HAUPA - Main Catalogue Page 67
Commercial customer offer**Products from catalog page
Platzhalter Mechanical crimping pliers for tubular cable Platzhalter lugs INFO Crimping dies for standard cable lugs and compacted cables, WM pressing Mechanical crimping pliers for tubular cable lugs In this hand press the crimping stroke is produced by a number of hand lever movements. The transport ratchet starts the eccentric wheel moving and con-rods convert the eccentric turning motion into a straight-line stroke of the guide that runs in grooves. The bottom crimping inset is placed in the guide. It sits on an adjustment plate that is screwed on to the guide. This plate compensates for all the tolerances resulting from the manufacturing process or wear and tear. By turning the wheel on the handle in an anti-clockwise direction the crimping inset can be transported directly to the installation on the connecting part. Only then does the actual crimping process begin with the hand lever. When the required crimping depth has been reached the press releases the pressure spontaneously and the hinged cover can be opened to remove the connector. mm² 10 - 25 16 - 35 50 70 95 120 150 185 240 kg 0,221 0,320 0,349 0,331 0,330 2,486 0,308 0,317 0,300 PU 1 1 1 1 1 1 1 1 1 Crimping dies for uninsulated crimping terminals, mandrel shape pressing, DIN 46234 + DIN 46341 The crimping process can be interrupted if an error has been made in the classification of the inset, cable lug or cable. To do this swing the hand lever completely out, depress the ratchet and turn the forward feed lever backwards. Art. no. 215214 215216 215218 215220 215222 215224 215226 215228 The quality of the crimped connection is dependent on the choice of cable lug, the crimp inset and the correct choice of cable cross section. Crimping pliers mm² 10 - 70 95 - 150 10 - 70 16 - 35 25 - 50 95 120 150 kg 0,178 0,169 0,163 0,170 0,163 0,161 0,152 0,144 PU 1 1 1 1 1 1 1 1 kg 0,350 0,330 0,328 0,330 0,326 0,326 0,321 0,300 0,305 0,305 0,290 PU 1 1 1 1 1 1 1 1 1 1 1 Crimping dies precise tool with ratchet and built-in-force-locking device, interchangeable dies, easy to remove from the crimped lug by opening the crimping head • can be used anywhere • minimum strength required • broad application spectrum • precision drive • rational use Art. no. 215200 Art. no. 215204 215206 215208 215210 215212 215201 215203 215205 215207 mm² 10 - 240 for crimping terminals DIN, hexagon pressing kg 4,500 PU 1 kg 3,700 PU 1 Metal box Art. no. 215230 215232 215234 215236 215238 215240 215242 215244 215246 215248 215250 KZ 6 8 10 12 14 16 18 20 22 25 28 Cu 10 16 25 35 50 70 95 120 150 185 240 Al 16 25 35 50 70 95 - 120 150 185 for storing of crimping pliers and dies Art. no. 215202 ... convincing solutions HAUPA GmbH, Lange Str. 40, D-42857 Remscheid, Germany, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, E-mail: [email protected] 67
623 Pages | Valid until 08/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.