling.|The protection level (degree of darkening for optimum visibility, depending on the welding process and/or arc strength) and the response (sensitivity) of the field of view can be adjusted continuously at any time by means of controls on the inside of the helmet - one hand remains free for the welding torch.
including 3 pcs. outside glass overlays
& 1 pc. inside glass overlay, and
coloured cardboard packaging|Welder protection of the highest standard|All welding helmets with excellent visibility in normal light|Extremely fast dimming|Variably adjustable protection level DIN 9 - 13|MultiSafeVario® welding helmets provide reliable protection for the eyes and face against arc radiation and offer perfect shielding of the head and neck against metal splashes, welding and grinding sparks.|The bright level of the field of view allows a complete welding process with the helmet closed. From preparation and ignition of the electrode through to weld inspection, electrode replacement and material handling, the visor can remain down. There is no accidental ‘flashing’ - e.g. when tack welding.|When the arc is ignited, the field of view of the MultiSafeVario® welding helmet darkens fully automatically in a very short time. The welding process can be observed without dazzling.|The protection level (degree of darkening for optimum visibility, depending on the welding process and/or arc strength) and the response (sensitivity) of the field of view can be adjusted continuously at any time by means of controls on the inside of the helmet - one hand remains free for the welding torch.
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-495063
SKU manufacturer:
56383
GTIN Code (EAN):
9004853563836
Weight:
0,90 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Comfortable, easily adjustable headband with locking mechanism
- Head band and forehead sweatband can be replaced
- Adjustable visor angle and height
- With up & down mechanism for optimising the centre of gravity when opening/closing the visor. The welding helmet always sits lightly on your head.
- For MMA electrode welding, MIG/MAG & TIG inert gas welding, plasma cutting and grinding.
- Automatic cassette DIN EN 4/9-13 with permanently effective ultraviolet and infrared filters for shielding against harmful radiation, protection level DIN 16
- Automatic on and off mechanism with four or two light-sensitive sensors for arc detection
- Solar cells for power supply. 2XL modes are also equipped with two back-up batteries.
- Large LCD screen 98 x 55 or 98 x 43 mm with liquid crystal screen: On arc ignition, the liquid crystals are specially arranged. Depending on the level of protection, the visual display shows a brighter or darker image.
- Adjustable brightening delay: Time from extinguishing of the arc to view with normal light. Protects against glare from the afterglow of the weld. Can be set on the automatic cassette.
- 2XL models are equipped with a test switch.
- Permanent, automatic protection of the welder
- Both hands free for setup and welding work
- High welding quality with continuous observation
- Time saving and greater productivity
- MultiSafeVario® welding shields can be used for welding and grinding work. For grinding without automatic dimming, the protection level bright DIN 4 can be set permanently.
- FREE! 3 pcs. outer glass overlays, 1 pc. inner glass overlay
- TB 125 Vario - klein ganz groß, MultiSafeVario®-Schweißschirme schützen verlässlich die Augen und das Gesicht vor Lichtbogenstrahlung und bieten eine perfekte Abschirmung des Kopfes und des Halses vor Metallspritzern, Schweiß- und Schleiffunken.
- Die Hellstufe des Sichtfeldes ermöglicht einen durchgehenden Schweißprozess mit geschlossenem Helm. Vom Ansetzen und Zünden der Elektrode bis zur Schweißnahtprüfung, beim Elektrodenwechsel und
Materialhandling kann das Visier unten bleiben. Ein zufälliges 'Verblitzen' - z.B. beim Heften - ist ausgeschlossen. - Bei Lichtbogenzündung wird das Sichtfeld der MultiSafeVario®-
Schweißschirme innerhalb kürzester Zeit vollautomatisch abgedunkelt. Der Schweißvorgang ist blendungsfrei beobachtbar. - Die Schutzstufe (Verdunkelungsgrad für optimale Sicht, je nach Schweißverfahren bzw. Lichtbogenstärke) und das Ansprechverhalten (Empfindlichkeit) des Sichtfeldes sind jederzeit stufenlos mittels Reglern an der Helmaußenseite einstellbar - eine Hand bleibt frei für den Schweißbrenner.
Additional information
Brightening delay short/medium/long ():
Ja
Brightening time short/medium/long (s):
0,3 ~ 0,9s
Back-up battery ():
Ja
Operating temperature (°C):
-5 bis +55°C
Switch-on time at 22 °C:
0,00005s
Weight (g):
470g
Helmet material Polyamide/Nylon ():
Ja
Infrared protection IR permanent ():
DIN 16
Cassette size b x h x d (mm):
115x125x18mm
Classification according to EN 379 ():
1/1/1/2
Storage temperature (°C):
-20 bis +70°C
Light sensors ():
4
Mode switch Welding/Grinding ():
Ja
Protection class setting Sensitivity ():
stufenlos
Protection mode setting DIN EN 4/9-13 ():
stufenlos
Protection class dimmed min. ():
DIN 9
Protection class dimmed max. ():
DIN 13
Protection level bright ():
DIN 4
Field of view size b x h (mm):
98 x 55mm
Solar technology ():
Ja
Power supply:
Solarzellen
Test switch ():
Ja
Ultraviolet protection UV permanent ():
DIN 16
Fully automatic ():
Ja
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-23%
Inside glass overlay, 107x68x0.8 mm
58397
€1.39
€1.81 MSRP
-13%
Outside glass overlay, 123x99x1.2 mm
56373
€1.64
-6%
Bandsägeblatt BI-METALL cobalt M42
78525
€61.72
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-17%
Sheet metal protection bracket no. 81
9802315
€4.83
€5.80 MSRP
-19%
WIG-Schlauchpaket SRC ONE 26/4m - HF U/D (1DTPV)
15850
€183.82
€226.01 MSRP
-8%
BOMAR metal bandsaw
78916
€17,657.98
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-8%
T-reducing connector
11733
€11.97
-24%
Needle holder for 19 pcs. 3mm needles
44830
€30.88
€40.50 MSRP
-16%
Seals for hydraulic cylinders
9709526
€56.30
€67.02 MSRP
Attachment glass - clear
55381
€0.41
-18%
Outer flange for QUEEN 180,200,230
9601228
€5.34
€6.51 MSRP
-13%
Glass measuring rod Mod. KA 500/170
88823
€334.96
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Automatic welding helmet, “EAGLE” design 56383
56383
ELMAG Entwicklungs- und Handels GmbH
Welding Technology
- Comfortable, easily adjustable headband with locking mechanism
- Head band and forehead sweatband can be replaced
- Adjustable visor angle and height
- With up & down mechanism for optimising the centre of gravity when opening/closing the visor. The welding helmet always sits lightly on your head.
- For MMA electrode welding, MIG/MAG & TIG inert gas welding, plasma cutting and grinding.
- Automatic cassette DIN EN 4/9-13 with permanently effective ultraviolet and infrared filters for shielding against harmful radiation, protection level DIN 16
- Automatic on and off mechanism with four or two light-sensitive sensors for arc detection
- Solar cells for power supply. 2XL modes are also equipped with two back-up batteries.
- Large LCD screen 98 x 55 or 98 x 43 mm with liquid crystal screen: On arc ignition, the liquid crystals are specially arranged. Depending on the level of protection, the visual display shows a brighter or darker image.
- Adjustable brightening delay: Time from extinguishing of the arc to view with normal light. Protects against glare from the afterglow of the weld. Can be set on the automatic cassette.
- 2XL models are equipped with a test switch.
- Permanent, automatic protection of the welder
- Both hands free for setup and welding work
- High welding quality with continuous observation
- Time saving and greater productivity
- MultiSafeVario® welding shields can be used for welding and grinding work. For grinding without automatic dimming, the protection level bright DIN 4 can be set permanently.
- FREE! 3 pcs. outer glass overlays, 1 pc. inner glass overlay