Pneumax - Hauptkatalog Page 797
Commercial customer offer**Top sellers from Pneumax GmbH
Microbore cylinders according to standard ISO 6432 Series 1200 Threaded end caps cylinders Series 1200, Threaded end caps Construction characteristics End caps hard anodised aluminum Barrel anodised aluminium (brass for Ø8 and Ø10) Piston rod non magnetic piston : Ø8 - Ø10: stainless steel / Ø12 - Ø50: C43 chromed magnetic piston: Ø10 - 20: stainless steel / Ø25 - 50: C43 chromed Piston aluminium Seals Standard: NBR Oil resistant rubber, PUR Piston rod seals (HNBR or FPM seals available upon request) Mounting steel painted in cataphoresis Forks cadmium plated steel Single-acting springs steel for springs and stainless steel Cushioning length ø 16 - 20 - 25 - 32 - 40 - 50 mm 15 - 18 - 18 - 18 - 22 - 22 Technical characteristics Filtered air. No lubrication needed, if applied it shall be continuous. Max. pressure 10 bar Working temperature -5°C - +70°C with standard seals magnetic or non magnetic piston 3 -5°C - +80°C with FPM seals magnetic piston -5°C - +80°C with HNBR seals magnetic piston -5°C - +120°C with HNBR seals non magnetic piston -5°C - +150°C with FPM seals non magnetic piston Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Standard strokes Double acting version Ø8 - Ø10 : 15 - 25 - 50 - 75 - 80 - 100 mm Ø12 - Ø16 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 mm Ø20 - Ø25 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 mm Ø32 - Ø50 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 - 450 - 500 mm On request are available strokes up to: Ø8 - Ø10 : 250 mm Ø12 - Ø16 : 700 mm Ø20 - Ø50 : 1000 mm Single acting version Ø12 - Ø50 : up to stroke 40 mm On request are available strokes up to 200 mm Minimum and maximum springs load for single acting version Bore Ø12 - Ø20 Ø25 Ø32 Ø40 - Ø50 Min. load (N) 10 10 20 40 Max. load (N) 25 50 55 110 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3|1 Pneumatic actuatiOn Fluid
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.