WEICON Main Catalogue Chemical and technical products Page 87
Commercial customer offer**Top sellers from Weicon
Breakaway strength N/m (Thread*) Prevailing strength N/m (Thread*) 0.20 30 - 40 45 - 60 AN 301-48 Retaining cylindrical assemblies, drinking water and DVGW2 approval high strength, medium viscosity green M 20 R ¾“ 450 650 nt 0.15 25 - 30 40 - 55 AN 306-01 Retaining cylindrical assemblies high strength, low viscosity green M 12 125 nt 0.10 25 - 30 50 - 60 AN 306-03 Retaining cylindrical assemblies high strength, low viscosity green M 12 125 nt 0.10 25 - 30 50 - 60 high strength, medium viscosity green M 20 R ¾“ 700 1,000 nt 0.15 Retaining cylindrical assemblies, drinking water and DVGW2 approval, BAM3 high strength, higher viscosity green M 56 R 2“ 3,000 6,000 nt 0.20 Retaining cylindrical assemblies for passive materials, BAM3 high strength, higher viscosity green M 36 3,000 6,000 mt 0.20 Retaining cylindrical assemblies, drinking water approval high strength, medium viscosity green M 36 2,500 mt Retaining cylindrical assemblies high strength, medium viscosity green M 20 R 3/4“ Retaining cylindrical assemblies medium strength, medium viscosity yellow Retaining cylindrical assemblies, drinking water approval, BAM3 high strength, medium viscosity AN 306-10 www.klebstoffe.com Nach IVK-Empfehlung geprüft durch: Hygiene-Institut des Ruhrgebiets AN 306-20 www.klebstoffe.com Nach IVK-Empfehlung geprüft durch: Hygiene-Institut des Ruhrgebiets AN 306-30 www.klebstoffe.com Retaining cylindrical assemblies for passive materials, drinking water approval 28 - 36 40 - 55 35 - 45 50 - 70 25 - 35*2 0.20 35 - 45 50 - 70 600 nt 0.15 20 - 30 30 - 40 M 20 R 3/4“ 550 nt 0.12 12 - 15 17 - 22 green M 20 R 3/4“ 550 nt 0.15 30 - 35 55 - 70 high strength, high viscosity silver M 56 R2“ 150,000 900,000 ht 0.50 35 - 45 10 - 20 Hygiene-Institut des Ruhrgebiets www.klebstoffe.com 55 - 70 30 - 35*2 15 - 20*2 Nach IVK-Empfehlung geprüft durch: AN 306-38 30 - 35 15 - 20*2 20 - 25 approx. 5 2-4 -60°C to +150°C (-76°F to +302°F) 25- 30 2-6 2-4 -60°C to +175°C (-76°F to +347°F) 10 - 20 2-4 -60°C to +150°C (-76°F to +302°F) 10 - 20 2-4 -60°C to +150°C (-76°F to +302°F) (2,900 - 3,625 psi) (3,625 - 4,350 psi) 17 - 22 (2,466 - 3,190) 15 - 18 (2,175 - 2,610 psi) 25 - 35 (3,625 - 5,075 psi) 15 - 25 (2,175 - 3,625 psi) 2-5 2-4 5 - 10*2 6 - 12*2 20 - 40 approx. 24 -60°C to +200°C (-76°F to +392°F) -60°C to +200°C (-76°F to +392°F) 2-5 2-4 5 - 10*2 6 - 12*2 approx. 5 1-3 -60°C to +150°C (-76°F to +302°F) approx. 240 approx. 24 -60°C to +200°C (-76°F to +392°F) 10 - 20 3-6 -60°C to +150°C (-76°F to +302°F) approx. 5 2-4 -60°C to +175°C (-76°F to +347°F) 15 - 30 3-6 -60°C to +150°C (-76°F to +302°F) 2-6 10 - 20 24 -60°C to +150°C (-76°F to +302°F) 5-7 15 - 30 6 - 12 -60°C to +200°C (-76°F to +392°F) 15 - 30 6 - 12 -60°C to +200°C (-76°F to +392°F) 10 - 20 3-6 -60°C to +200°C (-76°F to +392°F) 120 - 240 24 - 72 -50°C to +175°C (-58°F to +347°F) 20 - 40 5 - 10 -60°C to +150°C (-76°F to +302°F) 20 - 40 approx. 12 -60°C to +150°C (-76°F to +302°F) 15 - 30 approx. 12 -60°C to +180°C (-76°F to +356°F) 20 - 30 (2,900 - 4,350 psi) 25 - 30 (3,625 - 4,350 psi) Adhesives / Sealants Gap filling capacity in mm max. 2,000 3,000 mt Temperature resistance Viscosity in mPa,s at +25°C (+77°F) Brookfield M 36 Final strength at room temperature (hours) For threaded joints up to green Handling strength at room temp. (minute) Colour high strength, medium viscosity Shearstrength** N/mm² (DIN 54452) Features Retaining cylindrical assemblies, drinking water approval Application AN 301-38 Type-No. -60°C to +200°C (-76°F to +392°F) Nach IVK-Empfehlung geprüft durch: AN 306-40 AN 306-41 AN 306-48 www.klebstoffe.com 15 - 30 (2,175 - 4,350 psi) 8 - 12 (1,160 - 1,740 psi) 25 - 35 (3,625 - 5,075 psi) Technical Sprays Hygiene-Institut des Ruhrgebiets Nach IVK-Empfehlung geprüft durch: Assembly of cylindrical parts AN 301-65 Pipe and flange sealing (with PTFE), drinking water approval medium strength, high viscosity white M 80 R 3‘‘ 180,000 300,000 0.50 4-8 1-3 AN 301-72 Pipe and flange sealing (with PTFE), drin- medium strength, king water and DVGW2 approval high viscosity white M 80 R 3‘‘ 15,000 60,000 ht 0.30 5 - 10 4-6 AN 305-10 AN 305-18 AN 305-67 AN 305-72 Flange sealing, AGA*4-approval, BAM3 high strength, high viscosity orange --- 70,000 300,000 ht 0.50 18 - 25 15 - 25 Flange sealing high strength, high viscosity red --- 80,000 500,000 ht 0.50 12 - 18 18 - 24 Pipe and flange sealing (with PTFE) low strength, high viscosity white M 80 R 3“ 170,000 410,000 0.60 3-5 2-4 medium strength, high viscosity white M 80 R 3“ 17,000 50,000 ht 0.40 7 - 10 2-4 Flange sealing low strength, high viscosity light green --- 17,000 50,000 ht 0.30 6 - 10 2-5 Flange sealing high strength, high viscosity orange --- 30,000 100,000 ht 0.50 16 - 24 5 - 10 Pipe and flange sealing (with PTFE), drinking water, DVGW² AGA*4-approval www.klebstoffe.com 25 - 30 (3,625 - 4,350 psi) (290 - 870 psi) (725 - 1,015 psi) 5 - 10 (725 - 1,450 psi) 8 - 13 (1,160 - 1,885 psi) 6-8 (1,160 - 1,740 psi) 4-6 (580 - 870 psi) Assembly Pastes AN 306-60 Technical Liquids Hygiene-Institut des Ruhrgebiets Nach IVK-Empfehlung geprüft durch: Hygiene-Institut des Ruhrgebiets 2 3 4 DVGW Certificate for use in gas supply and hot water systems BAM tested and safety-related evaluated- according to leaflet M 034-1 “List of nonmetallic materials compatible with oxygen” (DGUV information 213-075) of BG RCI AustralianGasAssociation - Approval - Gas Class II 500 kPA Lubricants *Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d *2Strength measured on V4A stainless steel screws **Static shear strength based on cylindrical parts of abt. Ø 13 mm, tolerance (D-d) = 0.05 mm, l/d = 0.88 5 - 10 (725 - 1,450 psi) We do not recommend WEICONLOCK for long-term use on connections of copper and its alloys if exposed to water of more than +40°C (+104°F). All recommendations and technical data are based on laboratory tests and extensive experiences by users. They have been compiled with greatest care but we take no warranty of any kind and accept no liability for the results obtained. * nt = low thixotrope mt = medium thixotrope ht = high thixotrope WEICON TOOLS® AN 305-74 4-6 (580 - 870 psi) Other AN 305-73 Catalogue WEICON 87
244 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.