Tyrolit - Product range of diamond tools Page 335
Commercial customer offer**Top sellers from Tyrolit – Schleifmittelwerke
SAFETY 333 Application Avoid unintentional starting of the machine. Make sure that the machine is switched off before connecting to power supply. Secure the workpiece to prevent accidental slipping. Support plates or large workpieces in order to reduce the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Always wear personal safety equipment and eye protection. Wearing personal safety equipment, such as gloves, non-slip safety shoes, helmet and ear protection, always depending on nature and purpose of the tool, may reduce the risk of injury. Ensure adequate ventilation and protective measures that correspond to the material to be machined when working with cutting and rough grinding wheels. Maintain a firm grip on the machine and keep balance at all times. Bring your body into a position where you can intercept kickback forces. Do not position your head in line with the rotating wheel. Do not position your body in the area in which the machine will move in case of a kickback. If the cutting wheel gets jamed or when interrupting a cut for any reason, turn off the machine and hold the machine motionless until the wheel comes to a complete stop. Never attempt to remove the wheel from the cut while the wheel is in motion otherwise kickback may occur. Do not restart the cutting operation in the workpiece. Let the wheel reach full speed before you re-enter the cut. After turning off the machine, allow the wheel to come to rest naturally. Never use an “artificial” brake such as soil, wood pallets or shoes and never lay the machine down before the wheel has come to rest. The rotating wheel may grab the surface. For rotating grinding tools with diamond or boron nitride, the maximum permissible peripheral speeds according to EN13236 must be observed. Information on the maximum permissible speeds can be found in the laser signature of your diamond saw blade, as well as on request. For recommended speeds for wet drilling, see chapter wet drill bits page 23. Safety information Use gloves Use dust mask Only permitted for wet grinding Do not use damaged wheels Use eye protection Personal safety For dry applications Not permitted for side grinding Use ear protection Pay attention to the safety recommendations Not permitted for wet grinding No freehand work
348 Pages | Valid until 06/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.