Pneumax - Hauptkatalog Page 323
Commercial customer offer**Top sellers from Pneumax GmbH
ISO 5599-1 valves and solenoid valves Series 1000 - Size 1, 2 & 3 Series 1000 - Size 1, 2 & 3 General Use and maintenance this valves have an average life of 15 million cycles depending on the application and air quality. Filtered and lubricated air using specified lubricants will reduce the wear of the seals and ensures long and trouble free operation. Make sure that the conditions of use comply with the pressure, temperature etc. limits indicated and that the fastening screws are tightened with the following maximum torques on distributors serie 1010. Size 1 = 4 Nm Size 2 = 5 Nm Size 3 = 8 Nm repair kits including the spool complete with seals are available for overhauling the valves. However, although this is a simple operation it should be carried out by a competent person. ATTENTION: use hydraulic oil class H for lubrication such as MAGnA GC 32 (Castrol). Construction characteristics series 1000 body Operators spools seals spacer springs selectors series 1010 body Operators spools seals spacer Pistons springs Size 1 Zinc alloy Zinc alloy steel nbr technopolymer spring steel nbr Size 1 technopolymer technopolymer steel nbr technopolymer Aluminium spring steel Size 2 Aluminium Aluminium steel nbr Aluminium spring steel nbr Size 2 technopolymer technopolymer steel nbr technopolymer Aluminium spring steel Size 3 Aluminium Aluminium steel nbr technopolymer Aluminium spring steel Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 303 1 Air distributiOn 5 ways 2 or 3 positions distributors and electric distributors can be used mounted on individual or ganged bases. These standards are ISO 5599/1, according to which certain dimensions are mandatory, namely, the mounting surface, the pitch of the fastening screws, the characteristic of the electric pilot, the flow rate, the pneumatic connections, and so on. the design is based on the balanced spool principle with pneumatic or electropneumatic actuators and resetting by mechanically or pneumatically operated spring. the 3 position closed centres, are obtained by spring operation. the feed to the actuators on the distributors can be provided either by pressure intake from inlet 1(autofeed) or through the base from inlets 12 and 14 (external feed); there are two separate types of these distributors: one is the series 1000 and the other is the series 1010. the serie 1000 includes size 1 and 2 and are built of die-cast aluminium. the selection is made by turning a seal fitted between body and operator by 180°, so to utilize external-feed pilot or with internal feed. Ordering codes are referring to distributors with "M2" mechanics or solenoid valves "S" mounted. Coil are not included and have to be ordored separately (see Series 300). "S" homologated solenoid coil are available (see Series 300).
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.