WEICON Main Catalogue Chemical and technical products Page 198
Commercial customer offer**Top sellers from Weicon
Adhesives / Sealants Technical Data AL-T AL-M AL-W AL-H AL-F Silicone Grease Silicone Grease HV Abbreviation (DIN 51502): KPL 2 R -20 KF 2 K –20 KPL 1-2 E -25 KPHC 1P -40 KLF 2K -30 MSI2 S-50 MSI3S-40 Consistency assignment (DIN 51818): NLGI-class 2 NLGI-class 2 NLGI-class 1-2 NLGI-class 1 NLGI-class 2 NLGI-class 2-3 NLGI-class 3 Mineral oil Mineral oil Mineral oil Polyalphaolefin Mineral oil Silicone oil Silicone oil Aluminium complex soap Li/Ca soap/MoS2 Spec. calcium soap Aluminium complex soap Lithium Gel Gel darkbrown black beige white white colourless translucent translucent Welding load 2.400 N 3.400 N 3.400 N 3.600 N 3.400 N --- --- Goods load 2.200 N 3.200 N 3.200 N 3.400 N 3.200 N --- --- Spherical cap value (1 Min / 1000 N) 2,0 mm 0,5 mm 0,7 mm 0,6 mm 0,8 mm --- --- Speed identifying value (ka . n . dm): 200.000 400.000 450.000 400.000 350.000 --- --- Worked penetration (DIN ISO 2137): 265-295 1/10 mm 265-295 1/10 mm 285-315 1/10 mm 310-340 1/10 mm 265-295 1/10 mm 240-270 1/10 mm 240-270 1/10 mm 0 - 90 1 - 90 0 - 40 1 - 90 1 - 90 1-90 1-90 -25°C to +190°C (-13 to +374°F) -20°C to +120°C (-4 to +248°F) -25°C to +80°C (-13 to +176°F) -40°C to +160°C (-40 to +320°F) -30°C to +120°C (-22 to +248°F) -50°C to +200°C (-58 to +392°F) -40°C to +200°C (-40 to +392°F) >200 °C (+392 °F) Base oil: Base thickener: Technical Sprays Colour: VKA Test (DIN 51 350): Water resistance (DIN 51807): Technical Liquids Temperature resistance: Drop point (IP 396): >210°C (+410°F) >170°C (+338°F) >100°C (+212°F) >200°C (+392°F) >190°C (+374°F) >200 °C (+392 °F) +40°C (+104°F) 230 mm²/s 160 mm²/s 100 mm²/s 400 mm²/s 100 mm²/s 75 mm²/s 2400 mm²/s +100°C (+212°F) 15 mm²/s 15 mm²/s 9 mm²/s 40 mm²/s 9 mm²/s 31 mm²/s 1000 mm²/s --- --- no corrosion --- --- --- --- 0/0 0/0 1/2 1/2 Base oil viscosity (DIN 51 562): Salt spray test with separated protective coats (Federal German Armed Forces Regulations 336 h/35°C, 5% NaCl): EMCOR test (DIN 51 802 distilled water): Assembly Pastes EMCOR test (DIN 51 802 3% NaCl solution): Density at +20°C (+68°F) (DIN 51757): 0,94 g/cm³ Conforms to: ./. 0/0 0,92 g/cm³ 0,94 g/cm³ 0,93 g/cm³ 0,90 g/cm³ 0,98 g/cm³ >1,00 g/cm³ ./. Federal German Armed Forces TL 9150-0066, NATO specification G-460 NSF-H 1 NSF-H 2 NSF-H 1 NSF-H 1 1.490 J/(g·K) 1.766 J/(g·K) 1.762 J/(g·K) 1.838 J/(g·K) 1.832 J/(g·K) 1.295 J/(g·K) 1.295 J/(g·K) 0,372 W/m·K 0,491 W/m·K 0,494 W/m·K 0,394 W/m·K 0,524 W/m·K 0,445 W/m·K 0,445 W/m·K 11,0 kV/mm 11,5 kV/mm 9,5 kV/mm 29,6 kV/mm 7,8 kV/mm 9,2 kV/mm 9,2 kV/mm 24 24 24 24 24 24 24 AL-T AL-M AL-W AL-H AL-F Silicone Grease Rolling bearings • • • • • Sliding bearings • • • • • Heat capacity: Thermal conductivity (ISO 22007-4): +20 °C (+68 °F) Dielectric strength (DIN EN 60243-1): Shelf life at least (months)*: Lubricants 0/0 0/0 WEICON TOOLS® Type selection table Other Chains • Joints • • • • • • • Levers • • • • • • • • • • • • • Sliding guides • Linear guide systems • Spindles • • • Spline shafts • • • • • • • Camshafts • Springs • Open gears • • • Worm gears • • • Cables 198 Silicone Grease HV Catalogue WEICON • • • • • •
244 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.