Pneumax - Hauptkatalog Page 221
Commercial customer offer**Top sellers from Pneumax GmbH
Direct operated solenoid valves Series 300 Electric pilot CNOMO (coil not included) Mechanics with base for solenoid to be used where an electric pilot system is required. May be used on all sizes and is standardized as an interface on the distributor. The base is fitted with a manual control which is pulse actuated, without check, or with two stable positions, actuated by means of a screwdriver (pressing down and turning clockwise by 90°). Two different types of solenoids can be mounted on the stem, one in conformity with ISO standard size 30x38 and ISO 4400 (DIN 43650) electrical connection, and a compact one size 22x27, having the same performance but at lower price. The technical characteristics of the latter are described in the catalogue, series 300, and refer to MB solenoids. The base is fitted with screws (M4x30) for fastening to the distributor. 1 M4 P = Manual 1 position R = Manual 2 positions 7,5 73,5 M 3 = Mechanics CNOMO 4 = 2-W Mechanics CNOMO 32,5 5 21 30 2 3 A = 33 (with MB solenoid) A = 38 (with MC solenoid) 1 Weight 49 gr. General characteristics Structural Pneumatic Electric Body Stem Cores Springs Shutters Other seals Manual control Fluid Working pressure Fluid ambient temperature Flow rate at 6 bar with ∆p 1 bar Nominal flow cross section Power consumption (inrush) - A.C. Power consumption holding - D.C. Power consumption holding - A.C. Operating voltage tolerance Response time opening * Response time closing * Insulation of the copper wire Insulation of the coil Connector protection Cable protection Thermoplastic polyester Nickel-platted brass AISI 430F stainless steel AISI 302 stainless steel FPM NBR Nickel-platted brass Air, Neutral gases 0-10 bar -5°C - +50°C 53 NI/min (20 NI/min for 2 W) 1,3 mm (0,9 mm for 2 W) 13 VA (2 W) 4W 8,5 VA ±10% 13 ms 5 ms H F IP 65 DIN 43650 “A” FORM (*) "Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power - Directional control valves - Measurement of shifting time" Ordering code MC5 MC9 MC56 MC57 MC58 Available voltages Coil 30 24 D.C. 24 D.C. (2 Watt) 24/50-60 Hz 110/50-60 Hz 230/50-60 Hz 38 30 Coil Weight 110 gr. Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 201 Air distributiOn A Ordering code
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.