WEICON Main Catalogue Chemical and technical products Page 140
Commercial customer offer**Top sellers from Weicon
Adhesives / Sealants Technical Data Zinc Spray bright grade Zinc-Alu Spray Galva Spray slightly weathered hot-dip galvanization fresh hot-dip galvanization fresh hot-dip galvanization fresh hot-dip galvanization charcoal-grey / DB 703 silver-grey / DB 701 indoors and outdoors indoors and outdoors indoors and outdoors indoors and outdoors indoors and outdoors indoors and outdoors styrenated alkyd resin modified alkyd resin acrylic resin acrylic resin alkyd resin alkyd resin flaky zinc and aluminium pigments flaky zinc and aluminium pigments zinc and aluminium pigments zinc and aluminium pigments lamellar hematite lamellar hematite approx. 99.9 Zn / approx. 99.9% Al approx. 99.9 Zn / approx. 99.5% Al approx. 99.5% Al / approx. 94.0% Zn approx. 99.5% Al / approx. 94.0% Zn > 90% ferric oxide > 90% ferric oxide approx. 70% approx. 70% approx. 51% approx. 51% approx. 58% approx. 58% 400 ml 400 ml 400 ml 400 ml 400 ml 400 ml Specific Weight g/cm³: 1.1 - 1.3 1.0 - 1.2 0.90 - 1.0 0.90 - 1.0 1.3 - 1.4 1.3 - 1.4 Recommended primer: not necessary Zinc Spray Zinc Spray Zinc Spray not necessary not necessary Colour: Technical Sprays Application: Binding agent: Pigment: Pigment purity: Technical Liquids Percentage of metal in dry film: Assembly Pastes Content: from +5°C (+41°F) to from +5°C (+41°F) to from +5°C (+41°F) to from +5°C (+41°F) to from +5°C (+41°F) to from +5°C (+41°F) to +35°C (+95°F), optimum +35°C (+95°F), optimum +35°C (+95°F), optimum +35°C (+95°F), optimum +35°C (+95°F), optimum +35°C (+95°F), optimum processing temperature processing temperature processing temperature processing temperature processing temperature processing temperature from +18°C (+64°F) to from +18°C (+64°F) to from +18°C (+64°F) to from +18°C (+64°F) to from +18°C (+64°F) to from +18°C (+64°F) to +25°C (+77°F) +25°C (+77°F) +25°C (+77°F) +25°C (+77°F) +25°C (+77°F) +25°C (+77°F) 2 Lubricants Processing temperature* : Consumption at 1.5 cross coats*3: approx. 150 ml/m² approx. 150 ml/m² approx. 150 ml/m² approx. 150 ml/m² approx. 160 ml/m² approx. 160 ml/m² Layer thickness at 1.5 cross coats*3: approx. 30 - 50 μm approx. 20 - 40 µm approx. 20 - 40 µm approx. 20 - 40 µm approx. 60 - 80 μm approx. 160 ml/m² Dust dry approx. 15 minutes approx. 15 minutes approx. 15 minutes approx. 15 minutes approx. 30 minutes approx. 30 minutes Hardened 10-12 hours 10-12 hours 10-12 hours 10-12 hours approx. 24 hours approx. 24 hours Painted over approx. 24 hours approx. 24 hours approx. 12 hours approx. 12 hours approx. 24 hours approx. 24 hours abrasion-resistant abrasion-resistant abrasion-resistant abrasion-resistant abrasion-resistant abrasion-resistant Drying time*3: Abrasion-resistant: WEICON TOOLS® Cross cutting DIN 53151 / ISO 2409: >1,050 hours >550 hours >450 hours >450 hours --- --- Mandrel bend test DIN EN ISO 1519: no hair cracking no hair cracking no hair cracking no hair cracking no hair cracking no hair cracking not required not required not required not required not required not required from -50°C (-58°F) to +500°C (+932°F) from -50°C (-58°F) to +300°C (+572°F) from -50°C (-58°F) to +300°C (+572°F) from -50°C (-58°F) to +300°C (+572°F) from -50°C (-58°F) to +300°C (+572°F) from -50°C (-58°F) to +300°C (+572°F) 24 months 24 months 24 months 24 months 24 months 24 months Temperature resistance after complete curing: Other cross cut characteristic cross cut characteristic cross cut characteristic cross cut characteristic cross cut characteristic cross cut characteristic value GT 0 value GT 0 to GT 1 value GT 0 to GT 1 value GT 0 to GT 1 value GT 0 to GT 1 value GT 0 to GT 1 Salt spraying test DIN EN ISO 9227 Top coating: Shelf life*5: *² When processing at temperatures below +10°C (+50°F), heat spray cans to room temperature +20°C (+68°F). *3 Temperature of spray can and the surface of +20°C (+68°F) and 50% relative humidity. 140 Rust Protection Rust Protection 2000 PLUS 2000 PLUS charcoal-grey silver-grey Zinc Spray Catalogue WEICON
244 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.