WEICON Main Catalogue Chemical and technical products Page 124
Commercial customer offer**Top sellers from Weicon
Adhesives / Sealants Technical Data WEICON Adhesives and Sealants in non-cured condition Silicone A Silicone LP* Silicone N Silicone F HT 300 Black-Seal 1-C Polysiloxane (acetate) 1-C Polysiloxane (acetate) 1-C Polysiloxane (pentanonoxime) 1-C Polysiloxane (pentanonoxime) 1-C Polysiloxane (acetate) 1-C Polysiloxane (acetate) Density (g/cm³): 1.03 1.00 1.17 1.00 1.18 1.04 Viscosity: pasty pasty pasty 30.000 mPa.s pasty pasty 1 1 1 liquid 1 >1 +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) by humidity by humidity by humidity by humidity by humidity by humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity Technical Sprays Base: Stability/Run-off (ASTM D 2202) mm: Processing temperature: Technical Liquids Cure type: Curing condition: Skin-over time (minutes):*³ 15 10 7 15 8 7 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours < -6 % < -6 % < -6 % -9 % < -6 % < -6 % Gap filling up to max. mm: 5 5 5 2 5 5 Gap width up to max. mm: 25 25 25 --- 25 25 Shelf life in months: 15 12 12 12 12 12 Cure speed:*³ Assembly Pastes Volume change (DIN 52451) %:*³ (at constant room temperature) WEICON TOOLS® Lubricants WEICON Adhesives and Sealants in cured condition Shore-A-Hardness (DIN 53505 / ASTM D 2240): 20 25 20 10 30 37 Elongation at break ISO 37, S3A [%] 700 80 550 600 300 470 Tensile strength ISO 37, S3A [N/mm²] 1.4 N/mm² (200 psi) 2,9 N/mm² (420 psi) 1.5 N/mm² (220 psi) 1.8 N/mm² (260 psi) 2.5 N/mm² (360 psi) 2.2 N/mm² (320 psi) Tension strength value at 100 % nach ISO 37, S3A 0.3 N/mm² (40 psi) 0,6 N/mm² (90 psi) 0.4 N/mm² (60 psi) 0.2 N/mm² (30 psi) 0.9 N/mm² (130 psi) 0.7 N/mm² (100 psi) Movement capacity max. %: 25 25 25 / 15 15 Fungicide: yes no yes no no no -40°C to +180°C (-40 to +356°F) -40°C to +180°C (-40 to +356°F) -40°C to +180°C (-40 to +356°F) -50°C to +180°C (-58 to +356°F) -40°C to +280°C (-40 to +536°F) briefly (approx. 2 h) +300°C (+572°F) -40°C to +280°C (-40 to +536°F) briefly (approx. 2 h) +300°C (+572°F) cannot be painted cannot be painted cannot be painted cannot be painted cannot be painted cannot be painted B2 B2 B2 B2 B2 B2 Temperature resistance: Paintable: Building material category (DIN 4102): Other *² For easier processing, the cartridges should be heated to room temperature (+20°/+68°F) before use at low temperatures. *³ Normal climate +23°C (+73°F) and 50% relative humidity in accordance with DIN 50014. 124 Catalogue WEICON * Nonfood Compounds Program Listed S2 Registration 158659
244 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.