WEICON Main Catalogue Chemical and technical products Page 123
Commercial customer offer**Top sellers from Weicon
Elastic Adhesives and Sealants Adhesives / Sealants Technical Data WEICON Adhesives and Sealants in non-cured condition Flex+bond® 1 C.Polyoxypropylener 1-K MS-Polymer Base: 1 C.-MS-Polymer 1 C.-MS-Polymer Colour: white, grey, black white, grey black 310 ml 290 ml 310 ml, 200 ml Content/Container: white, black Speed-Flex® Flex 310 M® Flex 310 M® Speed-Flex® Flex 310 PU Fast-Bond Hybrid Crystal F1X transparent 85 ml silane-modified One-component One-component 1 C.-MS-Polymer 1 C.-MS-Polymer 1 C.-MS-Polymer polymer polyurethane polyurethane grey white, grey, black transparent white, grey, black beige grey 310 ml 310 ml 310 ml 300 ml 310 ml 280 ml Density g/cm³: 1.44 1.62 1.44 g/cm³ 1.44 1.06 1.5 1.60 1.06 1.17 1.50 1.53 Viscosity: pasty pasty pasty pasty pasty pasty extremely pasty pasty pasty pasty pasty 1 <1 1 1 <1 ≤3 <1 <1 1 >1 <1 Stability/Run-off (ASTM D 2202) mm: Processing temperature: +5°C to +40°C*² +5°C to +40°C*² +5°C to +40°C*² (+41 to +104°F) (+41 to +104°F) (+41 to +104°F) +5°C to +40°C*² (+41 to +104°F) by humidity by humidity by humidity by humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity, Aqua-Flex also hardens under water +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5 to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity Skin-over time (minutes):*³ 25 10 25 Cure speed:*³ 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours Volume change (DIN EN ISO 10563) %:*³ -1 -2 -1 -1 Gap filling up to max. mm: 5 10 5 Gap width up to max. mm: 25 30 25 12 12 12 Cure type: Curing condition: Shelf life in months: (at constant room temperature) +5 °C to +40 °C*² +5°C to +40°C*² +5°C to +40°C*² +5°C to +40°C*² +5°C to +40°C*² +5°C to +40°C*² (+41 to +104 °F) (+41 to +104°F) (+41 to +104°F) (+41 to +104°F) (+41 to +104°F) (+41 to +104°F) by humidity by humidity by humidity by humidity by humidity +5°C to +35°C +5°C to +35°C +5°C to +40°C +5°C to +40°C (+41 +5°C to +40°C (+41 to +104°F) and (+41 to (+41 to +95°F) and to +104°F) and (+41 to +104°F) 30% to 95% rel. +95°F) and 40% to 40% to 70% rel. 30% to 95% rel. and 30% to 95% humidity 70% rel. humidity humidity rel. humidity humidity by humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity 10 10 10 45 3 10 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours -3 - -1 -3 -6 Increase -2 5 5 5 5 5 5 10 10 25 25 40 5 25 25 - 30 12 12 12 12 12 18 25 10 2-3 mm in the first 24 hours 12 Technical Sprays Windscreen Adhesive Technical Liquids Solar-Flex® Assembly Pastes Aqua-Flex 42 42 40 32 58 40 45 - 56 ±3 600 650 650 300 500 230 300 450 - 121 Tensile strength of the pure adhesive/sealant (DIN EN ISO 527 / 5A): 3.3 N/mm² (480 psi) 1.9 N/mm² (280 psi) 3.3 N/mm² (480 psi) 3.3 N/mm² (480 psi) 3.0 N/mm² (435 psi) 1.3 N/mm² (189 psi) 2.2 N/mm² (320 psi) 3.0 N/mm² (435 psi) 2.0 N/mm² (290 psi) 10 N/mm² (1,450 psi) 1.6 N/mm² (232 psi) Average tensile shear strength (DIN EN 1465):*4 2.1 N/mm² (300 psi) 1.5 N/mm² (250 psi) 2.1 N/mm² (300 psi) 2.1 N/mm² (300 psi) 2.0 N/mm² (290 psi) 1.4 N/mm² (203 psi) 1.3 N/mm² (189 psi) 2.0 N/mm² (290 psi) 1.6 N/mm² (232 psi) 11 N/mm² (1,595 psi) 1.5 N(mm² (250 psi) Tear strength 20 kN/m (114 lb/in) 13 kN/m (74 lb/in) 20 kN/m (114 lb/in) 20 kN/m (114 lb/in) 19 kN/m (108 lb/in) - 10 kN/m (57 lb/in) 19 kN/m (108 lb/in) 9 kN/m (51 lb/in) - 13 kN/m (74 lb/in) 15 20 15 15 20 20 (DIN EN ISO 527 / 5A) %: (DIN ISO 34): Movement capacity max. %: Temperature resistance: Specific forward resistance Paintable:*5 Building material category (DIN 4102): Possible primers: -40°C to +90°C (-40 to +194°F) briefly (approx. 2 h) to +130°C (+266°F) -40°C to +90°C (-40 to +194°F) - - 15 20 10 - 20 -40°C to +90°C (-40 to +194°F) -40°C to -40°C to -40°C to +90°C briefly (approx. +90°C +90°C (-40 to +194°F) 2 h) to +130°C (-40 to +194°F) (-40 to +194°F) (+266°F) -40°C to +80°C (-40 to +176°F) briefly. (approx. 2 h) to +120°C (+248°F) -40°C to +90°C (-40 to +194°F) briefly (approx. 2 h) to +120°C (+248°F) -40°C to +90°C (-40 to +194°F) briefly (approx. 2 h) to +120°C (+248°F) -30°C to +100°C (-22 to +212°F) -40°C to +90°C, briefly (approx. 30 min.) to +180°C 1.0 x 1010 Ω·cm 1.4 x 1011 Ω·cm 0.9 x 1012 Ω·cm - - - after complete curing after complete curing only “wet-on-wet” within 3 hrs. at the latest after material application with suitable paint coating systems (except alkyd resin paints) B2 B2 B2 - see primer selection table on page 127 only “wet-ononly “wet-on-wet” only “wet-on-wet”, wet”, within 3 within 3 hrs. at the hours at the latest within 3 hours at the latest after material latest after material after material application with application with application with suitable paint suitable paint coating suitable paint coating systems systems (except coating systems (except alkyd (except alkyd resin alkyd resin paints) resin paints) paints) B2 B2 B2 see primer selection see primer selection see primer selection table on page 127 table on page 127 table on page 127 - - only “wet-on-wet”, within 3 hours at the latest after material application with suitable paint coating systems (except alkyd resin paints) B2 see primer selection table on page 127 - only “wet-on-wet” only “wet-on-wet” only “wet-on-wet” within 3 hrs. at the within 3 hrs. at the within 3 hrs. at the latest after material latest after material latest after material application with application with application with suitable paint suitable paint suitable paint coating systems coating systems coating systems (except alkyd (except alkyd (except alkyd resin paints) resin paints) resin paints) E (EN 13501-1) B2 B2 see primer selection see primer selection see primer selection see primer selection table on page 127 table on page 127 table on page 127 table on page 127 Catalogue WEICON WEICON TOOLS® 50 650 (DIN ISO 7619): Other 42 Elongation at break Lubricants WEICON Adhesives and Sealants in cured condition Shore-A-Hardness 123
244 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.