REMS Akku-Press 22 V Page 3
Commercial customer offer**Top sellers from REMS
REMS Akku-Press 22 V Connected Handy, ultra-light, cordless radial press with Connected functionality via Wi-Fi radio standard and OLED display, for making press joints Ø 10 – 108 (110) mm Ø ⅜ – 4". The automatic locking of the pressing tongs, the electrically monitored closing position of the tong retaining bolt and the selectable ACC drive mode give the user additional safety. With a weight of only 3.4 kg and a length including V15 pressing tongs of only 36.3 cm this cordless radial press enters a new dimension. It can be used everywhere, free hand, over head, also in very confined spaces. Voice recordings for each pressing and voice recognition for converting the voice recordings into editable text allow them to be transferred to logs for easy documentation. 1 Complete assortment of REMS pressing tongs/ pressing rings for all common pressfitting systems, REMS cropping tongs M and REMS cable shears, see accessory. 2 Compact, handy, ultra-fast. Drive unit with battery only 3.4 kg. 3 Drive unit with pressing tongs V 15 only 36.3 cm long. Works anywhere, free-hand, overhead, also in particularly tight areas. 4 Optimum weight distribution for single-hand operation. Drive unit with inserted pressing tongs can be put down on the battery ready to pick up. 5 Ergonomically designed housing with strong carrying ring for a shoulder strap. Softgrip surfaces. 6 Two rows of LED work lights for illuminating the workplace as required, adjustable brightness in 4 stages and lighting time. 7 OLED display. 8 Machine status check with charging state indication by 2-coloured green/red LED. 9 Swivelling pressing tongs seat, rotation angle > 360 °. 10 Secure seating of pressing tongs/adapter tongs by automatic locking. Electrically monitored closing position of the tong retaining bolt. Also for other suitable makes of pressing tongs/ pressing rings. 11 Pressure monitoring and result display Electronic pressure sensor for thrust force monitoring. Monitoring and display of pressure and maximum pressure during the pressing process. Pressure analysis after the pressing process with result display in the OLED display and with coloured LEDs. Display of the pressuretime diagram of the performed pressing directly in the OLED display. Storage of the measured/ pressing data. 12 Anti-vibration system Special drive technology with weight balancing and soft grips for low-vibration, fatigue-free pressing. 13 Enormous thrust and pressing force for fast and perfect press jointing. Thrust force 32 kN. 14 High-performance, electro-hydraulic drive with powerful, brushless, maintenance free 22 V, 400 W battery motor, robust planetary gear, eccentric piston pump and compact highperformance hydraulic system. 15 Safety switch. 16 Selectable ACC drive mode When ACC drive mode is switched on, the drive unit ends the pressing process automatically, emits an acoustic signal (clicking) and automatically returns (automatic circuit control). When ACC mode is switched off, the drive unit stops just before reaching the required pressure to be able to be able to monitor complete closing of the pressing tongs, pressing ring and pressing segments better at the end of the pressing process. The pressing process must be continued by pressing the safety switch again. The drive unit ends the pressing process automatically, emits an acoustic signal (clicking) and automatically returns (automatic circuit control). 17 Li-Ion 22 V Technology Highly resistant Li-Ion 22 V battery with 2.5, 4.4, 5.0 or 9.0 Ah capacity, for long service life. Light and powerful. Li-Ion 22 V, 2.5 Ah, 54 Wh batteries for approx. 210 pressings, 4.4 Ah, 95 Wh for approx. 370 pressings, 5.0 Ah, 108 Wh for approx. 420 pressings, 9.0 Ah, 194 Wh for approx. 750 pressings Viega Profipress DN 15 with one battery charge*. 18 Graduated charging status check by coloured LEDs. 19 Operating temperature range – 10 to + 60 °C. No memory effect for maximum battery power. 20 Rapid charger 100 – 240 V, 90 W, 22 V or 290 W, 22 V for shorter charging times, as accessory. 21 Voltage supply 220 – 240 V, 22 V, 15 A output, for mains operation instead of Li-Ion battery 22 V, as accessory.
6 Pages | Valid until 12/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.